Hi,
it might be a signalling problem. Most of the UA drops the calls if they do not get the ACK for 200 OK. check on the network if this is the case.
regards, bogdan
Hamid Ali Asgari wrote:
The calls are between two UAs. The problem is that with a certain type of UA (type A), the calls are ok if the calls are between two type A UAs and don't get disconnected. I can talk as long as I want.
But if I try calling from that UA (type A) to Windows messenger, the call gets disconnects after less than a minute. In the 1 minute I can talk (so I assume it's not a CODEC problem, correct me if I am wrong)
I have also tried with a UA and a Cisco gateway. On the Cisco debugs I see Disconnet cause code 102 (Session-End-Callback ) which I don't think would be the case. There is no callback config on the gateway or the UA.
I guess the UA is tearing down the call for some reasn I don't know.
Any clues? Hamid
-----Original Message----- From: users-bounces@openser.org [mailto:users-bounces@openser.org] On Behalf Of Mike Williams Sent: Wednesday, July 05, 2006 8:04 PM To: users@openser.org Subject: Re: [Users] Disconnect Cause on OpenSER
On Wednesday 05 July 2006 12:31, Hamid Ali Asgari wrote:
Are the calls from one UA to another, or from a UA to a gateway? I know for instance that Asterisk has problems with G729b silence detection and will drop calls because it thinks the call has dropped. Perhaps other equipment or carriers has this problem too.
---Mike
Hi,
I am having a problem with OpenSER and certain types of CPEs. The problem is that the calls get established and the parties can talk, however after
a
very short period the call gets disconnected. Any guidelines how I could troubleshoot this?
PS: Is there anyway to see the calls disconnect cause on OpenSER? I am currently running OpenSER with radius.
Thanks in advance,
Hamid
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users