Re: [OpenSER-Users] Issue calling use_media_proxy() at on_reply_route.

Hi Sergio, I share the same opinion with Andreas that your openser configuration is not properly done and you are not handling properly in normal route the requests for mediaproxy. Please keep in mind if you are using some sample configurations for mediaproxy written for earlier versions - since 1.2 the policy for nat detection for registers (so destinations behind nat) has been changed and now u must use bflag instead of normal ones. Here is some sample config to give you some ideas about what u could do: route { if (!search("^Contact:[ ]*\*") && nat_uac_test("23")) { append_hf("P-hint: Cannot find contact and client is behind nat\r\n"); setbflag(6); fix_nated_register(); force_rport(); }; t_on_reply("1"); if (isbflagset(6) || isbflagset(7)) { if(!isbflagset(8)) { # Set flag 8 for using mediaproxy in onreply for the same sessions setbflag(8); use_media_proxy(); }; } onreply_route[1] { if (status=~"(180)|(183)|2[0-9][0-9]") { if (isbflagset(8) && !search("^Content-Length:[ ]*0")) { append_hf("P-hint: ONREPLY: Content in, use media proxy\r\n"); use_media_proxy(); }; if(client_nat_test("1")) { fix_contact(); if (status=~"(183)|(200)") { fix_nated_sdp("1"); }; }; }; append_hf("P-hint: ONREPLY END. \r\n"); } Hope this helps. DanB On 8/8/07, Andreas Granig <agranig(a)sipwise.com> wrote: