Hi list

i'm testing uac module with a did provider, apparently it works the first register, when it's going to refresh the session the register packed don't send the proxy-authorization header.

My kamailio is 4.0, the debian wheezy repository

this is my parameter config:

#!ifdef WITH_UAC
#---------- uac params ----------#
modparam("uac", "reg_db_url",DBURL)
modparam("uac", "reg_timer_interval",60)
modparam("uac", "reg_retry_interval",120)
modparam("uac", "reg_db_table", "uacreg")
modparam("uac","credential","username:domain:password")
modparam("uac","auth_realm_avp","$avp(i:10)")
modparam("uac","auth_username_avp","$avp(i:11)")
modparam("uac","auth_password_avp","$avp(i:12)")
modparam("uac","restore_mode","auto")
modparam("uac", "reg_contact_addr", "xx.xx.xx:5060")
#!endif

 


this is the route block:

  if(uac_reg_request_to("$fU", 1))
        {
        xlog("L_NOTICE", "Found remote user [$rU] on [$rd] via [$du]");
        t_on_failure("REMOTE_AUTH");

        t_relay();
        }

         inside route[LOCATION] at the end:

#!ifdef WITH_UAC

        if(uac_reg_lookup("$rU", "$ru")) {
        xlog("request from a remote SIP provider [$ou => $ru]\n");
        }
                lookup("location");

#!endif



failure_route[REMOTE_AUTH] {
        if ($T_reply_code == 401 or $T_reply_code == 407) {
                xlog("L_NOTICE", "Remote asked for authentication");
                uac_auth();
                }
        }


this is the error log by syslog

ct 11 13:52:47 rene /usr/sbin/kamailio[7413]: INFO: <script>: Routing locally generated REGISTER to<sip:ippbx.xxxxx.com>
Oct 11 13:52:47 rene /usr/sbin/kamailio[7400]: ERROR: uac [uac_reg.c:537]: uac_reg_tm_callback(): authentication failed for <2127207679>

 
this is sip trace with first register:

Frame 209: 671 bytes on wire (5368 bits), 671 bytes captured (5368 bits) on interface 0
Ethernet II, Src: Hewlett-_6b:6e:49 (10:1f:74:6b:6e:49), Dst: Cisco_7f:1e:69 (00:13:1a:7f:1e:69)
Internet Protocol Version 4, Src: 10.20.8.45 (10.20.8.45), Dst: xx.xx.xx.xx (xx.xx.xx.xx)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
    Request-Line: REGISTER sip:ippbx.xxxxx.com SIP/2.0
    Message Header
        Via: SIP/2.0/UDP 10.20.8.45;branch=z9hG4bKb278.906502e4.0
        To: sip:5201341115@ippbx.xxxxx.com
        From: sip:5201341115@ippbx.xxxxx.com;tag=533cb9e91f4b999cf76861cbb9ed54ed-4cad
        CSeq: 11 REGISTER
        Call-ID: 2e81fffd-7628@127.0.0.1
        Max-Forwards: 70
        Content-Length: 0
        User-Agent: kamailio (4.0.3 (i386/linux))
        Contact: <sip:01133212720@xxx.xxx.xxx:5060>
        Expires: 60
        Proxy-Authorization: Digest username="1341115", realm="xxxxx", nonce="5DB4B614FCD76AD44FFFC3BEAECBDA9B", uri="sip:ippbx.xxxxx.com", response="d7d38055e339a2554cf2bb7e79e9b6f4", algorithm=MD5




this is sip trace with the second register:

Frame 681: 468 bytes on wire (3744 bits), 468 bytes captured (3744 bits) on interface 0
Ethernet II, Src: Hewlett-_6b:6e:49 (10:1f:74:6b:6e:49), Dst: Cisco_7f:1e:69 (00:13:1a:7f:1e:69)
Internet Protocol Version 4, Src: 10.20.8.45 (10.20.8.45), Dst: xx.xx.xx.xx (66.33.146.52)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
    Request-Line: REGISTER sip:ippbx.xxxxx.com SIP/2.0
    Message Header
        Via: SIP/2.0/UDP 10.20.8.45;branch=z9hG4bKb278.a06502e4.0
        To: sip:5201341115@ippbx.xxxxx.com
        From: sip:5201341115@ippbx.xxxxx.com;tag=533cb9e91f4b999cf76861cbb9ed54ed-4d45
        CSeq: 10 REGISTER
        Call-ID: 2e81fffe-7628@127.0.0.1
        Max-Forwards: 70
        Content-Length: 0
        User-Agent: kamailio (4.0.3 (i386/linux))
        Contact:
<sip:01133212720@xxx.xxx.xxx:5060>
       Expires: 60

there isn't proxy-authorization Header

Any help i don't know what it's wrong

Best Regards
Rene  Montilva