26 Jun
2006
26 Jun
'06
1:36 p.m.
Hi Reddy,
probably the message exceeds the 4096 bytes configured in the script.
try to increase the value or to disable the check (# if......#endif does
not work - try # or // for each line or the C like /*...*/)...
regards,
bogdan
Reddy, Muralidhar wrote:
Hello,
Everything works fine if I run Proxy without TLS disabled.
I tried both TCP/UDP, it works fine.
For TLS, Registration went fine however Proxy responds “513 Message
too big” to the Invite.
I don’t see any wrong headers in the message.
The length is almost same for TCP and TLS invite message, the only
change is sip and sips.
Any ‘C’ file or config file I need to modify?
Openser.conf:
debug=9 # debug level (cmd line: -dddddddddd)
/* Uncomment these lines to enter debugging mode
fork=no
log_stderror=yes
*/
check_via=yes
dns=no
rev_dns=no
port=5061
children=4
fifo="/tmp/openser_fifo"
disable_tls = 0
listen = tls:158.218.105.138:5061
tls_verify = on
tls_require_certificate = on
tls_method = TLSv1
tls_certificate = "/home/mreddy/tools/cert.pem"
tls_private_key = "/home/mreddy/tools/priv.pem"
tls_ca_list = "/home/mreddy/tools/root_cert_fluffyCA.pem"
#loadmodule "/usr/local/lib/openser/modules/mysql.so"
loadmodule "/usr/local/lib/openser/modules/sl.so"
loadmodule "/usr/local/lib/openser/modules/tm.so"
loadmodule "/usr/local/lib/openser/modules/rr.so"
loadmodule "/usr/local/lib/openser/modules/maxfwd.so"
loadmodule "/usr/local/lib/openser/modules/usrloc.so"
loadmodule "/usr/local/lib/openser/modules/registrar.so"
loadmodule "/usr/local/lib/openser/modules/textops.so"
route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
};
#if 1
if (msg:len >= 4096 ) {
sl_send_reply("513", "Message too big");
exit;
};
#endif
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
if (!method=="REGISTER")
record_route();
# subsequent messages withing a dialog should take the
# path determined by record-routing
if (loose_route()) {
# mark routing logic in request
append_hf("P-hint: rr-enforced\r\n");
route(1);
};
if (!uri==myself) {
route(1);
};
# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
if (uri==myself) {
if (method=="REGISTER") {
save("location");
exit;
};
lookup("aliases");
if (!uri==myself) {
append_hf("P-hint: outbound alias\r\n");
route(1);
};
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
exit;
};
append_hf("P-hint: usrloc applied\r\n");
};
route(1);
}
route[1] {
if (!t_relay()) {
sl_reply_error();
};
exit;
}
Thanks,
//Murali Reddy//
//Texas//// Instruments//
//Murali Reddy//
//Texas//// Instruments//
//Germantown////,MD//
//Phone: 301-515-3716//
//e-mail: ////mreddy(a)ti.com// <mailto:mreddy@ti.com>
------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users