But I use rtpengine_answer("codec-mask-opus codec-transcode-PCMA") and as I understand it should mask opus in OK and enable transcoding to PCMA.
"Change your config in side A to take only PCMA effective." - yes, I tested and it works well, but it is out of my scenario.   

On 20 February 2018 at 14:54, Gopalakrishnan N <saigop@gmail.com> wrote:
Yes correct. RTP is good since the OPUS codec is available in both the sides its getting negotiated. Change your config in side A to take only PCMA effective. 

On Tue, 20 Feb 2018 at 18:05 Denys Pozniak <denys.pozniak@crazycall.com> wrote:
Thank you for the answer, but from "SDP" point of view everything looks OK, I think issue is with my config or transcoding engine:

Side A INVITE-> Proxy/Rtpengine:

v=0
o=- 3543840537 1 IN IP4
s=SIPPER for PhonerLite
c=IN IP4 side_a
t=0 0
m=audio 55062 RTP/AVP 107 8
a=rtpmap:107 opus/48000/2
a=rtpmap:8 PCMA/8000
a=ssrc:1792443851
a=sendrecv

Proxy/Rtpengine OK -> Side A:

v=0
o=- 3728121777 3728121778 IN IP4
s=pjmedia
b=AS:50
t=0 0
a=X-nat:0
m=audio 30254 RTP/AVP 8
c=IN IP4 rtpengine
b=TIAS:32000
a=rtpmap:8 PCMA/8000
a=sendrecv
a=rtcp:30255

So here must be PCMA in direction from  Proxy/Rtpengine -> Side A, but I have opus.







On 20 February 2018 at 12:41, Gopalakrishnan N <saigop@gmail.com> wrote:
Hi Denys,

Am not much user of Kamilio, but am from Telecom background. The reason for your case is, in side A you have OPUS and in side B already OPUS is available and since both has the same codec as first priority it will negotiate itself with same codec and then it will look for other priority. Remove OPUS from side A and it will automatically go into transcoding mode. 

On Tue, 20 Feb 2018 at 16:17 Denys Pozniak <denys.pozniak@crazycall.com> wrote:
Hello!

Please explain how to achive next:

Side A supports:
OPUS
PCMA

Side B supports:
OPUS
PCMA
PCMU

I need to transcode in direction A->B from PCMA to OPUS?
So should be like this:
A(PCMA) -> (PCMA)Rtpengine(OPUS)->B(OPUS)

I configured like this:
rtpengine_offer("codec-mask-PCMA codec-transcode-opus");
rtpengine_answer("codec-mask-opus codec-transcode-PCMA");

But leg from Rtpengine to A has wrong codec (OPUS): 




On 19 February 2018 at 13:56, Richard Fuchs <rfuchs@sipwise.com> wrote:
On 2018-02-19 05:48 AM, Denys Pozniak wrote:
Hello!

Small note.
In case of opus use: codec-transcode-opus (opus is lowercase).

 As explained in the readme, the format generally follows the SDP format, including specifying sample rate and number of channels. As an additional parameter, the bitrate can be specified for codecs that support it.

Examples:

transcode-speex/32000

transcode-opus/48000/2/64000


Cheers

_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users



--

BR
Denys Pozniak
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users




--

BR
Denys Pozniak
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users




--

BR
Denys Pozniak