Fwd: RES: [Serusers] Cisco 3640 X SER X PSTN

Many thks Jose Ricardo and "Ser Users" thks for your attetion more one time Jose Ricardo i have other problems now ahahahahahahah my call hang up and dont voice works now the caller rings e accept but cisco send me byes i send ethereal log to you into anex my IP is SER 200.184.153.54 Cisco 200.184.152.129 and Phone Voip 200.184.153.52 thks a lot this message below is in Portuguese: Muito Obrigado Jose Ricardo Falew pela forca desculpe meu pessimo ingles ---------- Mensagem reenviada ---------- Subject: RES: [Serusers] Cisco 3640 X SER X PSTN Date: Qui 19 Mai 2005 13:04 From: Jose Ricardo Maia Moraes <jrm(a)uol.com.br> To: serusers(a)lists.iptel.org Hi, I use R2 Digital on all of my AS5300 connected to PABX Nortel, Lucent and some carriers. Look the sample of my config: controller E1 0 framing NO-CRC4 clock source line primary ds0-group 0 timeslots 1-15,17-31 type r2-digital r2-compelled ani cas-custom 0 country brazil metering category 2 answer-signal group-b 1 voice-port 0:0 compand-type a-law cptone BR dial-peer voice 10 pots destination-pattern xxx direct-inward-dial port 0:0 Good luck. -----Mensagem original----- De: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] Em nome de Welesley Sibelson Dias Enviada em: quinta-feira, 19 de maio de 2005 06:33 Para: serusers(a)lists.iptel.org Assunto: [Serusers] Cisco 3640 X SER X PSTN Hi All I have try connect one E1 using SER and CISCO 3640 but i have some problems my PSTN Carrier Need Number for "A" but i don't send this , i need to complete calls in my carrier. Please have someone using cisco in R2 Digital send my one example of cfg . thks a lot