20 May
2009
20 May
'09
1:17 p.m.
Hi,
Well it is almost working ;) thanks daniel.
The only problem is, i am using kamailio 1.5 and there are no :
location_internal and location_external tables in mysql.
So it is working from 192.168.0.0/24 to 10.10.10.0/24 network but not in the
other way..
I changed (location_internal and location_external) by location table in my
.cfg file. I guess it's the problem. Here are the call Flow and my .cfg
file.
http://www.nabble.com/file/p23632701/callOk.jpg
http://www.nabble.com/file/p23632701/callNoOk.jpg
And my .cfg file.
# $Id$
#
# Simple application level gateway config script.
#
# Assumes that SER/rtpproxy run on a machine, which connected to
# two non-routable letworks: 192.168.0.0/24 and 192.168.1.1/24.
#
# Correspondingly, this machine has two IP addresses: 192.168.0.1
# and 192.168.1.1.
#
# 192.168.0.0/24 - "internal" network
# 192.168.1.0/24 - "external" network
#
# rtpproxy started with `-l 192.168.0.1/192.168.1.1' option.
#
####### Global Parameters #########
debug=4
log_stderror=yes
log_facility=LOG_LOCAL7
fork=yes
children=4
/* uncomment the following lines to enable debugging */
#debug=9
#fork=no
#log_stderror=no
/* uncomment the next line to disable TCP (default on) */
#disable_tcp=yes
/* uncomment the next line to enable the auto temporary blacklisting of
not available destinations (default disabled) */
#disable_dns_blacklist=no
/* uncomment the next line to enable IPv6 lookup after IPv4 dns
lookup failures (default disabled) */
#dns_try_ipv6=yes
/* uncomment the next line to disable the auto discovery of local aliases
based on revers DNS on IPs (default on) */
#auto_aliases=on
#alias=l-at9875.rd.francetelecom.fr:5060
/* uncomment the following lines to enable TLS support (default off) */
#disable_tls = no
#listen = tls:your_IP:5061
#tls_verify_server = 1
#tls_verify_client = 1
#tls_require_client_certificate = 0
#tls_method = TLSv1
#tls_certificate = "/usr/local/etc/kamailio/tls/user/user-cert.pem"
#tls_private_key = "/usr/local/etc/kamailio/tls/user/user-privkey.pem"
#tls_ca_list = "/usr/local/etc/kamailio/tls/user/user-calist.pem"
port=5060
/* uncomment and configure the following line if you want Kamailio to
bind on a specific interface/port/proto (default bind on all available)
*/
listen=udp:192.168.0.2
listen=udp:10.10.10.2
# ------------------ module loading ----------------------------------
#set module path
mpath="/usr/local/lib64/kamailio/modules/"
/* uncomment next line for MySQL DB support */
loadmodule "db_mysql.so"
loadmodule "mi_fifo.so"
loadmodule "sl.so"
loadmodule "tm.so"
loadmodule "rr.so"
loadmodule "pv.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "uri_db.so"
loadmodule "siputils.so"
loadmodule "xlog.so"
loadmodule "acc.so"
loadmodule "auth.so"
loadmodule "auth_db.so"
loadmodule "domain.so"
loadmodule "presence.so"
loadmodule "presence_xml.so"
loadmodule "nathelper.so"
/* uncomment next line for aliases support
NOTE: a DB (like db_mysql) module must be also loaded */
#loadmodule "alias_db.so"
# ----------------- setting module-specific parameters ---------------
# ----- mi_fifo params -----
modparam("mi_fifo", "fifo_name", "/tmp/kamailio_fifo")
# ----- rr params -----
# add value to ;lr param to cope with most of the UAs
modparam("rr", "enable_full_lr", 1)
# do not append from tag to the RR (no need for this script)
modparam("rr", "append_fromtag", 0)
# ----- rr params -----
modparam("registrar", "method_filtering", 1)
/* uncomment the next line to disable parallel forking via location */
modparam("registrar", "append_branches", 0)
/* uncomment the next line not to allow more than 10 contacts per AOR */
modparam("registrar", "max_contacts", 10)
# ----- uri_db params -----
/* by default we disable the DB support in the module as we do not need it
in this configuration */
modparam("uri_db", "use_uri_table", 0)
modparam("uri_db", "db_url", "")
# ----- acc params -----
/* what sepcial events should be accounted ? */
modparam("acc", "early_media", 1)
modparam("acc", "report_ack", 1)
modparam("acc", "report_cancels", 1)
/* by default ww do not adjust the direct of the sequential requests.
