Re: [Serusers] SER log

Hi Emil, Thanks for your infor. I tried and it still didn't work. Now I doubt if the /etc/ser/ser.cfg (see the following) takes effect or not. I changed the settings and if I ran the server by command ' # ser ', no problem. But if I ran it like ' # ser -f ser.cfg ', then it told me ERROR: bad config file (11 errors) Actually I didn't change too much on the default ser.cfg. Pls indicate. _________________________________________________________________________________ # # $Id: ser.cfg,v 1.12 2002/10/21 02:40:06 jiri Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=9 # debug level (cmd line: -dddddddddd) fork=no log_stderror=no # (cmd line: -E) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database #loadmodule "//usr/lib/ser/modules/mysql.so" loadmodule "//usr/lib/ser/modules/sl.so" loadmodule "//usr/lib/ser/modules/tm.so" loadmodule "//usr/lib/ser/modules/rr.so" loadmodule "//usr/lib/ser/modules/maxfwd.so" loadmodule "//usr/lib/ser/modules/usrloc.so" loadmodule "//usr/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! #loadmodule "//usr/lib/ser/modules/auth.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth", "secret", "alsdkhglaksdhfkloiwr") #modparam("auth", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth", "password_column", "password") # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwars==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; }; # Do strict routing if pre-loaded route headers present rewriteFromRoute(); # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==sip.mycompany.com) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication # if (!www_authorize("iptel.org", "subscriber")) { # www_challenge("iptel.org", "0"); # break; # }; save("location"); break; }; # attempt handoff to PSTN if (uri=~"^sip:[0-9]*@sip.mycompany.com") { log(4, "Forwarding to PSTN\n"); forward(X.X.X.X,5060); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now if (!t_relay()) { sl_reply_error(); }; } _____________________________________________________________________________ ----- Original Message ----- From: Emil To: Bo Sent: Friday, March 14, 2003 5:43 PM Subject: Re: [Serusers] SER log Hi Bo, Jan just helped me with a similar problem. Debug level = 9 and fork t= no. Tail /var/log messages and you will get plenty of info. Emil ----- Original Message ----- From: Bo To: serusers(a)lists.iptel.org Sent: Saturday, March 15, 2003 12:35 AM Subject: [Serusers] SER log Hi, Does anyone have any clue on the following problem? I recompiled and installed SER in Redhat Linux 8.0. Unfortunately I tried all the possible options (debug level) in the ser.cfg, but the only messages I could see in the /var/log/messsages are as follows. Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is initially 65535 Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is finally 262142 Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is initially 65535 Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is finally 262142 Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is initially 65535 Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is finally 262142 Mar 14 17:56:49 dda ser[15316]: INFO: fifo process starting: 15316 Mar 14 17:56:49 dda ser[15316]: SER: open_uac_fifo: fifo server up at /tmp/ser_fifo... What should I do to see the detailed debugs? Thanks, Bo