Hello Daniel!

Thanks for your help again!!

I placed the instruction just after the "authentication" and now it is working as I want!



Bruno Emer




2015-04-09 15:33 GMT-03:00 Bruno Emer <brunoemer@gmail.com>:
Hello all!

I have a scenario here where I need to put more than two companies into the same Kamailio server and to accomplish this I'm using a multi-domain configuration.

For now, I am able to create users in different domains and register all of them. The users are able to place and receive internal calls (as I am using this just to get internal communications working), so I am ok with this part of my configuration.

The problem that I'm facing now is that users from domain "A" are able to place calls to users from domain "B". I need to deny calls between different domains, and I don't know the best way to achieve this.

Here are my domains create (output from "kamctl domain show"):



And here are my users created:

username: bob

username: alice


So, can you please help me to get this?


Here is my .cfg file:


#!KAMAILIO
#!define WITH_PGSQL
#!define WITH_AUTH
#!define WITH_USRLOCDB
##!define WITH_NAT
##!define WITH_DEBUG
#!define WITH_MULTIDOMAIN
##!define WITH_SIPTRACE
#!define WITH_SQLOPS
#!define WITH_XMLRPC
##!define WITH_603
#!define WITH_TLS
#


#!substdef "!MY_WS_PORT!80!g"
#!substdef "!MY_WSS_PORT!81!g"
#!substdef "!MY_WS_ADDR!eth1:MY_WS_PORT!g"
#!substdef "!MY_WSS_ADDR!tls:eth1:MY_WSS_PORT!g"

#!define WITH_WEBSOCKETS


#!ifdef ACCDB_COMMENT
  ALTER TABLE acc ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT '';
  ALTER TABLE acc ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT '';
  ALTER TABLE acc ADD COLUMN src_ip varchar(64) NOT NULL default '';
  ALTER TABLE acc ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT '';
  ALTER TABLE acc ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT '';
  ALTER TABLE acc ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT '';
  ALTER TABLE missed_calls ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT '';
  ALTER TABLE missed_calls ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT '';
  ALTER TABLE missed_calls ADD COLUMN src_ip varchar(64) NOT NULL default '';
  ALTER TABLE missed_calls ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT '';
  ALTER TABLE missed_calls ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT '';
  ALTER TABLE missed_calls ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT '';
#!endif

####### Include Local Config If Exists #########
import_file "kamailio-local.cfg"

####### Defined Values #########

# *** Value defines - IDs used later in config
#!ifdef WITH_PGSQL
# - database URL - used to connect to database server by modules such
#       as: auth_db, acc, usrloc, a.s.o.
#!define DBURL "postgres://kamailio:kamailiorw@localhost/kamailio"
#!endif
#!ifdef WITH_MULTIDOMAIN
# - the value for 'use_domain' parameters
#!define MULTIDOMAIN 1
#!else
#!define MULTIDOMAIN 0
#!endif

# - flags
#   FLT_ - per transaction (message) flags
#       FLB_ - per branch flags
#!define FLT_ACC 1
#!define FLT_ACCMISSED 2
#!define FLT_ACCFAILED 3
#!define FLT_NATS 5

#!define FLB_NATB 6
#!define FLB_NATSIPPING 7

####### Global Parameters #########

### LOG Levels: 3=DBG, 2=INFO, 1=NOTICE, 0=WARN, -1=ERR
#!ifdef WITH_DEBUG
debug=4
log_stderror=yes
#!else
debug=2
log_stderror=no
#!endif


memdbg=5
memlog=5

log_facility=LOG_LOCAL0

fork=yes
children=4

/* uncomment the next line to disable TCP (default on) */
disable_tcp=no
tcp_accept_no_cl=yes

/* uncomment the next line to disable the auto discovery of local aliases
   based on reverse DNS on IPs (default on) */
#auto_aliases=no

/* add local domain aliases */

/* uncomment and configure the following line if you want Kamailio to
   bind on a specific interface/port/proto (default bind on all available) */
#listen=udp:10.0.0.10:5060

/* port to listen to
 * - can be specified more than once if needed to listen on many ports */
port=5060

#!ifdef WITH_TLS
enable_tls=yes
#!endif

# life time of TCP connection when there is no traffic
# - a bit higher than registration expires to cope with UA behind NAT
tcp_connection_lifetime=3605
tcp_rd_buf_size=6144

listen=eth1
#!ifdef WITH_WEBSOCKETS
listen=MY_WS_ADDR
#!ifdef WITH_TLS
listen=eth1
#!endif
#!endif

####### Custom Parameters #########

# These parameters can be modified runtime via RPC interface
# - see the documentation of 'cfg_rpc' module.
#
# Format: group.id = value 'desc' description
#

#!ifdef WITH_PSTN
# PSTN GW Routing
#
# - pstn.gw_ip: valid IP or hostname as string value, example:
# pstn.gw_ip = "10.0.0.101" desc "My PSTN GW Address"
#
# - by default is empty to avoid misrouting
pstn.gw_ip = "" desc "PSTN GW Address"
pstn.gw_port = "" desc "PSTN GW Port"
#!endif

#!ifdef WITH_VOICEMAIL
# VoiceMail Routing on offline, busy or no answer
#
# - by default Voicemail server IP is empty to avoid misrouting
voicemail.srv_ip = "" desc "VoiceMail IP Address"
voicemail.srv_port = "5060" desc "VoiceMail Port"
#!endif

####### Modules Section ########

# set paths to location of modules (to sources or installation folders)
#!ifdef WITH_SRCPATH
mpath="modules/"
#!else
mpath="/usr/lib/x86_64-linux-gnu/kamailio/modules/"
#!endif

#!ifdef WITH_PGSQL
loadmodule "db_postgres.so"
#!endif

loadmodule "mi_fifo.so"
loadmodule "kex.so"
loadmodule "corex.so"
loadmodule "tm.so"
loadmodule "tmx.so"
loadmodule "sl.so"
loadmodule "rr.so"
loadmodule "pv.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "siputils.so"
loadmodule "xlog.so"
loadmodule "sanity.so"
loadmodule "ctl.so"
loadmodule "cfg_rpc.so"
loadmodule "mi_rpc.so"
loadmodule "acc.so"

#!ifdef WITH_AUTH
loadmodule "auth.so"
loadmodule "auth_db.so"
#!ifdef WITH_IPAUTH
loadmodule "permissions.so"
#!endif
#!endif

#!ifdef WITH_ALIASDB
loadmodule "alias_db.so"
#!endif

#!ifdef WITH_SPEEDDIAL
loadmodule "speeddial.so"
#!endif

#!ifdef WITH_MULTIDOMAIN
loadmodule "domain.so"
#!endif

#!ifdef WITH_PRESENCE
loadmodule "presence.so"
loadmodule "presence_xml.so"
#!endif

#!ifdef WITH_NAT
loadmodule "nathelper.so"
loadmodule "rtpproxy.so"
#!endif

#!ifdef WITH_TLS
loadmodule "tls.so"
#!endif

#!ifdef WITH_ANTIFLOOD
loadmodule "htable.so"
loadmodule "pike.so"
#!endif

#!ifdef WITH_XMLRPC
loadmodule "xmlrpc.so"
#!endif

#!ifdef WITH_DEBUG
loadmodule "debugger.so"
#!endif

#!ifdef WITH_SIPTRACE
loadmodule "siptrace.so"
#!endif

#!ifdef WITH_SQLOPS
loadmodule "sqlops.so"
#!endif

#!ifdef WITH_WEBSOCKETS
loadmodule "xhttp.so"
loadmodule "websocket.so"
loadmodule "nathelper.so"
#!endif