if you enable this parameter, be sure the enable "append_fromtag"
in "rr" module */
modparam("acc", "detect_direction", 0)
/* account triggers (flags) */
modparam("acc", "failed_transaction_flag", 3)
modparam("acc", "log_flag", 1)
modparam("acc", "log_missed_flag", 2)
modparam("acc", "log_extra",
"src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")
/* uncomment the following lines to enable DB accounting also */
#c#modparam("acc", "db_flag", 1)
#c#modparam("acc", "db_missed_flag", 2)
#c#modparam("domain", "db_url",
#c# "mysql://openser:openserrw@localhost/openser")
#c#modparam("acc", "db_extra",
#c# "src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")
# ----- usrloc params -----
/* uncomment the following lines if you want to enable DB persistency
for location entries */
modparam("usrloc", "db_mode", 3)
modparam("usrloc", "db_url",
"mysql://openser:openserrw@localhost/openser")
# ----- auth_db params -----
/* uncomment the following lines if you want to enable the DB based
authentication */
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")
modparam("auth_db", "db_url",
"mysql://openser:openserrw@localhost/openser")
modparam("auth_db", "load_credentials", "")
# ----- alias_db params -----
/* uncomment the following lines if you want to enable the DB based
aliases */
#modparam("alias_db", "db_url",
# "mysql://openser:openserrw@localhost/openser")
# ----- domain params -----
/* uncomment the following lines to enable multi-domain detection
support */
modparam("domain", "db_url",
"mysql://openser:openserrw@localhost/openser")
modparam("domain", "db_mode", 1) # Use caching
# ----- multi-module params -----
/* uncomment the following line if you want to enable multi-domain support
in the modules (dafault off) */
modparam("alias_db|auth_db|usrloc|uri_db", "use_domain", 1)
# ----- presence params -----
/* uncomment the following lines if you want to enable presence */
modparam("presence|presence_xml", "db_url",
"mysql://openser:openserrw@localhost/openser")
modparam("presence_xml", "force_active", 1)
modparam("presence", "server_address",
"sip:10.10.10.2:5060")
# -- nathelper
modparam("nathelper", "rtpproxy_sock",
"udp:127.0.0.1:7890")
modparam("nathelper", "natping_interval", 15)
#--------xlog params---------
modparam("xlog","buf_size",8192)
# ------------------ main fun below ----------------------------------
route {
# initial sanity checks -- messages with
# max_forwars == 0, or excessively long requests,
# or those that don't addressed to us
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483", "Too Many Hops");
exit;
};
if (msg:len > max_len) {
sl_send_reply("513", "Message too big");
exit;
};
if (!(uri == myself) && method == "INVITE") {
sl_send_reply("403", "Call cannot be served here");
exit;
};
#####
if (has_totag()) {
# sequential request withing a dialog should
# take the path determined by record-routing
if (loose_route()) {
if (is_method("SUBSCRIBE") && uri == myself) {
# in-dialog subscribe requests
route(3);
exit;
}
if ( is_method("ACK") ) {
if ( t_check_trans() ) {
# non loose-route, but stateful ACK; must be an ACK after a 487 or e.g.
404 from upstream server
t_relay();
exit;
} else {
# ACK without matching transaction ... ignore and discard.\n");
exit;
}
}
sl_send_reply("404","Not here");
}
exit;
}
#### Request with no Username in RURI ####
# if ($rU==NULL) {
# sl_send_reply("484","Address Incomplete");
# exit;
# }
##### REGISTER ######
if (method == "REGISTER") {
route(2);
};
#### BYE CANCEL ####
if (method == "BYE" || method == "CANCEL")
unforce_rtp_proxy();
##### Do strict routing if pre-loaded route headers present ####
if (loose_route()) {
t_relay();
exit;
};
##### INVITE ######
if (is_method("INVITE")){
route(2);
record_route();
}
#### PUBLISH/SUBSCRIBE ####
if (is_method("PUBLISH|SUBSCRIBE")){
xlog("L_INFO", "SUBSCRIBE: method [$rm] from [$fu]\n");
route(3);
};
if (!t_relay())
sl_reply_error();
}
#################### ROUTES ##############################
######### Rtpproxy Bridge mode REGISTER/INVITE methods ###########
route[2]
{
if(is_method("REGISTER")) {
if (dst_ip == 10.10.10.2) {
save("location");
xlog("L_INFO","REGISTER [$ru] SIP Request: method [$rm] from [$fu] at
[$Tf]\n");
} else if (dst_ip == 192.168.0.2) {
save("location");
} else {
sl_send_reply("403", "Call cannot be served here");
}
exit;
}
if(is_method("INVITE")) {
if (lookup("location")) {
if (dst_ip == 10.10.10.2)
if (force_rtp_proxy("FAII"))
t_on_reply("1");
if (dst_ip == 192.168.0.2)
if (force_rtp_proxy("FAEI"))
t_on_reply("1");
} else if (lookup("location")) {
if (dst_ip == 10.10.10.2)
if (force_rtp_proxy("FAIE"))
t_on_reply("1");
if (dst_ip == 192.168.0.2)
if (force_rtp_proxy("FAEE"))
t_on_reply("1");
} else {
sl_send_reply("403", "Call cannot be served here");
exit;
}
}
return;
}
############## Presence ################
route[3]
{
if (!t_newtran())
{
sl_reply_error();
exit;
};
if(is_method("PUBLISH"))
{
handle_publish();
t_release();
}
else
if( is_method("SUBSCRIBE"))
{
handle_subscribe();
t_release();
}
exit;
# if presence enabled, this part will not be executed
if (is_method("PUBLISH") || $rU==null)
{
sl_send_reply("404", "Not here");
exit;
}
xlog("L_INFO","TestRoute [$fu] est rentre ici a [$Tf]\n");
return;
}
onreply_route[1] {
if (!(status=~"183" || status=~"200"))
exit;
force_rtp_proxy("FA");
}
Any idea ?
Cheers,
Karhu
--
View this message in context:
http://www.nabble.com/kamailio-multi-domain-tp23539467p23632701.html
Sent from the OpenSER Users Mailing List mailing list archive at Nabble.com.
