Harry,

I tried reinstall ser-0.8.14 and rtpproxy in same box, i create two start script for ser and rtpproxy :

for ser

/usr/local/bin/ser start

for rtpproxy

cd /

./usr/local/bin/rtpproxy

and the ser.cfg, i following the ser-0.9.0 nathelper.cfg, but i tried connect both softphone outside the internet and behind NAT, but "No Voice" and "auto hang-up" !

Please help to fix the problem !

for ser.cfg

#
# $Id: nathelper.cfg,v 1.1 2003/11/10 14:15:36 janakj Exp $
#
# simple quick-start config script including nathelper support

# This default script includes nathelper support. To make it work
# you will also have to install Maxim's RTP proxy. The proxy is enforced
# if one of the parties is behind a NAT.
#
# If you have an endpoing in the public internet which is known to
# support symmetric RTP (Cisco PSTN gateway or voicemail, for example),
# then you don't have to force RTP proxy. If you don't want to enforce
# RTP proxy for some destinations than simply use t_relay() instead of
# route(1)
#
# Sections marked with !! Nathelper contain modifications for nathelper
#
# NOTE !! This config is EXPERIMENTAL !
#
# ----------- global configuration parameters ------------------------

debug=3 # debug level (cmd line: -dddddddddd)
fork=yes
log_stderror=no # (cmd line: -E)

/* Uncomment these lines to enter debugging mode
fork=no
log_stderror=yes
*/

check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database
#loadmodule "/usr/local/lib/ser/modules/mysql.so"

loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/textops.so"

# Uncomment this if you want digest authentication
# mysql.so must be loaded !
#loadmodule "/usr/local/lib/ser/modules/auth.so"
#loadmodule "/usr/local/lib/ser/modules/auth_db.so"

# !! Nathelper
loadmodule "/usr/local/lib/ser/modules/nathelper.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

modparam("usrloc", "db_mode", 0)

# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
#modparam("usrloc", "db_mode", 2)

# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
#modparam("auth_db", "password_column", "password")

# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)

# !! Nathelper
modparam("registrar", "nat_flag", 6)
modparam("nathelper", "natping_interval", 30) # Ping interval 30 s
modparam("nathelper", "ping_nated_only", 1) # Ping only clients behind NAT

# ------------------------- request routing logic -------------------

# main routing logic

route{

# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
  sl_send_reply("483","Too Many Hops");
  break;
};
if (msg:len >= max_len ) {
  sl_send_reply("513", "Message too big");
  break;
};

        # !! Nathelper
# Special handling for NATed clients; first, NAT test is
# executed: it looks for via!=received and RFC1918 addresses
# in Contact (may fail if line-folding is used); also,
# the received test should, if completed, should check all
# vias for rpesence of received
if (nat_uac_test("3")) {
  # Allow RR-ed requests, as these may indicate that
  # a NAT-enabled proxy takes care of it; unless it is
  # a REGISTER

if (method == "REGISTER" || ! search("^Record-Route:")) {
log("LOG: Someone trying to register from private IP, rewriting\n");

      # This will work only for user agents that support symmetric
      # communication. We tested quite many of them and majority is
      # smart enough to be symmetric. In some phones it takes a configuration
      # option. With Cisco 7960, it is called NAT_Enable=Yes, with kphone it is
      # called "symmetric media" and "symmetric signalling".

      fix_nated_contact(); # Rewrite contact with source IP of signalling
      if (method == "INVITE") {
          fix_nated_sdp("1"); # Add direction=active to SDP
      };
      force_rport(); # Add rport parameter to topmost Via
      setflag(6);    # Mark as NATed
  };
};

# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
if (!method=="REGISTER") record_route();

# subsequent messages withing a dialog should take the
# path determined by record-routing
if (loose_route()) {
  # mark routing logic in request
  append_hf("P-hint: rr-enforced\r\n");
  route(1);
  break;
};

if (!uri==myself) {
  # mark routing logic in request
  append_hf("P-hint: outbound\r\n");
  route(1);
  break;
};

# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
if (uri==myself) {

if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication
#   if (!www_authorize("iptel.org", "subscriber")) {
#    www_challenge("iptel.org", "0");
#    break;
#   };

   save("location");
   break;
  };

  lookup("aliases");
  if (!uri==myself) {
   append_hf("P-hint: outbound alias\r\n");
   route(1);
   break;
  };