# ----------------- setting module-specific parameters ---------------

# ---- sip_trace params ----
#!ifdef WITH_SIPTRACE
modparam("siptrace", "db_url", "postgres://kamailio:kamailiorw@localhost/kamailio")
modparam("siptrace", "trace_on", 1)
modparam("siptrace", "trace_flag", 22)
modparam("siptrace", "trace_sl_acks", 0)
#!endif

# ----- mi_fifo params -----
modparam("mi_fifo", "fifo_name", "/tmp/kamailio_fifo")


# ----- tm params -----
# auto-discard branches from previous serial forking leg
modparam("tm", "failure_reply_mode", 3)
# default retransmission timeout: 30sec
modparam("tm", "fr_timer", 30000)
# default invite retransmission timeout after 1xx: 120sec
modparam("tm", "fr_inv_timer", 120000)

# add value to ;lr param to cope with most of the UAs
modparam("rr", "enable_full_lr", 1)
# do not append from tag to the RR (no need for this script)
modparam("rr", "append_fromtag", 0)


# ----- registrar params -----
modparam("registrar", "method_filtering", 1)
/* uncomment the next line to disable parallel forking via location */
# modparam("registrar", "append_branches", 0)
/* uncomment the next line not to allow more than 10 contacts per AOR */
#modparam("registrar", "max_contacts", 10)
# max value for expires of registrations
modparam("registrar", "max_expires", 300)
modparam("registrar", "min_expires", 30)
# set it to 1 to enable GRUU
modparam("registrar", "gruu_enabled", 0)


# ----- acc params -----
/* what special events should be accounted ? */
modparam("acc", "early_media", 0)
modparam("acc", "report_ack", 0)
modparam("acc", "report_cancels", 0)
/* by default ww do not adjust the direct of the sequential requests.
   if you enable this parameter, be sure the enable "append_fromtag"
   in "rr" module */
modparam("acc", "detect_direction", 0)
/* account triggers (flags) */
modparam("acc", "log_flag", FLT_ACC)
modparam("acc", "log_missed_flag", FLT_ACCMISSED)
modparam("acc", "log_extra",
        "src_user=$fU;src_domain=$fd;src_ip=$si;"
        "dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")
modparam("acc", "failed_transaction_flag", FLT_ACCFAILED)
/* enhanced DB accounting */
#!ifdef WITH_ACCDB
modparam("acc", "db_flag", FLT_ACC)
modparam("acc", "db_missed_flag", FLT_ACCMISSED)
modparam("acc", "db_url", DBURL)
modparam("acc", "db_extra",
        "src_user=$fU;src_domain=$fd;src_ip=$si;"
        "dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")
#!endif


# ----- usrloc params -----
/* enable DB persistency for location entries */
#!ifdef WITH_USRLOCDB
modparam("usrloc", "db_url", DBURL)
modparam("usrloc", "db_mode", 2)
modparam("usrloc", "use_domain", MULTIDOMAIN)
#!endif


# ----- auth_db params -----
#!ifdef WITH_AUTH
modparam("auth_db", "db_url", DBURL)
modparam("auth_db", "calculate_ha1", 0)
#modparam("auth_db", "password_column", "password")
modparam("auth_db", "load_credentials", "")
modparam("auth_db", "use_domain", MULTIDOMAIN)
#modparam("auth_db", "use_domain", 1)

# ----- permissions params -----
#!ifdef WITH_IPAUTH
modparam("permissions", "db_url", DBURL)
modparam("permissions", "db_mode", 1)
#!endif

#!endif


# ----- alias_db params -----
#!ifdef WITH_ALIASDB
modparam("alias_db", "db_url", DBURL)
modparam("alias_db", "use_domain", MULTIDOMAIN)
#!endif


# ----- speeddial params -----
#!ifdef WITH_SPEEDDIAL
modparam("speeddial", "db_url", DBURL)
modparam("speeddial", "use_domain", MULTIDOMAIN)
#!endif


