Re: [Kamailio-Users] BYE message not relayed to caller

Hello, My setup includes a cellphone that uses Wi-Fi to hookup to the internet with IP 192.168.1.101. Cellphone app, tries to register with VOIPSwitch through an outbound proxy server(Kamailio + rtpproxy), which rewrites SDP to force rtp through an rtpproxy. I can make a call from the cellphone to a PSTN number. When the PSTN endpoint hangs up, VOIPSwitch relays a BYE message to the proxy that looks like : No. Time Source Destination Protocol Info 27 18.383929 IPaddr_VoipSwitch IPaddr_proxy SIP Request: BYE sip:1234@IPaddr_VoipSwitch Frame 27 (420 bytes on wire, 420 bytes captured) Ethernet II, Src: Unispher_40:b5:39 (00:90:1a:40:b5:39), Dst: Supermic_bd:b9:bc (00:30:48:bd:b9:bc) Internet Protocol, Src: IPaddr_VoipSwitch , Dst: IPaddr_proxy User Datagram Protocol, Src Port: sip (5060), Dst Port: 7160 (7160) Session Initiation Protocol Request-Line: BYE sip:1234@IPaddr_VoipSwitch SIP/2.0 Method: BYE [Resent Packet: False] Message Header Route: <sip:IPaddr_proxy:7160;lr=on;nat=yes> CSeq: 1 BYE Via: SIP/2.0/UDP IPaddr_VoipSwitch:5060; branch=z9hG4bk180242100434182912333954 From: sip:5678@IPaddr_VoipSwitch;tag=18024210041929123187506289 Call-ID: LUOyIDm-ecy36NcUfj5G3v1lM6g5snkM To: "1234" <sip:1234@IPaddr_VoipSwitch>;tag=9XHJmiuf58vTrF7.vwflEK-G63JVPQSi Content-Length: 0 The request URI in the above message is the IP address of VOIPSwitch itself, which causes the proxy to forward the BYE message back to VOIPSwitch. The cellphone never receives the BYE message and consequently never hangs up. Any suggestions on how i can get around this problem ? Thanks and Regards, Vikram. _______________________________________________ Kamailio (OpenSER) - Users mailing list Users(a)lists.kamailio.org http://lists.kamailio.org/cgi-bin/mailman/listinfo/users http://lists.openser-project.org/cgi-bin/mailman/listinfo/users