14 Apr
2022
14 Apr
'22
12:19 p.m.
Hello,
please have a look to the docs, its all there.
* reg_timer_interval parameter
* section about database registration
Cheers,
Henning
--
Henning Westerholt - https://skalatan.de/blog/
Kamailio services - https://gilawa.com<https://gilawa.com/>
From: Ahmed Fouad <afouad(a)gmail.com>
Sent: Thursday, April 14, 2022 10:54 AM
To: Henning Westerholt <hw(a)gilawa.com>
Cc: Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>
Subject: Re: [SR-Users] UAC parameter for enabling and disabling remote registration
Thanks and how can I control that timer after enabling the contact ?
Regarding the dbase flag I don't see the current values saved there , it's only
shown when dumping.
________________________________
From: Henning Westerholt <hw@gilawa.com<mailto:hw@gilawa.com>>
Sent: Thursday, April 14, 2022 10:50:15 AM
To: Ahmed Fouad <afouad@gmail.com<mailto:afouad@gmail.com>>
Cc: Kamailio (SER) - Users Mailing List
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Subject: RE: [SR-Users] UAC parameter for enabling and disabling remote registration
Hello,
if you do the reg enable and it shows also enabled in the flags, there should be (maybe
after a timer run period) a new REGISTER send out.
Regarding your request, I would try to add the DB records with "disabled" flag
in the database, and then using the uac_reg_enable/_disable function in the cfg file.
Cheers,
Henning
--
Henning Westerholt - https://skalatan.de/blog/
Kamailio services - https://gilawa.com<https://gilawa.com/>
From: Ahmed Fouad <afouad@gmail.com<mailto:afouad@gmail.com>>
Sent: Wednesday, April 13, 2022 9:15 PM
To: Henning Westerholt <hw@gilawa.com<mailto:hw@gilawa.com>>
Cc: Kamailio (SER) - Users Mailing List
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Subject: Re: [SR-Users] UAC parameter for enabling and disabling remote registration
Hi,
I did many tests with some combinations and I'm afraid I've a problem here with
registration after being disabled
1 - Having modparam("uac", "reg_active", 0)
Completely disable the remote registration and can't be overridden any other options
trying to enable single registration from the code or from kamcmd.
2 - Having modparam("uac", "reg_active", 1)
Remote registration is automatic and sent when kamailio is restarted and all expiration is
being handled perfectly.
thus dumping reg_dump the flags = 20 ( 16 (2^4) - registration initialized + 4 (2^2) -
registration succeeded )
I tried to disable this registration using kamcmd uac.reg_disable l_username XXXXX and
it's disabled and confirmed flags: 21 (+ 1 (2^0) - registration profile is disabled
))
but my problem here I didn't see unregister going with expiration = 0 to clear the
registration from the remote pbx so I used kamcmd uac.reg_unregister l_username XXXXX and
message went fine and extension was unregistered.
tried again to enable it back using kamcmd uac.reg_enable l_username XXXXXX I see the
flags goes to 16 only and no register message is being sent and it's stale like this
even by running kamcmd uac.reg_reload
My request is simply I've some entries in the uacreg table. I'd like to start
kamailio without remote registration being enabled and have the ability to enable/disable
the REGISTER messages from the configuration file.
Can you please advise how to accomplish such scenario ?
On Wed, Apr 13, 2022 at 11:03 AM Henning Westerholt
<hw@gilawa.com<mailto:hw@gilawa.com>> wrote:
Hello,
don't know without looking to the code, I'd say just give it a try and see if it
works.
Cheers,
Henning
--
Henning Westerholt - https://skalatan.de/blog/
Kamailio services - https://gilawa.com<https://gilawa.com/>
From: Ahmed Fouad <afouad@gmail.com<mailto:afouad@gmail.com>>
Sent: Wednesday, April 13, 2022 4:42 PM
To: Henning Westerholt <hw@gilawa.com<mailto:hw@gilawa.com>>
Cc: Kamailio (SER) - Users Mailing List
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Subject: Re: [SR-Users] UAC parameter for enabling and disabling remote registration
Hi,
I've tested this parameter and it's working as expected but I've a question
here. When I start kamailio with disabled remote registration mode then from the
configuration I use uac_reg_request_to(user, mode) to register only a single extension.
Will this scenario work ?
or the whole remote registration is disabled and needs to be enabled first ?
My goal is to send single registrations only from the code logic, not when kamailio
starts.
On Wed, Apr 13, 2022 at 10:16 AM Henning Westerholt
<hw@gilawa.com<mailto:hw@gilawa.com>> wrote:
Hello,
it is present e.g. in 5.5.x, also available in docs:
https://kamailio.org/docs/modules/5.5.x/modules/uac.html#uac.p.reg_active
Why do you think it was not merged?
Cheers,
Henning
--
Henning Westerholt - https://skalatan.de/blog/
Kamailio services - https://gilawa.com<https://gilawa.com/>
From: sr-users
<sr-users-bounces@lists.kamailio.org<mailto:sr-users-bounces@lists.kamailio.org>>
On Behalf Of Ahmed Fouad
Sent: Wednesday, April 13, 2022 4:11 PM
To: Kamailio (SER) - Users Mailing List
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Subject: [SR-Users] UAC parameter for enabling and disabling remote registration
Hi,
I was wondering if this patch was ever merged to the current release(s)
https://github.com/kamailio/kamailio/commit/49f354276df3cfc2cdb0f85b5a1839f…
I'd like to start Kamailio with all remote registration disabled then enable based on
the code logic
Thanks in advance,
--
Best Regards,
Ahmed Fouad
--
Best Regards,
Ahmed Fouad