20 Dec
2005
20 Dec
'05
7:22 a.m.
Hello,
Im making tests and its not a LCR problem, its a problem from my GW2,
when I use it for first option, it fails too, here you have the
ngrep,
ClientA --> Proxy -->
GW2
(192.168.10.93) (192.168.10.91)
(195.219.74.166)
Regards
The problem is that the BYE request will be handled by your LCR logic.
The BYE request should be route in the loose_route block as it is an
in-dialog request. Maybe the BYE sent from the gateway is not correct.
Please post a ngrep dump (ngrep -t -W byline port 5060)
regards
klaus
Pepe wrote:
Hello,
Im configuring Openser with LCR module and Im having an extrange
behavior, I have 2 gateways, GW1(preference1) and GW2(preference2),
GW1(pref.1)
/ \
ClientA --> OpenSer --> Client B
\ GW2 (pref.2) /
When I call from Client A to Client B using GW1, all works fine, its the
same when hang up Client B or Client A, but when GW1 fail(I provoke it
changing codec) and use failure route (GW 2) then if Client A hang up
all works fine, but the problem is when is Client B who hang up, its
like a new conversation, GW 2 send BYE to openser and Openser just send
"503 Service Not avilable - No gateways" to GW2, but doesnt send nothing
to ClientA, any idea ????
Thx in advance