  # native SIP destinations are handled using our USRLOC DB
  if (!lookup("location")) {
   sl_send_reply("404", "Not Found");
   break;
  };
};
append_hf("P-hint: usrloc applied\r\n");
route(1);
}

route[1]
{
# !! Nathelper
if (uri=~"[@:](192\.168\.|10\.|172\.(1[6-9]|2[0-9]|3[0-1])\.)" && !search("^Route:")){
     sl_send_reply("479", "We don't forward to private IP addresses");
     break;
        };

# if client or server know to be behind a NAT, enable relay
if (isflagset(6)) {
     force_rtp_proxy();
};

# NAT processing of replies; apply to all transactions (for example,
# re-INVITEs from public to private UA are hard to identify as
# NATed at the moment of request processing); look at replies
t_on_reply("1");

# send it out now; use stateful forwarding as it works reliably
# even for UDP2TCP
if (!t_relay()) {
sl_reply_error();
};
}

# !! Nathelper
onreply_route[1] {
    # NATed transaction ?
    if (isflagset(6) && status =~ "(183)|2[0-9][0-9]") {
        fix_nated_contact();
force_rtp_proxy();
    # otherwise, is it a transaction behind a NAT and we did not
    # know at time of request processing ? (RFC1918 contacts)
    } else if (nat_uac_test("1")) {
        fix_nated_contact();
    };
}

harry gaillac <gaillacharry@yahoo.fr> 說：

hello,

rtpproxy is not documented unless you look at sources

it's a good idea but onsip.org need some fixings too
many people waste time to ask for the same problems on
mailing list.

documentation is not updated or missing.
you can reply me: "do you want to write how-to ?"

onsip.org help me however i spent time (not waste
time) to understand why i could not call others
domains or get rtp streams with proxy rtp.

Regards

Harry

--- "Greger V. Teigre" a 嶰rit :

