Hello,
On 03/07/06 04:16, Edson wrote:
I run it, now with FreeRadius in debug mode (see results in attached file), but nothing changed... I run with the two versions of radiusclient that I have...
Any idea?
I have seen that radius server returned authenticated, but the libradiusclient-ng returns failure. You should get some error message in the syslog file from libradiusclient-ng.
I will set up a radius server and play with it in my environment.
Cheers, Daniel
Edson.
PS: in attached file, You will find debug from OpenSER, FreeRadius and logs from /var/log/message and /var/log/radius/radacct/127.0.0.1/reply-detail-20060306.
-----Original Message----- From: Daniel-Constantin Mierla [mailto:daniel@voice-system.ro] Sent: sábado, 4 de março de 2006 08:24 To: Edson Cc: 'OpenSER (E-mail)' Subject: Re: [Users] Radius Authentication
Hello,
On 03/03/06 02:57, Edson wrote:
The working SER installation uses radiusclient-ng 0.5.0-1. It was
compiled
after a CVS download maded on the beginning on jun/2005. Unfortunatly I
miss
the source code and am using an i686-RPM derived from that code.
I already try to use this RPM (version 0.5.0-1) on the Xeon machine. The results are the same. Just same message on /var/log/messages:
"Mar 2 21:45:54 sip openser: rc_check_reply: received invalid reply
digest
from RADIUS server"
can you run the radius server in debug mode to see there what messages you get. Also, check the /var/log/syslog or /var/log/messages to see other error messages printed by radiusclient-ng library when you use debug mode with openser.
Cheers, Daniel
When I start "openser -TDdd I see: ... 0(16385) get_hdr_field: cseq <CSeq>: <4> <REGISTER> 0(16385) DEBUG:maxfwd:is_maxfwd_present: value = 70 0(16385) parse_headers: flags=200 0(16385) DEBUG: get_hdr_body : content_length=0 0(16385) found end of header 0(16385) find_first_route: No Route headers found 0(16385) loose_route: There is no Route HF 0(16385) grep_sock_info - checking if host==us: 13==13 &&
[ZZZ.ZZ.ZZZ.39]
== [ZZZ.ZZ.ZZZ.39] 0(16385) grep_sock_info - checking if port 5060 matches port 5060 0(16385) parse_headers: flags=ffffffffffffffff 0(16385) check_via_address(XXX.XX.XXX.120, 172.27.248.6, 0) 0(16385) lookup(): '' Not found in usrloc 0(16385) check_nonce(): comparing [440792edd872b52b27f6dbee8ab2af7f61016704] and [440792edd872b52b27f6dbee8ab2af7f61016704]
0(16385) ERROR:auth_radius:radius_authorize_sterman: rc_auth failed
0(16385) build_auth_hf(): 'WWW-Authenticate: Digest
realm="ZZZ.ZZ.ZZZ.39",
nonce="440792eeec1cb5b22b20c18355c2a9a71eeb1af7"' 0(16385) parse_headers: flags=ffffffffffffffff 0(16385) check_via_address(XXX.XX.XXX.120, 172.27.248.6, 0) 0(16385) DEBUG:destroy_avp_list: destroying list (nil) 0(16385) receive_msg: cleaning up ... I double checked all the "dictionary" definitions, triple checked my
OpenSER
and Radiusclient-NG config and were not able to find the mistake.
So I'm really out of ideas... Maybe is the return value
("Authenticated")
illegal?
Edson.
-----Original Message----- From: Daniel-Constantin Mierla [mailto:daniel@voice-system.ro] Sent: quinta-feira, 2 de março de 2006 09:29 To: Edson Cc: 'OpenSER (E-mail)' Subject: Re: [Users] Radius Authentication
Hello,
the error:
Mar 1 15:41:43 dell openser-TEST[20789]: rc_check_reply: received
invalid
reply digest from RADIUS server
comes from the radiusclient-ng library, in file "lib/sendserver.c" at line 498. Did you use the same version of radiusclient-ng before?
Cheers, Daniel
On 03/01/06 22:23, Edson wrote:
Hi, Guys...
As the MySQL problem is aparently solved I’m facing a Radius issue…
I'm
using FreeRadius 1.0.4, RadiusCliente-NG 0.5.2 and OpenSER 1.0.1.
If I duplicate the configs used with SER (and that it works fine) I’m
unable to authenticate my UA (the same that authenticate with SER). The message with “debug=4” is:
Mar 1 15:41:43 dell openser-TEST[20789]: check_nonce(): comparing
[4405ec129258d5cf9c016ade69cf37e33b5af52b] and [4405ec129258d5cf9c016ade69cf37e33b5af52b]
Mar 1 15:41:43 dell openser-TEST[20789]: rc_check_reply: received
invalid reply digest from RADIUS server
Mar 1 15:41:43 dell openser-TEST[20789]:
ERROR:auth_radius:radius_authorize_sterman: rc_auth failed
So I supposed that there were some failed configuration, I looked at
my
“radiusd.conf” and finded:
modules { ... digest { } ... } authorize { preprocess auth_log suffix digest sql } authenticate { digest }
As my FreeRadius back-end is a MySQL database, the 'sql' statement in
authorize seems ok. And so do 'digest' in 'autheticate' section.
The question remains: Why are OpenSER complain on Radius response?
Maybe
it's because of the sterman schema (?)....
Anyway, I try to test the server using the radtest tool. The output
seems good to me:
# radtest 8201@DOMAIN.VALID 8201 127.0.0.1 12345 MyServerPassword Sending Access-Request of id 255 to 127.0.0.1:1812 User-Name = "8201@DOMAIN.VALID" User-Password = "8201" NAS-IP-Address = sip NAS-Port = 12345 rad_recv: Access-Accept packet from host 127.0.0.1:1812, id=255,
length=35
Reply-Message = "Authenticated"So I discard FreeRadius config. Is this related on the value of
“Reply-
Message”? I already read all Radius material that I found on OpenSER
web-
page…
What am I doing wrong? What am I missing? As this same configs work
with
SER 0.9.2, why did it not with OpenSER 1.0.x?
Edson.
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users