Douglas Garstang wrote:
All,
I'm trying to get SRV lookups to work with OpenSER 1.0.0. I've
exhausted every avenue of documentation including newsgroups, various
forums etc.
Using t_relay, OpenSER seems to be performing the correct DNS SRV
queries and obtaining a list of hosts to try. Below are the relevant
sections of my DNS zone file. We're talking UDP, and based on the
priority and weights below, OpenSER should be basically doing a
round-robin approach, and it seems to be.
The problem occurs when one of the hosts is not contactable. OpenSER
simply stops and does not try the next host in it's list. I would
have thought that for OpenSER to fully support SRV lookups, it should
try each until it is successful. After all, that's a large part of
the whole point of SRV records.
(open)ser does not support SRV failover. It just looks for
_sip._protocol and uses the first found record. No failover if there is
a problem with the destination.
Does the t_relay() function have logic within itself
to keep trying
hosts until it gets a connection? What would be the definition a
no
failure that would make it move onto the next host be
anyway? Network
failure certainly, but would a 'Not found' be considered a failure
that would cause it to move on? Would anything other than an ACK be a
failure?
If you receive a SIP response, than there is no transport failure -> no
failover to other SRV hosts.
Is there some variable I can set or some function I
can call that
causes t_relay() to retry all hosts in it's SRV list? Without this
feature, OpenSER's usefulness is very limited.
no :-(
klaus
Help very much appreciated. Doug
bil-pdev-3 IN A 192.168.10.4
proxy1 IN CNAME bil-pdev-3
proxy2 IN CNAME bil-pdev-3
proxy.bil.voip.com. IN NAPTR 50 50 "s"
"SIPS+D2T" ""
_sips._tcp.proxy.bil.voip.com.
proxy.bil.voip.com.
IN NAPTR 60 60 "s" "SIP+D2U" ""
_sip._udp.proxy.bil.voip.com.
proxy.bil.voip.com. IN NAPTR 70 40 "s"
"SIP+D2T" ""
_sip._tcp.proxy.bil.voip.com.
_sips._tcp.proxy.bil.voip.com. IN SRV 100 10 5061
proxy1.proxy.bil.voip.com.
_sips._tcp.proxy.bil.voip.com. IN
SRV 100 10 5061
proxy2.proxy.bil.voip.com.
_sip._udp.proxy.bil.voip.com. IN SRV 100 10 5060
proxy1.proxy.bil.voip.com. ; This line and the next are SRV records
being looked up
_sip._udp.proxy.bil.voip.com. IN SRV
100 10 5060
proxy2.proxy.bil.voip.com. ;
_sip._tcp.proxy.bil.voip.com. IN SRV 100 10 5060
proxy1.proxy.bil.voip.com.
_sip._tcp.proxy.bil.voip.com. IN
SRV 100 10 5060
proxy2.proxy.bil.voip.com.
*._tcp IN SRV 0 0 0
. *._udp IN SRV 0 0
0 . ;
_______________________________________________ Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users