Re: [OpenSER-Users] Only a single phone will register

Hello All, I setup my Openser 1.3 and mysql. Authentication seems to work for only the first phone that registers. I did a tcpdump from the server and the rest of the phones get a 401 unauthorized. I can go into mysql and actually see the correct username password in the database. I also double checked it on the phones. Like I said... all three of the phones will register but only if they are the first. Is it something obvious that I'm missing? Anyone else run into this? If I do a "openserctl ul show" (with debug on) I get the following output.... database engine 'MYSQL' loaded Control engine 'FIFO' loaded entering fifo_cmd ul_dump Domain:: location table=512 records=1 max_slot=1 AOR:: 1024 Contact:: sip:1024@172.17.5.118:5060 <http://sip:1024@172.17.5.118:5060> Q= Expires:: 2657 Callid:: d35614ae-9db18357-7bd13fe4(a)172.17.5.118 <mailto:d35614ae-9db18357-7bd13fe4@172.17.5.118> Cseq:: 2 User-agent:: PolycomSoundPointIP-SPIP_550-UA/3.0.0.0258 State:: CS_NEW Flags:: 0 Cflag:: 0 Socket:: udp:198.236.66.129:5060 <http://198.236.66.129:5060> Methods:: 8063 FIFO command was: :ul_dump:openser_receiver_22488 Is the "max_sot=1" a concern? If so I am at a loss for where to change it. Thanks for any help, Dave -- David Poirier ------------------------------------------------------------------------ _______________________________________________ Users mailing list Users(a)lists.openser.org http://lists.openser.org/cgi-bin/mailman/listinfo/users