16 Oct
2007
16 Oct
'07
5:40 a.m.
Hi there!
I'm using ser0.9.6 to do the call transfer, which part of the configuration
that I need to configure in ser.cfg? Do I need to create a new route?
Thanks.
Cheers,
Roa Yu :)
-----Original Message-----
From: serusers-bounces(a)lists.iptel.org
[mailto:serusers-bounces@lists.iptel.org] On Behalf Of roayu
Sent: Friday, October 12, 2007 2:45 PM
To: kgfleischmann(a)t-online.de
Cc: serusers(a)lists.iptel.org
Subject: Re: [Serusers] SER + Linksys SPA942 + Call transfer
Hi Klaus!
The UA does not received the REFER sent by SPA942. What should I need to
configure to ensure that the UA receive the REFER from the transfer
agent(SPA942)?
Thanks.
Cheers,
Roa Yu
-----Original Message-----
From: serusers-bounces(a)lists.iptel.org
[mailto:serusers-bounces@lists.iptel.org] On Behalf Of
kgfleischmann(a)t-online.de
Sent: Friday, October 12, 2007 2:22 PM
To: serusers(a)lists.iptel.org
Subject: Re: [Serusers] SER + Linksys SPA942 + Call transfer
The NOTIFY is always sent from the UA, which received the REFER. SER
only relays it. Did you check this?
Cheers
Klaus
roayu wrote:
Hi there!
After SPA942(transfer agent) sent REFER to SER, SER does not send a NOTIFY
to SPA942(transfer agent). What's causes this? Can anyone tell me.
Thanks.
Cheers,
Roa Yu :)
-----Original Message-----
From: serusers-bounces(a)lists.iptel.org
[mailto:serusers-bounces@lists.iptel.org] On Behalf Of roayu
Sent: Thursday, October 11, 2007 4:34 PM
To: Atle Samuelsen
Cc: serusers(a)lists.iptel.org
Subject: Re: [Serusers] SER + Linksys SPA942 + Call transfer
Hi Atle,
Let me make my scenario clear on you.
I have 2 softphone and 1 IP phone(SPA942). I would like to call from
Softphone A to SPA942, then use SPA942 transfer the call to Softphone B.
But, when I do so, the connection still remained on between SPA942 and
Softphone B.
I managed to get Softphone A onHold and the SPA942 managed to call to
Softphone B. Once I press on the 'xfer' button after calling Softphone B,
A
still onHold and no SIP signal to unHold A and to
terminate B.
If I would like to configure the ser.cfg file, which part that I need to
configure? And how do I do that?
Thanks.
Cheers,
Roa Yu
-----Original Message-----
From: Atle Samuelsen [mailto:clona@cyberhouse.no]
Sent: Thursday, October 11, 2007 3:19 PM
To: roayu
Cc: serusers(a)lists.iptel.org
Subject: Re: [Serusers] SER + Linksys SPA942 + Call transfer
Hi Roa,i
* roayu <roayu(a)ctisys.net> [071011 04:01]:
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
Hi, there!
I have some questions and help.
1) I would like to know can call transfer being done when the
connection is P2P? When I tried to use relay (mediaproxy) to do the call
transfer, it's able to transfer the call to the other party whereas when
the
condition is P2P, it just can't pass the
correct signal.
I'm proberbly only tierd (9:15 am here) but P2P? Can you provide the
signalling and ser.cfg so we can understand what you are trying to
establish?
I personally think you are trying to do a call transfer from one ua to a
other, where the original call went true mediaproxy, but you do not want
the "new" transferd call to go true it.
2) Can SER support SPA942 ? Or is there some
other settings that I need
to configure on SER ?
SPA942, SPA962, SPA2102, yea.. all Linksys SPA products work like a
charm with SER (Who has a 942 as his primary phone these days)
Best Regards
ATle
Thanks.
Cheers,
Roa Yu
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers