Hi All,
Do i get eyeBeam freeware from any website. I do not have enough $s in my account to pay for eyebeam to test my presence server :-)
Thanks and Regards,
Akkala Naidu Paidi
A R I C E N T
5th Floor, Sigma Block, Sigma Soft Tech Park, Bangalore - 69 Mobile: +91 9886645448 Office: +91 08041069295
"Toni Barata" toni-r-barata@ptinovacao.pt Sent by: users-bounces@openser.org 06/21/2007 03:40 PM
To "KUMAR" kumar.kisalaya@gmail.com, "Dave Waiting" david@crg.ee.uct.ac.za cc users@openser.org Subject RE: [OpenSER-Users] Re: [Users] presence
Hi Kumar,
I recommend you the Eyebeam. Maybe you don't have the softphone well configured for presence, On the Presence Tab you have to choose "Presence Agent" for "Mode". On the Storage Tab you have to choose "XCAP" for "Storage Method" and enter your xcap server (e.g. http://<ip-address>:8080/xcap-root/) for "Root URL"
Regards, Toni
-----Original Message----- From: users-bounces@openser.org [mailto:users-bounces@openser.org] On Behalf Of KUMAR Sent: quinta-feira, 21 de Junho de 2007 10:04 To: Dave Waiting Cc: users@openser.org Subject: [OpenSER-Users] Re: [Users] presence
Can anyone recommend any good softphone for windows with which i can test presence. kumar
On 6/21/07, KUMAR kumar.kisalaya@gmail.com wrote:
Thank you Dave, That cleared a lot of things. kumar
On 6/21/07, Dave Waiting david@crg.ee.uct.ac.za wrote:
Hi Kumar
Unfortunately I don't have Eyebeam, so I'm not sure if it even
supports
XCAP, although from what I've heard it does. Maybe someone else can
give
you some guidance as to what settings need to be changed.
I think there is some confusion as to how XCAP works.
XCAP uses HTTP to retrieve and send documents to an XCAP server.
This
may or may not be located on the same machine as your SIP Presence server. As far as I know OpenSER only deals with SIP messages and therefore does not support the XCAP protocol. That's why you need
XCAP-lite.
The confusing part is that the OpenSER presence module can look at
XML
pres-rules documents that were obtained by the XCAP server and make presence decisions based on these documents. But OpenSER does not
deal
with the XCAP protocol itself, only the resulting XML documents.
XCAP-lite uses Apache to listen for incoming HTTP GET and PUT
requests.
Your client (eyebeam) must send the XML pres-rules documents using
HTTP
to the XCAP server (probably listening on port 80) and not to the
SIP
presence server (probably listening on port 5060).
So the openser.cfg file should not be consulted for XCAP requests,
only
for SIP PUBLISH and SUBSCRIBE presence requests. It looks to me like eyebeam is trying to set the pres-rules using SIP not XCAP and that
is
why it's not recognizing the event type. (Your openser.cfg file
looks
fine by the way.)
Regards
Dave
KUMAR wrote:
Hi Dave, Where do I need to change the settings, in Eyebeam or in
Openser.cfg.
I couldnt find any setting in the Eyebeam to make such change. As
for
my configuration file, i am attaching it alongwith. Thank you kumar
On 6/21/07, Dave Waiting david@crg.ee.uct.ac.za wrote:
Now that I look a little closer it seems that Eyebeam is trying
to
either get or set your pres-rules using a SIP SUBSCRIBE.
The XCAP protocol (and the XCAP-lite server) uses HTTP GET and
PUT
methods to set and retrieve the pres-rules documents. Try change
your
settings to use XCAP rather than SIP to change your pres-rules.
Hope this helps.
Dave Waiting wrote:
Hi Kumar
As far as I am aware the presence module adheres to RFC3856 and RFC3857. Therefore the only valid event types would be:
Event: presence
and
Event: presence.winfo
It seems strange that Eyebeam does not follow this syntax.
Perhaps
there is a setting you can change.
Regards
Dave
KUMAR wrote:
Hi all, I am using openser 1.2.1-notls (i386/linux), with eyebeam
configured
to use XCAP, and i sitll get the same error
PRESENCE: handle_subscribe:Missing or unsupported event header
field
value 2(12452) PRESENCE:handle_subscribe: ERROR occured 2(12452) WARNING: script writer didn't release transaction
The packet capture shows that the Events field in the
SUBSCRIBE have
Event: ua-profile;profile-type=application;auid="pres-rules"
Anyone please help me out. I really need to get this working. regards kumar
On 6/20/07, Klaus Darilion klaus.mailinglists@pernau.at
wrote:
> > > KUMAR wrote: > > About XCAP server, I am using XCAP simulator from > > (http://download.dns-hosting.info/XCAP/). What i want to
know is,
> do i > > need to give the address of XCAP server in the openser.cfg, > > no > > > or is it > > automatically used by the presence module. > > no > > The XCAP server is only used by the client - e.g. eyebeam. > > regards > klaus >
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
_______________________________________________ Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
_______________________________________________ Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
*********************** Aricent-Private ***********************
*********************** Aricent-Private ***********************
*********************** Aricent-Private *********************** "DISCLAIMER: This message is proprietary to Aricent and is intended solely for the use of the individual to whom it is addressed. It may contain privileged or confidential information and should not be circulated or used for any purpose other than for what it is intended. If you have received this message in error, please notify the originator immediately. If you are not the intended recipient, you are notified that you are strictly prohibited from using, copying, altering, or disclosing the contents of this message. Aricent accepts no responsibility for loss or damage arising from the use of the information transmitted by this email including damage from virus."