> I have registered the following issue with a
> suggestion for README text:
> http://bugs.sip-router.org/browse/SER-45
>
> I encourage everybody to register documentation
> needs!!
> g-)
>
> harry gaillac wrote:
> > look at rtpp_defines.h
> > re-compile rtpproxy.
> > put a rtpproxy script in /etc/rc.d/init.d redhat
> > you must add option in this script if ser run on
> the
> > same box.
> > So look at your ser.cfg script if you want call
> others
> > domains or your own domain
> >
> > Harry
> >
> >
> > --- Freeman a 嶰rit :
> >
> >> How can i get more information about config port
> >> range of rtpproxy,
> >> because not found in onsip.org !
> >>
> >> Tks a Lot !
> >> Freeman
> >>
> >>
> >> harry gaillac 說：Hello,
> >>
> >> If ser and rtpproxy run on the same box your
> ser.cfg
> >> is wrong.
> >>
> >> you need to define rtp range ports when you
> compile
> >> rtpproxy according to the rules of you fiwerall
> >>
> >> Look at onsip.org for help !
> >>
> >> Harry
> >> --- Freeman a 嶰rit :
> >>
> >>> Hi,
> >>>
> >>> I installed "Ser-0.8.14" + "nathelper" +
> >>> "rtpproxy" in RedHat 9.0, and add "./rtpproxy"
> in
> >>> startup script, when i tried both sipsoftphone
> in
> >>> the internet behind NAT that can connect but "no
> >>> voice" and auto hang-up, but when both
> >> sipsoftphone
> >>> in local network that no problem !
> >>>
> >>> Which port range i need release for rtpproxy in
> >> the
> >>> firewall ?
> >>>
> >>> my ser.cfg config as below :
> >>>
> >>> # ----------- global configuration parameters
> >>> ------------------------
> >>> #debug=3 # debug level (cmd line:
> >>> -dddddddddd)
> >>> #fork=yes
> >>> #log_stderror=no # (cmd line: -E)
> >>> /* Uncomment these lines to enter debugging mode
> >>> fork=no
> >>> */
> >>> #log_stderror=yes
> >>> #debug=4
> >>> check_via=no # (cmd. line: -v)
> >>> dns=no # (cmd. line: -r)
> >>> rev_dns=no # (cmd. line: -R)
> >>> #port=5060
> >>> #children=4
> >>> fifo="/tmp/ser_fifo"
> >>> # ------------------ module loading
> >>> ----------------------------------
> >>>
> >>> loadmodule "/usr/local/lib/ser/modules/sl.so"
> >>> loadmodule "/usr/local/lib/ser/modules/tm.so"
> >>> loadmodule "/usr/local/lib/ser/modules/rr.so"
> >>> loadmodule
> "/usr/local/lib/ser/modules/maxfwd.so"
> >>> loadmodule
> "/usr/local/lib/ser/modules/usrloc.so"
> >>> loadmodule
> >> "/usr/local/lib/ser/modules/registrar.so"
> >>> loadmodule
> "/usr/local/lib/ser/modules/textops.so"
> >>> loadmodule
> >> "/usr/local/lib/ser/modules/nathelper.so"
> >>> # Uncomment this if you want digest
> authentication
> >>> # mysql.so must be loaded !
> >>> #loadmodule
> "/usr/local/lib/ser/modules/dbtext.so"
> >>> #loadmodule "/usr/local/lib/ser/modules/auth.so"
> >>> #loadmodule
> >> "/usr/local/lib/ser/modules/auth_db.so"
> >>> #loadmodule
> "/usr/local/lib/ser/modules/mysql.so"
> >>> # ----------------- setting module-specific
> >>> parameters ---------------
> >>> # -- usrloc params --
> >>> modparam("usrloc", "db_mode", 0)
> >>> #modparam("auth_db", "db_url", "db:/var/dbtext")
> >>> #modparam("auth_db", "user_column", "user")
> >>> #modparam("auth_db", "domain_column", "domain")
> >>> #modparam("auth_db", "password_column",
> >> "password")
> >>> #modparam("auth_db", "calculate_ha1", 1)
> >>> #modparam("auth_db", "password_column_2",
> "ha1_2")
> >>> modparam("registrar", "nat_flag", 6)
> >>> modparam("nathelper", "natping_interval", 30) #
> >> Ping
> >>> interval 30 s
> >>> modparam("nathelper", "ping_nated_only", 1) #
> Ping
> >>> only clients behind NAT
> >>> modparam("nathelper",
> >>> "rtpproxy_sock","/var/run/rtpproxy.sock")
> >>> # -- auth params --
> >>> # Uncomment if you are using auth module
> >>> #
> >>> #modparam("auth_db", "calculate_ha1", yes)
> >>> #
> >>> # If you set "calculate_ha1" parameter to yes
> >> (which
> >>> true in this config),
> >>> # uncomment also the following parameter)
> >>> #
> >>> #modparam("auth_db", "password_column",
> >> "password")
> >>> # -- rr params --
> >>> # add value to ;lr param to make some broken UAs
> >>> happy
> >>> modparam("rr", "enable_full_lr", 1)
> >>> # ------------------------- request routing
> logic
> >>> -------------------
> >>> # main routing logic
> >>> #define NAT_UAC_TEST_C_1918 0x01
> >>> /*
> >>> * test for occurences of RFC1918 addresses in
> >>> Contact
> >>> * header field
> >>> */
> >>> #define NAT_UAC_TEST_RCVD 0x02
> >>> /*
> >>> * test if source address of signaling is
> different
> >>> from
> >>> * address advertised in Via
> >>> */
> >>> #define NAT_UAC_TEST_V_1918 0x04
> >>> /*
> >>> * test for occurences of RFC1918 addresses in
> SDP
> >>> body
> >>> */
> >>> #define NAT_UAC_TEST_S_1918 0x08
> >>> /*
> >>> * test for occurences of RFC1918 addresses top
> Via
> >>> */
> >>> route{
> >>> # initial sanity checks -- messages with
> >>> # max_forwards==0, or excessively long requests
> >>> if (!mf_process_maxfwd_header("10")) {
> >>> sl_send_reply("483","Too Many Hops");
> >>> break;
> >>> };
> >>> if (msg:len >= max_len ) {
> >>> sl_send_reply("513", "Message too big");
> >>> break;
> >>> };
> >>> if (nat_uac_test("3")) {
> >>> append_hf("Alex-hint: NAThelper\r\n");
> >>> fix_nated_contact(); # Rewrite contact with
> source
> >>> IP of signalling
> >>> if (method == "REGISTER" || !
> >>> search("^Record-Route:")) {
> >>> #if (www_authorize("iptel.org", "subscriber")) {
> >>> # www_challenge("iptel.org", "1");
> >>> # };
> >>> if (method == "INVITE") {
> >>> append_hf("Alex-hint: SDP rewritten\r\n");
> >>> fix_nated_sdp("3"); # Add direction=active to
> SDP
> >>> };
> >>> log("LOG: Someone trying to register from
> private
>
=== message truncated ===

___________________________________________________________________________
Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger
T幨嶰hargez cette version sur http://fr.messenger.yahoo.com

_______________________________________________
Serusers mailing list
serusers@lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers

有即時通知，收艂