We have tested this PR using the Linphone app.
So your case will be resolved using this PR.
Need to enable HAproxy protocol headers.
On Wed, May 22, 2024 at 4:36 PM Sergey Safarov <s.safarov(a)gmail.com> wrote:
Please try Kamailio PR
https://github.com/kamailio/kamailio/pull/3731
We have developed this PR for use case you have described.
We have tested Route and Record-Route headers not Via.
So will provide some review for this PR then will be fine.
On Wed, May 22, 2024 at 2:22 PM David Villasmil <
david.villasmil.work(a)gmail.com> wrote:
> Hello Sergey,
>
> Thanks for the suggestion. Not sure if his is what i'm looking for, allow
> me to explain further:
> We set up an NetworkLoadBalancer on AWS to offload tls on it. This Load
> balancer is a TLS listener on the outside and a TCP connection to the proxy
> inside.
> So when sending an INVITE to the connected client, the via has a TCP
> protocol like
>
> Via: SIP/2.0/TCP
> mydomain:port;branch=z9hG4bKf176.53ac8af0d7090a31e44548f15ea420ff.0
>
> and the client (linphone) disconnects and tries to contact the proxy on
> that address on a TCP socket, which doesn't exist. I tried many
> solutions none of which actually work... last one setting $du =$du +
> ";transport=tls" and forcing the socket to the TCP socket to the load
> balancer, but of course i'm getting warnings about this.
>
> is this something that PR (not merged) would be addressing, i didn't see
> that.
> If not, is there a way of doing this without any trickery?
>
> Thanks!
>
> Regards,
>
> David Villasmil
> email: david.villasmil.work(a)gmail.com
> phone: +34669448337
>
>
> On Wed, May 22, 2024 at 12:16 PM Sergey Safarov <s.safarov(a)gmail.com>
> wrote:
>
>> Probable you need this PR
>>
https://github.com/kamailio/kamailio/pull/3810
>>
>> Or you can try
>>
https://github.com/kamailio/kamailio/pull/3731
>> In this PR we faced the same issue and solved this.
>>
>>
>> On Wed, May 22, 2024 at 3:43 AM David Villasmil via sr-users <
>> sr-users(a)lists.kamailio.org> wrote:
>>
>>> Hello Anthony, did you solve this problem? I'm facing the same problem
>>>
>>> Thanks!
>>> Regards,
>>>
>>> David Villasmil
>>> email: david.villasmil.work(a)gmail.com
>>> phone: +34669448337
>>>
>>>
>>> On Mon, Feb 5, 2018 at 5:57 AM Anthony Alba <ascanio.alba7(a)gmail.com>
>>> wrote:
>>>
>>>> I have kamailio behind a TLS termination proxy so the sockets are
>>>> correctly deduced to be TCP. However the clients only talk TLS to the
proxy
>>>> and are confused when the top Via header added by Kamailio is TCP. Is
there
>>>> a way for Kamailio to forcibly pretend its protocol is TLS? Like
>>>> advertised_address but "advertised_protocol" instead.
>>>>
>>>> (With pjsip testing: it has a flag use_tls which ignores TCP from
>>>> Kamailio and continues to use the persistent TLS transport to proxy.
>>>> Linphone fails because it tries to honor TCP in Via and is unable to
>>>> establish TCP transport).
>>>>
>>>> BTW I am using t_relay_to_tcp so Kamailio will return traffic to the
>>>> proxy as TCP even though the contact addresses specify transport=TLS.
>>>> _______________________________________________
>>>> Kamailio (SER) - Users Mailing List
>>>> sr-users(a)lists.kamailio.org
>>>>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>>>
>>> __________________________________________________________
>>> Kamailio - Users Mailing List - Non Commercial Discussions
>>> To unsubscribe send an email to sr-users-leave(a)lists.kamailio.org
>>> Important: keep the mailing list in the recipients, do not reply only
>>> to the sender!
>>> Edit mailing list options or unsubscribe:
>>>
>>