On Tue, Mar 26, 2019 at 06:12 Kristijan Vrban <vrban.lkml@gmail.com> wrote:

And again one more kamctl trap file where

set_reply_no_connect was set.

Am Di., 26. März 2019 um 08:53 Uhr schrieb Kristijan Vrban
<vrban.lkml@gmail.com>:
>
> Attached also the output of kamctl trap
>
> Am Di., 26. März 2019 um 08:42 Uhr schrieb Kristijan Vrban
> <vrban.lkml@gmail.com>:
> >
> > > Have you done a test with tools such as sipp, or was this happening
> > > after a while, with usual phones registering?
> >
> > Usual variety of devices registering via TLS. But i can not exclude
> > that some devices displaying behavioural problems.
> >
> > > Can you list the tcp connections and see if they are listed?
> > > kamctl tcp core.tcp_list
> >
> > Need Kex module for that? So i can deliver next time. But when i do
> > "lsof -u kamailio |grep TCP"
> > i get a long list of more then 2000 lines with:
> >
> > ...
> > kamailio 37561 kamailio 2105u sock 0,9 0t0
> > 27856287 protocol: TCP
> > kamailio 37561 kamailio 2106u sock 0,9 0t0
> > 27856305 protocol: TCP
> > kamailio 37561 kamailio 2107u sock 0,9 0t0
> > 27856306 protocol: TCP
> > kamailio 37561 kamailio 2108u sock 0,9 0t0
> > 27856914 protocol: TCP
> > ...
> >
> > So about the time Kamailio created a lot of socket in the TCP domain,
> > but which are not bound to any port (eg via connect(2) or listen(2) or
> > bind(2))
> > Until we get to the maximum number of 2048 connections.
> >
> > Best
> > Kristijan
> >
> > Am Mo., 25. März 2019 um 14:27 Uhr schrieb Daniel-Constantin Mierla
> > <miconda@gmail.com>:
> > >
> > > Have you done a test with tools such as sipp, or was this happening
> > > after a while, with usual phones registering?
> > >
> > > Can you list the tcp connections and see if they are listed?
> > >
> > > kamctl tcp core.tcp_list
> > >
> > > Cheers,
> > > Daniel
> > >
> > > On 25.03.19 08:03, Kristijan Vrban wrote:
> > > >> The solution here is to use set_reply_no_connect()
> > > > implemented it. Now the issue has shifted to:
> > > >
> > > > ERROR: <core> [core/tcp_main.c:3959]: handle_new_connect(): maximum
> > > > number of connections exceeded: 2048/2048
> > > >
> > > > But not a single TCP connection is active between Kamailio and any
> > > > device. Seems this counter for maximum number of connections
> > > > now has an issue?
> > > >
> > > > Kristijan
> > > >
> > > > Am Mi., 20. März 2019 um 15:07 Uhr schrieb Daniel-Constantin Mierla
> > > > <miconda@gmail.com>:
> > > >> Hello,
> > > >>
> > > >> based on the trap output I think I could figure out what happened there.
> > > >>
> > > >> You have tcp_children to very low value (1 or so), the problem is not
> > > >> actually that one, but the fact that the connection to upstream (the
> > > >> device/app sending the request) was closed after receiving the request
> > > >> and routing of the reply gets stuck in the way of:
> > > >>
> > > >> - a reply is received and has to be forwarded
> > > >> - connection was lost, so Kamailio tries to establish a new one, but
> > > >> takes time till fails because the upstream is behind nat or so based on
> > > >> the via header:
> > > >>
> > > >> Via: SIP/2.0/TLS
> > > >> 10.1.0.4:10002;rport=55229;received=13.94.188.218;branch=z9hG4bK-3336-7f2927bfd703ae907348edff3611bfc9
> > > >>
> > > >> - the reply is retransmitted and gets to another worker, which tries
> > > >> to forward it again, but discovers a connection structure for that
> > > >> destination exists (created by previous reply worker) and now waits for
> > > >> the connection to be released (or better said, for the mutex on writing
> > > >> buffer to be unlocked)
> > > >>
> > > >> - as the second reply waits, there can be other retransmissions of the
> > > >> reply ending up in other workers stuck on waiting for the mutex of the
> > > >> connection write buffer
> > > >>
> > > >> The solution here is to use set_reply_no_connect() -- you can put it
> > > >> first in request_route block. I think this would be a good addition to
> > > >> the default configuration file as well, IMO, the sip server should not
> > > >> connect for sending replies and should do it also for requests that go
> > > >> behind nat.
