Hi,
Thank you for your prompt reply.
I have tested :~ set log_stderr=yes and fork=no and debug=3 in sems.conf. I
have attached the log. Please help.
<<SemsError1.txt>> <<sems.conf>>
I have also tested this ps ax | grep sems. I get this result:~
[root@sipserver2 root]# ps ax | grep sems
5518 ? S 1:25 gedit file:///etc/sems/sems.conf
7805 pts/0 S 0:00 grep sems
Regards,
Shirley
-----Original Message-----
From: Ulrich Abend [SMTP:ullstar@iptel.org
Sent: Thursday, April 08, 2004 12:18 AM
To: Shirley
Cc: serusers(a)lists.iptel.org
Subject: Re: [Serusers] Sems Error
Hi,
try to set log_stderr=yes and fork=no and debug=3 in sems.conf for
testing, it
should produce a lot of debugging output on your console when starting up.
There are a lot of possible reasons for SEMS not starting, please post the
debugging output either from the commands above or from /var/log/syslog
(under redhat the file might be another one under /var/log/ ...)
You can also check is sems runs by calling in your shell:
ps ax | grep sems
Regards,
Uli.
P.S.: Please always CC to the list, others might answer quicker than me
:-)
On Wednesday 07 April 2004 14:43, Shirley wrote:
Hi,
Thank you for your reply. How to make sure that the SEMS is running?
I uses the /usr/local/sin/sems.redhat start- to start the sems service?
Am
I correct?
My fifo name is same in both file that you mention. Please advice!
Thanks
Regards,
Shirley
> -----Original Message-----
> From: Ulrich Abend [SMTP:ullstar@iptel.org]
> Sent: Wednesday, April 07, 2004 8:00 PM
> To: serusers(a)lists.iptel.org
> Cc: Shirley
> Subject: Re: [Serusers] Sems Error
>
> Hi,
>
> you should make shure, SEMS is running and uses the same fifo name (in
> sems.conf) as SER (in ser.cfg).
>
> It is also important, that the fifo file (default: /tmp/am_fifo) has
> write
>
> permissions for the user SER runs as. The easiest setup is to run SER
and
> SEMS as the same user.
>
> If you still experience problems, please post SER and SEMS debugging
> output,
> the config files, and the results of
> ls -la /tmp/*fifo
>
> Regards,
>
> Uli.
>
> On Wednesday 07 April 2004 12:28, Shirley wrote:
> > Hi all,
> >
> > Please Help!!! I am trying to install the sems when I try to start
the
>
> sems
>
> > I encountered this problem as per below. I am running on Linux 9.0
and
> > please also advice on how to check the
fifo version....Thanks
> >
> > Mar 24 19:04:25 sipserver2 /usr/local/sbin/ser[12876]: ERROR:
> > voicemail: ans_machine deamon is not running !
> > Mar 24 19:04:25 sipserver2 /usr/local/sbin/ser[12876]: ERROR:
> > voicemail:
>
> No
>
> > such device or address
> > Mar 24 19:04:25 sipserver2 /usr/local/sbin/ser[12876]: ERROR:
vm_start:
> > write_to_fifo failed
> > Mar 24 19:04:35 sipserver2 /usr/local/sbin/ser[12874]: ERROR:
> > voicemail: ans_machine deamon is not running !
> > Mar 24 19:04:35 sipserver2 /usr/local/sbin/ser[12874]: ERROR:
> > voicemail:
>
> No
>
> > such device or address
> > Mar 24 19:04:35 sipserver2 /usr/local/sbin/ser[12874]: ERROR:
vm_start:
> > > write_to_fifo failed
> > >
> > > regards,
> > > shirley
> > >
> > > _______________________________________________
> > > Serusers mailing list
> > > serusers(a)lists.iptel.org
> > >
http://lists.iptel.org/mailman/listinfo/serusers