Thanks once again Alan.
Yes that's exactly what I did, but still cannot get it to work. One thing that I noted is that although I am enabling the remote-party-id under sip-ua, this does not show in the config file. Is this normal?
Regards,
Charles
----- Original Message ----- From: "Alan Litster" alitster@telcoelectronics.co.uk To: "SER Mailing List" serusers@lists.iptel.org Cc: "Charles Galea" charles.galea@maltacom.com Sent: Tuesday, July 13, 2004 10:52 Subject: RE: [Serusers] Remote Party ID
If I understand you correctly you want the 3600 to handle the remote party id field?
I'm not familiar with the 3600 but I assume it is identical to a AS5300.
On
that to enable processing of the remote party ID field, under the sip-ua configuration mode you simply have to set 'remote-party-id'.
Regards,
Alan
-----Original Message----- From: serusers-bounces@iptel.org [mailto:serusers-bounces@lists.iptel.org]On Behalf Of Charles Galea Sent: 13 July 2004 06:49 To: iancu@fokus.fraunhofer.de Cc: serusers@lists.iptel.org Subject: Re: [Serusers] Remote Party ID
Thanks a lot,
i have included an authentication check before append_rpid_hf() and now it is working fine. Now I am trying to figure out why my 3600 gateway is
still
not sending the calling party field in the setup message.
Regards,
Charles
----- Original Message ----- From: "Bogdan-Andrei IANCU" iancu@fokus.fraunhofer.de To: "Charles Galea" charles.galea@maltacom.com Cc: serusers@lists.iptel.org; "'Andrew Caruana'" andrew.caruana@maltacom.com Sent: Monday, July 12, 2004 13:58 Subject: Re: [Serusers] Remote Party ID
rpid is fetched from db during an authentication check. so, if you don't have any authentication before append_rpid_hf(), we will not have any
rpid.
bogdan
Charles Galea wrote:
We have downloaded the latest ser software from cvs in order to support appending of remote party id while using mysql as the ser database. After compiling and installing the ser software we included the auth and auth_db parameters and also the append_rpid_hf() function in our ser.cfg file as shown below.
SER server starts and registration is successfull however when forwarding to the pstn gateway, ser will not append the remote party id header, even if the rpid and uri columns in mysql database are populated accordingly using the serctl add rpid command. Calls are also successfull however the gateway will not include the calling party number in the setup message because the rpid header is missing.
Any ideas please?
Thanks
Charles and Andrew
# ----------- global configuration parameters ------------------------
#debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E)
/* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */
check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
loadmodule "/our_downloads/sip_router/modules/mysql/mysql.so" #loadmodule "//lib/ser/modules/mysql.so"
loadmodule "//lib/ser/modules/sl.so" loadmodule "//lib/ser/modules/tm.so" loadmodule "//lib/ser/modules/rr.so" loadmodule "//lib/ser/modules/maxfwd.so" loadmodule "//lib/ser/modules/usrloc.so" loadmodule "//lib/ser/modules/registrar.so" loadmodule "//lib/ser/modules/textops.so"
# Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "//lib/ser/modules/auth.so" loadmodule "//lib/ser/modules/auth_db.so"
#loadmodule "//lib/ser/modules/acc.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
#modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 1)
# -- auth params --
modparam("auth_db", "use_rpid", 1) modparam("auth_db", "rpid_column", "rpid") modparam("auth", "rpid_prefix", "<sip:") modparam("auth", "rpid_suffix", "@testphone.com>:party=calling;screen=no;privacy=off")
# Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password")
# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; };
# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; };
# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri=~"testphone.com") { lookup("aliases"); if (method=="REGISTER") {
#Uncomment this if you want to use digest authentication if (!www_authorize("testphone.com", "subscriber")) { www_challenge("testphone.com", "0"); append_rpid_hf(); break; };
save("location"); break; };
if (uri=~"^sip:21") { append_rpid_hf(); forward(a valid ip address for the gateway wasinserted here); break; }
if (uri=~"^sip:123") { forward(a valid ip address for the gareway wasinserted here); break; }
# native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; };
# forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); };
}
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
-----------------------------
This email, and any files transmitted with it, is copyright and may
contain confidential information.
The contents are intended for the use of the addressee(s) only. Unauthorized use may be unlawful. If you receive this email by mistake, please advise sender immediately. The views of the author may not necessarily constitute the views of Telco
Electronics Limited.
Nothing in this mail shall bind Telco Electronics Limited in any contract
or obligation.
Telco Electronics Limited 6-8 Oxford Court Brackley Northants NN13 7XY
Tel 07000 701999 Fax 07000 701777