22 May
2013
22 May
'13
4:49 p.m.
Thank you Klaus, good idea, but I forgot to mention that when I configure the client w/o
TLS using regular SIP/UDP/5060 I dont have that problem. When the BYE from the called side
comes it is sent to the calling side without any problems.
But I do see that the Contact and VIA reach the Proxy with Public IP:Ports (our NAT
automatically changes the internal IP/ports by the Public ones really well). The IP:Port
in the VIA, CONTACT are the same that the request brings at layer3 and 4 as well. So I
don't bother doing the extra NAT configuration in the office.
Maybe since the actual content of the TLS SIP call is encrypted the firewall does not
change the and then they should reach the proxy with the private IP:Ports, causing this
problem.
I will try TCP and also adding some extra NAT handling configuration to the proxy.
thank you again
----------------------------------------
Date: Wed, 22 May 2013 10:14:15 +0200
From: klaus.mailinglists(a)pernau.at
To: sr-users(a)lists.sip-router.org
CC: fborot(a)hotmail.com
Subject: Re: [SR-Users] TLS and SIP
On 21.05.2013 21:54, Fabian Borot wrote:
Hi
I am using Kamailio 4.0.1 in front of an asterisk servers farm to handle TLS with our
clients and providers. The idea is to have kamailio "talking" SIP/UDP/5060 and
TLS/TCP/5061 with the customers and providers and regular SIP/UDP/5060 with our internal
asterisk servers.
So far at least for the customers it looks like it can work. But I have a problem, when
the call is established and the called person hangs up, the BYE from the called person to
the calling person is ignored. Only when the calling person hangs up first the call is
terminated properly.
This is what I have been able to see:
1- Customer starts the TLS handshake/connection.
2- Kamailio authenticate it, then routes the call to the asterisk server using regular
SIP/UDP/5060 but I see that it is inserting 2 Record Routes in the INVITE:
Record-Route: <sip:192.168.1.58;r2=on;lr=on>
Record-Route: <sip:192.168.1.58:5061;transport=tls;r2=on;lr=on>
3- The Contact on that INVITE to the asterisk also comes like this:
Contact: <sip:94167032@172.31.196.21:53325;transport=tls>
Next time please show the whole message (without SDP) as Via would be
interesting too.
4- The ACK sent to the asterisk once it accepts the call (200 OK) also has those 2
Record-Routes:
Record-Route: <sip:192.168.1.58;r2=on;lr=on>
Record-Route: <sip:192.168.1.58:5061;transport=tls;r2=on;lr=on>
5- The call is established, once the called person decides to hang up the BYE looks like
this:
BYE sip:94167032@172.31.196.21:53325;transport=tls SIP/2.0
Via: SIP/2.0/UDP 192.168.1.59:5060;branch=z9hG4bK40fa1c23;rport
Route:
<sip:192.168.1.58;r2=on;lr=on>,<sip:192.168.1.58:5061;transport=tls;r2=on;lr=on>
Max-Forwards: 70
From: <sip:3030500@1.2.3.4>;tag=as37953869
To: "kamailio"
<sip:kamailio@1.2.3.4>;tag=788cd7c892df40f3b1967112395e2ca4
Call-ID: f9fe65daf1074219be26cb0c224339f1
CSeq: 102 BYE
User-Agent: Asterisk PBX 11.3.0
X-Asterisk-HangupCause: Normal Clearing
X-Asterisk-HangupCauseCode: 16
Content-Length: 0
My kamailio TLS config is shown below:
enable_tls=yes
loadmodule "tls.so"
# ----- tls params -----
modparam("tls", "config",
"/usr/local/kamailio-4.1//etc/kamailio/tls.cfg")
modparam("tls", "private_key", "./privkey.pem")
modparam("tls", "certificate", "./kamailio1_cert.pem")
modparam("tls", "ca_list", "./calist.pem")
modparam("tls", "verify_certificate", 1)
modparam("tls", "require_certificate", 1)
The TLS client that I am using is called Blink.At this point I don't know whether
kamailio is sending the BYE using TLS to the customer and waiting for the 200 OK from the
customer or whether kamailio does not like something in the BYE and that is why is
ignoring it.
I see some encrypted packets from kamailio to the client but I don't know what is
inside.
Any help would be very appreciated.
I guess this is a NAT problem (or similar) and the proxy is not able to
signal requests back to the client. When the client sends the INVITE,
the client opens a TLS connection (or uses the one which was established
during REGISTER). This existing TLS connection must be used by the proxy
to send requests to the client. Therefore you have to use NAT traversal
methodes, eg. add_contact_alias() or the new outbound stuff.
Anyway - first disable TLS und try TCP. TCP has the exact same problems
but is much easier to debug. Only if TCP work fine, then try to use TLS.
regards
Klaus