> > > >>
> > > >> Cheers,
> > > >> Daniel
> > > >>
> > > >> On 19.03.19 10:53, Kristijan Vrban wrote:
> > > >>> So i had again the situation. But this time, incoming udp was
> > > >>> affected. Kamailio was sending out OPTIONS (via dispatcher module) to
> > > >>> a group of asterisk machines
> > > >>> but the 200 OK reply to the OPTIONS where not processed, so the
> > > >>> dispatcher module set all asterisk to inactive, even though they
> > > >>> replied 200 OK
> > > >>>
> > > >>> Attached the output of kamctl trap during the situation. Hope there is
> > > >>> any useful in it. Because after "kamctl trap" it was working again
> > > >>> without kamailio restart.
> > > >>>
> > > >>> Best
> > > >>> Kristijan
> > > >>>
> > > >>> Am Mo., 18. März 2019 um 12:27 Uhr schrieb Daniel-Constantin Mierla
> > > >>> <miconda@gmail.com>:
> > > >>>> Hello,
> > > >>>>
> > > >>>> setting tcp_children=1 is not a god option for scallability, practically
> > > >>>> you set kamailio to process a single tcp message at one time, on high
> > > >>>> traffic, that won't work well.
> > > >>>>
> > > >>>> Maybe try to set tcp_children to 2 or 4, that should make an eventual
> > > >>>> race appear faster.
> > > >>>>
> > > >>>> Regarding the pid, if it is an outgoing connection, then it can be
> > > >>>> created by any worker process, including a UDP worker, if that was the
> > > >>>> one receiving the sip message over udp and sends it out via tcp.
> > > >>>>
> > > >>>> Cheers,
> > > >>>> Daniel
> > > >>>>
> > > >>>> On 18.03.19 10:09, Kristijan Vrban wrote:
> > > >>>>> Hi Daniel,
> > > >>>>>
> > > >>>>> for testing, i now had set: "tcp_children=1" and so far this issue did not occur
> > > >>>>> ever since. So now value to provide for "kamctl trap" yet.
> > > >>>>>
> > > >>>>> "kamctl ps" show this two process to handle tcp:
> > > >>>>>
> > > >>>>> ...
> > > >>>>> }, {
> > > >>>>> "IDX": 25,
> > > >>>>> "PID": 71929,
> > > >>>>> "DSC": "tcp receiver (generic) child=0"
> > > >>>>> }, {
> > > >>>>> "IDX": 26,
> > > >>>>> "PID": 71933,
> > > >>>>> "DSC": "tcp main process"
> > > >>>>> }
> > > >>>>> ...
> > > >>>>>
> > > >>>>>
> > > >>>>> Ok, but then is was wondering to see a TCP connection on a udp receiver child:
> > > >>>>>
> > > >>>>>
> > > >>>>> netstat -ntp |grep 5061
> > > >>>>>
> > > >>>>> ...
> > > >>>>> tcp 0 0 172.17.217.10:5061 195.70.114.125:18252
> > > >>>>> ESTABLISHED 71895/kamailio
> > > >>>>> ...
> > > >>>>>
> > > >>>>> An pid 71895 is:
> > > >>>>>
> > > >>>>> }, {
> > > >>>>> "IDX": 3,
> > > >>>>> "PID": 71895,
> > > >>>>> "DSC": "udp receiver child=2 sock=127.0.0.1:5060"
> > > >>>>> }, {
> > > >>>>>
> > > >>>>>
> > > >>>>>
> > > >>>>> And if i look into it via "lsof -p 71895" (the udp receiver child)
> > > >>>>>
> > > >>>>> ...
