14 Oct
2008
14 Oct
'08
5:54 p.m.
Hi Again...
It seems that problem 1 is solved... i only have to change the
configuration in clients and servers configs file from freeradius and
radius-client to point to my gateway ip-address not to my loopbak
interface...
But for problem two... any advice?...
raul2r2 wrote:
Hi Dan...
Well, it seems that i can solve the problem... the problem was that
i don't recompile correctly rlm_python module support. Thank you, i see a
similar answer from you in the same thread... Although my other problem
persists...
1. How can i change/define NAS-IP-Addrees parameter from openser... it
takes loopback interface, and i need that this must be gateway public ip,
that i use in my rates for cdrtool to calculate correctly MaxSessionTime.
2. I'm trying to hangup the call... I use a little server script that use
end_dlg_end MI function to fake bye's in both directions ending media
session. Problems is that openser script does not process these bye's so i
can not stop accounting. I know that this is an opensips limitation and
saw a discursion this October where opensips Bogdan developer admit that
he is working on some kind of solution.... Meanwhile i am looking for
alternativies... these are the two i have:
1. Use mediaproxy and engage_media_proxy to end media session when dialog
expires (probably playing with timeout_avp dialog function and your
script)... but i'm not sure that this can solve the accounting problem.
2. I read a bit about you are using SIP Session Timers and Yate to solve
this... can you help me a bit in the right direction or configuration
scripts...
Thank you in advance...
Cheers
DanB-2 wrote:
--
View this message in context:
http://www.nabble.com/Send-MaxCallDuration-and-UserCredit-for-freeradius-cd…
Sent from the OpenSER Users Mailing List mailing list archive at Nabble.com.
Raul,
this log shows only half of the call(stop one).
Can u show a full trace (start and stop of the call)?
Cheers,
DanB
On Thu, Oct 9, 2008 at 12:40 PM, raul2r2 <raul2r2(a)gmail.com> wrote:
Hi Dan...:
The syslog show this:
Oct 9 14:40:01 PREPSQL01 cdrtool[27237]: Normalize datasource
ser_radius,
database DB_radius, table radacct200810
Oct 9 14:40:01 PREPSQL01 cdrtool[27237]: Normalize lock id 5889 aquired
for
ser_radius:radacct200810
Oct 9 14:40:01 PREPSQL01 cdrtool[27237]: Normalize datasource
ser_radius,
database DB_radius, table radacct200809
Oct 9 14:40:01 PREPSQL01 cdrtool[27237]: Normalize lock id 5889 aquired
for
ser_radius:radacct200809
Oct 9 14:40:01 PREPSQL01 cdrtool[27237]: Database error: Table
'radius.radacct200809' doesn't exist (1146)
Oct 9 14:40:01 PREPSQL01 cdrtool[27237]: Unlock
ser_radius:radacct200810
Oct 9 14:40:01 PREPSQL01 cdrtool[27237]: Unlock
ser_radius:radacct200809
Oct 9 14:40:02 PREPSQL01 cdrtool[27236]: Checking user quotas for data
source OpenSER
Oct 9 14:40:02 PREPSQL01 cdrtool[27236]: Using database queries to
block
accounts
Oct 9 14:40:02 PREPSQL01 cdrtool[27236]: No quota has been exceeded
Oct 9 14:40:14 PREPSQL01 cdrtool[7803]: DebitBalance
CallId=1A0082B8-7734-BA31-4828-3D24892A184C(a)192.168.0.41
From=admin(a)goldslam.com To=sip:0034678650039@192.168.0.130:5060
Gateway=127.0.0.1 Duration=8
Oct 9 14:40:14 PREPSQL01 cdrtool[7803]: Error: session
1A0082B8-7734-BA31-4828-3D24892A184C(a)192.168.0.41 for admin(a)goldslam.com
does not exist
I don't know if the bad gateway could be the cause of this... How i can
change NAS-IP-Address in openser?
Cheers...
DanB-2 wrote:
_______________________________________________
Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
Raul,
it looks like there is something wrong with the answer you receive
from
cdrtool (could be wrong handled by connector
too...).
Can u post me the cdrtool syslog? There it should be seen the answer
received.
Cheers,
DanB
On Tue, Oct 7, 2008 at 7:27 PM, raul2r2 <raul2r2(a)gmail.com> wrote:
>
> Hi DanB...
> Finally i have to set up manually, nothing different from README
> configuration and from my older platform running previous version of
> freeradius-cdrtool (1.1)... It's doesn't matter, setting up manually
is
> enough for me... Thank you.
> I have other stupid problem... first one is extracting gateway ip
in
> authorization section of the script. I see it
is extracted from
> NAS-IP-Address... this contain the loopbak ip 127.0.0.1... how i can
> change
> this parameter in openser to send my real gateway ip?
> The second one isn't so easy and it's possible that have some kind
of
> relation with the previous one. When the
script tries to do and
> endsession
> over cdrtool (6.6.9) rating engine, it raises the following
exception:
> rlm_python [freeradius-cdrtool]:
DebitBalance
> CallId=27874A50-6363-3C25-6B88-6FBCB76686C6(a)192.168.0.41
> From=admin(a)goldslam.com To=sip:0034XXXXXXXXX@192.168.0.130:5060
> Gateway=127.0.0.1 Duration=9
> rlm_python:EXCEPT:exceptions.AttributeError: 'NoneType' object has no
> attribute 'find'
> I'll try to investigate a bit more why this is happening...
> Cheers.
>
>
>
>
_______________________________________________
Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
--
View this message in context:
http://www.nabble.com/Send-MaxCallDuration-and-UserCredit-for-freeradius-cd…
Sent from the OpenSER Users Mailing List mailing list archive at
Nabble.com.
_______________________________________________
Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users