Hello,

Thanks Daniel, knowing how I should specify all the parameters would be great, just a syntax example, in particular when defining all the sip headers and why their are double quotes/single quotes or what best method is.

Thanks again and sorry for the noise!

Jon

something seems to be strange with interpreting the parameters from command line and forwarding them to kamailio. I will dig a bit into kamctl and come back with some hints.

Cheers,
Daniel

On 21/11/16 13:19, Jonathan Hunter wrote:

Hello.

This is running from command line, not withing the configuration file, so I am testing before I try to add it in.

I have tried with single quotes, but not sure how to enclose the SIP headers and the r/n , can you please advise?

kamctl mi t_uac_dlg INFO sip:3003@193.144.1.112 . udp:10.70.1.136:5060 \"From:sip:1234@8.8.8.8"\r\nTo:sip:3003@193.144.1.112\r\nContact:sip:daemon@8.8.8.8\r\n\""

As I have tried;

kamctl mi t_uac_dlg 'INFO' 'sip:3003@193.144.1.112' '.' 'udp:10.70.1.136:5060' 'From:sip:1234@8.8.8.8'r\n'To:sip:3003@193.144.1.112'\r\n'Contact:sip:daemon@8.8.8.8'\r\n\'

And still get invalid socket, as it is including all the SIP headers in with the port parameter so I presume I am missing an operator?

/usr/sbin/kamailio[28999]: ERROR: <core> [main.c:1128]: parse_phostport(): too many colons in udp:10.70.1.136:5060From:sip:1234@8.8.8.8rnTo:sip:3003@193.144.1.112rnContact:sip:daemon@8.8.8.8rn'

Its including them all as the local socket/port.

Thanks

Jon

From: Daniel-Constantin Mierla <miconda@gmail.com>
Sent: 21 November 2016 11:29
To: Jonathan Hunter; Kamailio SER - Users Mailing List
Subject: Re: [SR-Users] Send SIP Info within a dialog using $uac_req(method)="INFO"

Hello,

On 20/11/16 16:12, Jonathan Hunter wrote:

Hello,

Ok great thanks Daniel.

One final thing, I cant seem to get kamilio to except the parameter when I add the socket parameter in the kamctl mi t_uac_dlg command.

If I add as below I get 404 invalid local socket;

kamctl mi t_uac_dlg INFO sip:3003@193.144.1.112 . udp:10.70.1.136:5060 \"From:sip:1234@8.8.8.8"\r\nTo:sip:3003@193.144.1.112\r\nContact:sip:daemon@8.8.8.8\r\n\""

do you run this command from command line or from kamailio.cfg? I think it's good to be sure it works from command line.

Also, can you try to enclose each parameter in single quotes -- then it's easier for the command line parser to identify the parameters.

Cheers,
Daniel

404 Invalid local socket

As its picking up the socket with the from address included as well, is this again around syntax?

ERROR: <core> [main.c:1128]: parse_phostport(): too many colons in udp:10.70.1.136:5060"From:sip:1234@8.8.8.8

As it seems to pick socket up ok;

Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: DEBUG: mi_fifo [mi_parser.c:245]: mi_parse_tree(): adding node <> ; val <INFO>

Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: DEBUG: mi_fifo [mi_parser.c:245]: mi_parse_tree(): adding node <> ; val <sip:3003@193.144.1.112>

Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: DEBUG: mi_fifo [mi_parser.c:245]: mi_parse_tree(): adding node <> ; val <.>

Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: DEBUG: mi_fifo [mi_parser.c:245]: mi_parse_tree(): adding node <> ; val <udp:10.70.1.136:5060>

Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: DEBUG: mi_fifo [mi_parser.c:245]: mi_parse_tree(): adding node <> ; val <From:sip:1234@8.8.8.8

Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: DEBUG: mi_fifo [mi_parser.c:84]: mi_parse_node(): end of fifo input tree

Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: DEBUG: mi_fifo [fifo_fnc.c:507]: mi_fifo_server(): done parsing the mi tree

Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: ERROR: <core> [main.c:1128]: parse_phostport(): too many colons in udp:10.70.1.136:5060"From:sip:1234@8.8.8.8

-- 
Daniel-Constantin Mierla
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 28-30, 2016 - http://www.asipto.com