> > > >>>>> kamailio 71895 kamailio 14u sock 0,9 0t0
> > > >>>>> 8856085 protocol: TCP
> > > >>>>> kamailio 71895 kamailio 15u sock 0,9 0t0
> > > >>>>> 8886886 protocol: TCP
> > > >>>>> kamailio 71895 kamailio 16u sock 0,9 0t0
> > > >>>>> 8854886 protocol: TCP
> > > >>>>> kamailio 71895 kamailio 17u sock 0,9 0t0
> > > >>>>> 8828915 protocol: TCP
> > > >>>>> kamailio 71895 kamailio 18u unix 0x000000005f73cb91 0t0
> > > >>>>> 1680314 type=DGRAM
> > > >>>>> kamailio 71895 kamailio 19u IPv4 1846523 0t0
> > > >>>>> TCP kamailio-preview:sip-tls->XXX:18252 (ESTABLISHED)
> > > >>>>> kamailio 71895 kamailio 20u sock 0,9 0t0
> > > >>>>> 8887192 protocol: TCP
> > > >>>>> kamailio 71895 kamailio 21u sock 0,9 0t0
> > > >>>>> 8813634 protocol: TCP
> > > >>>>> kamailio 71895 kamailio 22u unix 0x00000000c19bd102 0t0
> > > >>>>> 1681407 type=STREAM
> > > >>>>> kamailio 71895 kamailio 23u sock 0,9 0t0
> > > >>>>> 8850488 protocol: TCP
> > > >>>>> ...
> > > >>>>>
> > > >>>>> Not only the ESTABLISHED TCP session. But also this empty sockets
> > > >>>>> "protocol: TCP"
> > > >>>>> What are they doing there in the udp receiver? Is that how it's supposed to be?
> > > >>>>>
> > > >>>>> Kristijan
> > > >>>>>
> > > >>>>> Am Do., 14. März 2019 um 14:48 Uhr schrieb Daniel-Constantin Mierla
> > > >>>>> <miconda@gmail.com>:
> > > >>>>>> Can you get file written by `kamctl trap`? It should have the backtrace
> > > >>>>>> for all kamailio processes. You need latest kamailio 5.2.
> > > >>>>>>
> > > >>>>>> Also, get the output for: kamctl ps
> > > >>>>>>
> > > >>>>>> Cheers,
> > > >>>>>> Daniel
> > > >>>>>>
> > > >>>>>> On 14.03.19 13:52, Kristijan Vrban wrote:
> > > >>>>>>> When i attach via gdb to one of the tcp worker, i see this:
> > > >>>>>>>
> > > >>>>>>> (gdb) bt
> > > >>>>>>> #0 0x00007fdaf4d14470 in futex_wait (private=<optimized out>,
> > > >>>>>>> expected=1, futex_word=0x7fdaeca92f8c) at
> > > >>>>>>> ../sysdeps/unix/sysv/linux/futex-internal.h:61
> > > >>>>>>> #1 futex_wait_simple (private=<optimized out>, expected=1,
> > > >>>>>>> futex_word=0x7fdaeca92f8c) at ../sysdeps/nptl/futex-internal.h:135
> > > >>>>>>> #2 __pthread_rwlock_wrlock_slow (rwlock=0x7fdaeca92f80) at
> > > >>>>>>> pthread_rwlock_wrlock.c:67
> > > >>>>>>> #3 0x00007fdaf0912ee9 in CRYPTO_THREAD_write_lock () from
> > > >>>>>>> /usr/lib/x86_64-linux-gnu/libcrypto.so.1.1
> > > >>>>>>> #4 0x00007fdaf08e1c08 in ?? () from /usr/lib/x86_64-linux-gnu/libcrypto.so.1.1
> > > >>>>>>> #5 0x00007fdaf08a6f69 in ?? () from /usr/lib/x86_64-linux-gnu/libcrypto.so.1.1
> > > >>>>>>> #6 0x00007fdaf08b36c7 in EVP_CIPHER_CTX_ctrl () from
> > > >>>>>>> /usr/lib/x86_64-linux-gnu/libcrypto.so.1.1
> > > >>>>>>> #7 0x00007fdaf0c31144 in ?? () from /usr/lib/x86_64-linux-gnu/libssl.so.1.1
> > > >>>>>>> #8 0x00007fdaf0c2bddb in ?? () from /usr/lib/x86_64-linux-gnu/libssl.so.1.1
> > > >>>>>>> #9 0x00007fdaf0c22858 in ?? () from /usr/lib/x86_64-linux-gnu/libssl.so.1.1
> > > >>>>>>> #10 0x00007fdaf0c1af61 in SSL_do_handshake () from
> > > >>>>>>> /usr/lib/x86_64-linux-gnu/libssl.so.1.1
> > > >>>>>>> #11 0x00007fdaf0e8d31b in tls_accept (c=0x7fdaed26fa98,
> > > >>>>>>> error=0x7ffffe2a2df0) at tls_server.c:422
> > > >>>>>>> #12 0x00007fdaf0e96a1b in tls_read_f (c=0x7fdaed26fa98,
> > > >>>>>>> flags=0x7ffffe2c318c) at tls_server.c:1116
> > > >>>>>>> #13 0x0000556ead5e7c46 in tcp_read_headers (c=0x7fdaed26fa98,
> > > >>>>>>> read_flags=0x7ffffe2c318c) at core/tcp_read.c:469
> > > >>>>>>> #14 0x0000556ead5ef9cb in tcp_read_req (con=0x7fdaed26fa98,
> > > >>>>>>> bytes_read=0x7ffffe2c3184, read_flags=0x7ffffe2c318c) at
> > > >>>>>>> core/tcp_read.c:1496
> > > >>>>>>> #15 0x0000556ead5f575f in handle_io (fm=0x7fdaf597aa98, events=1,
> > > >>>>>>> idx=-1) at core/tcp_read.c:1862
> > > >>>>>>> #16 0x0000556ead5e2053 in io_wait_loop_epoll (h=0x556eadaaeec0 <io_w>,
> > > >>>>>>> t=2, repeat=0) at core/io_wait.h:1065
> > > >>>>>>> #17 0x0000556ead5f6b35 in tcp_receive_loop (unix_sock=49) at
> > > >>>>>>> core/tcp_read.c:1974
> > > >>>>>>> #18 0x0000556ead4c8e24 in tcp_init_children () at core/tcp_main.c:4853
> > > >>>>>>> #19 0x0000556ead3c352a in main_loop () at main.c:1735
> > > >>>>>>> #20 0x0000556ead3ca5f8 in main (argc=13, argv=0x7ffffe2c3828) at main.c:2675
> > > >>>>>>>
> > > >>>>>>>
> > > >>>>>>>
> > > >>>>>>>
> > > >>>>>>>
> > > >>>>>>>
> > > >>>>>>>
> > > >>>>>>> Am Do., 14. März 2019 um 13:41 Uhr schrieb Kristijan Vrban
> > > >>>>>>> <vrban.lkml@gmail.com>:
> > > >>>>>>>> Hi, with full debug is see this in log for every incoming TCP SIP request:
> > > >>>>>>>>
> > > >>>>>>>> Mar 14 12:10:15 kamailio-preview /usr/sbin/kamailio[17940]: DEBUG:
> > > >>>>>>>> <core> [core/tcp_main.c:3871]: send2child(): WARNING: no free tcp
> > > >>>>>>>> receiver, connection passed to the least busy one (105)
> > > >>>>>>>> Mar 14 12:10:15 kamailio-preview /usr/sbin/kamailio[17940]: DEBUG:
> > > >>>>>>>> <core> [core/tcp_main.c:3875]: send2child(): selected tcp worker 2
> > > >>>>>>>> 27(17937) for activity on [tls:172.17.217.10:5061], 0x7fdaeda8f928
> > > >>>>>>>>
> > > >>>>>>>> So the Kamailio TCP process is working, and received TCP traffic. But
> > > >>>>>>>> the tcp workers are somehow busy.
> > > >>>>>>>>
> > > >>>>>>>> When i attach via strace to the TCP worker, i do not see any activity. Just:
> > > >>>>>>>>
> > > >>>>>>>> futex(0x7fdaeca92f8c, FUTEX_WAIT_PRIVATE, 1, NULL
> > > >>>>>>>>
> > > >>>>>>>> and nothing, even when i see the main tcp process choose this worker process.
> > > >>>>>>>>
> > > >>>>>>>> Kristijan
> > > >>>>>>>>
> > > >>>>>>>> Am Mi., 27. Feb. 2019 um 15:14 Uhr schrieb Kristijan Vrban
> > > >>>>>>>> <vrban.lkml@gmail.com>:
> > > >>>>>>>>> first of all thanks for the feedback. i prepared our system now to run
> > > >>>>>>>>> with debug=3
> > > >>>>>>>>> I hope to see more then then.
> > > >>>>>>>>>
> > > >>>>>>>>> Am Mi., 27. Feb. 2019 um 11:53 Uhr schrieb Kristijan Vrban
> > > >>>>>>>>> <vrban.lkml@gmail.com>:
> > > >>>>>>>>>> Hi kamailios,
> > > >>>>>>>>>>
> > > >>>>>>>>>> i have a creepy situation with v5.2.1 stable Kamilio. After a day or
> > > >>>>>>>>>> so, Kamailio stop to process incoming SIP traffic via TCP. The
> > > >>>>>>>>>> incoming TCP network packages get TCP-ACK from the OS (Debian 9,
> > > >>>>>>>>>> 4.18.0-15-generic-Linux) but Kamailio does not show any processing for
> > > >>>>>>>>>> the SIP-Traffic incoming via TCP. No logs, nothing. While traffic via
> > > >>>>>>>>>> UDP is working just totally fine.
> > > >>>>>>>>>>
> > > >>>>>>>>>> When i look via command "netstat -ntp" is see, that the Recv-Q get
> > > >>>>>>>>>> bigger and bigger. e.g.:
> > > >>>>>>>>>>
> > > >>>>>>>>>> Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program
> > > >>>>>>>>>> name tcp 4566 0 172.17.217.12:5060 xxx.xxx.xxx.xxx:57252 ESTABLISHED
> > > >>>>>>>>>> 31347/kamailio
> > > >>>>>>>>>>
> > > >>>>>>>>>> After Kamailio restart, all is working fine again for a day. We have
> > > >>>>>>>>>> maybe 10-20 devices online via TCP and low call volume (1-2 call per
> > > >>>>>>>>>> minute). The only settings for tcp we have is "tcp_delayed_ack=no"
> > > >>>>>>>>>>
> > > >>>>>>>>>> How to could we debug this situation? Again, no error, no warings in
> > > >>>>>>>>>> the log. Just nothing.
> > > >>>>>>>>>>
> > > >>>>>>>>>> Kristijan
> > > >>>>>>> _______________________________________________
> > > >>>>>>> Kamailio (SER) - Users Mailing List
> > > >>>>>>> sr-users@lists.kamailio.org
> > > >>>>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
> > > >>>>>> --
> > > >>>>>> Daniel-Constantin Mierla -- www.asipto.com
> > > >>>>>> www.twitter.com/miconda -- www.linkedin.com/in/miconda
> > > >>>>>> Kamailio World Conference - May 6-8, 2019 -- www.kamailioworld.com
> > > >>>>>> Kamailio Advanced Training - Mar 25-27, 2019, in Washington, DC, USA -- www.asipto.com
> > > >>>>>>
> > > >>>>> _______________________________________________
> > > >>>>> Kamailio (SER) - Users Mailing List
> > > >>>>> sr-users@lists.kamailio.org
> > > >>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
> > > >>>> --
> > > >>>> Daniel-Constantin Mierla -- www.asipto.com
> > > >>>> www.twitter.com/miconda -- www.linkedin.com/in/miconda
> > > >>>> Kamailio World Conference - May 6-8, 2019 -- www.kamailioworld.com
> > > >>>> Kamailio Advanced Training - Mar 25-27, 2019, in Washington, DC, USA -- www.asipto.com
> > > >>>>
> > > >> --
> > > >> Daniel-Constantin Mierla -- www.asipto.com
> > > >> www.twitter.com/miconda -- www.linkedin.com/in/miconda
> > > >> Kamailio World Conference - May 6-8, 2019 -- www.kamailioworld.com
> > > >> Kamailio Advanced Training - Mar 25-27, 2019, in Washington, DC, USA -- www.asipto.com
> > > >>
> > > --
> > > Daniel-Constantin Mierla -- www.asipto.com
> > > www.twitter.com/miconda -- www.linkedin.com/in/miconda
> > > Kamailio World Conference - May 6-8, 2019 -- www.kamailioworld.com
> > > Kamailio Advanced Training - Mar 25-27, 2019, in Washington, DC, USA -- www.asipto.com
> > >
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users