# ----- domain params -----
#!ifdef WITH_MULTIDOMAIN
modparam("domain", "db_url", DBURL)
# register callback to match myself condition with domains list
modparam("domain", "register_myself", 1)
#!endif


#!ifdef WITH_PRESENCE
# ----- presence params -----
modparam("presence", "db_url", DBURL)

# ----- presence_xml params -----
modparam("presence_xml", "db_url", DBURL)
modparam("presence_xml", "force_active", 1)
#!endif


#!ifdef WITH_NAT
# ----- rtpproxy params -----
modparam("rtpproxy", "rtpproxy_sock", "udp:127.0.0.1:7722")
# ----- nathelper params -----
modparam("nathelper", "natping_interval", 30)
modparam("nathelper", "ping_nated_only", 1)
modparam("nathelper", "sipping_bflag", FLB_NATSIPPING)
modparam("nathelper", "sipping_from", "sip:pinger@kamailio.org")

# params needed for NAT traversal in other modules
modparam("nathelper|registrar", "received_avp", "$avp(RECEIVED)")
modparam("usrloc", "nat_bflag", FLB_NATB)
#!endif


#!ifdef WITH_TLS
# ----- tls params -----
modparam("tls", "connection_timeout", 60)
modparam("tls", "tls_debug", 10)
modparam("tls", "config", "/usr/local/etc/kamailio/tls.cfg")
#modparam("tls", "verify_certificate", 1)
#modparam("tls", "require_certificate", 0)
#!endif

#!ifdef WITH_ANTIFLOOD
# ----- pike params -----
modparam("pike", "sampling_time_unit", 2)
modparam("pike", "reqs_density_per_unit", 16)
modparam("pike", "remove_latency", 4)

# ----- htable params -----
# ip ban htable with autoexpire after 5 minutes
modparam("htable", "htable", "ipban=>size=8;autoexpire=300;")
#!endif

#!ifdef WITH_XMLRPC
# ----- xmlrpc params -----
modparam("xmlrpc", "route", "XMLRPC");
modparam("xmlrpc", "url_match", "^/RPC")
#!endif

#!ifdef WITH_DEBUG
# ----- debugger params -----
modparam("debugger", "cfgtrace", 1)
#!endif


#!ifdef WITH_WEBSOCKETS
# ----- nathelper params -----
modparam("nathelper|registrar", "received_avp", "$avp(RECEIVED)")
# Note: leaving NAT pings turned off here as nathelper is _only_ being used for
#       WebSocket connections.  NAT pings are not needed as WebSockets have
#       their own keep-alives.
#!endif



####### Routing Logic ########

# Main SIP request routing logic
# - processing of any incoming SIP request starts with this route
# - note: this is the same as route { ... }
request_route {

        route(REQINIT);


    #!ifdef WITH_SIPTRACE
        if($hdr(X-Omnz-SipTrace) !=$null)
            {
                sip_trace();
                setflag(22);
            }
    #!endif


#!ifdef WITH_WEBSOCKETS
        if (nat_uac_test(64)) {
                # Do NAT traversal stuff for requests from a WebSocket
                # connection - even if it is not behind a NAT!
                # This won't be needed in the future if Kamailio and the
                # WebSocket client support Outbound and Path.
                force_rport();
                if (is_method("REGISTER"))
                        fix_nated_register();
                else {
                        if (!add_contact_alias()) {
                                xlog("L_ERR", "Error aliasing contact <$ct>\n");
                                sl_send_reply("400", "Bad Request");
                                exit;
                        }
                }
        }
#!endif


        # NAT detection
        route(NATDETECT);

        # CANCEL processing
        if (is_method("CANCEL"))
        {
                if (t_check_trans()) {
                        route(RELAY);
                }
                exit;
        }

        # handle requests within SIP dialogs
        route(WITHINDLG);

        ### only initial requests (no To tag)

        t_check_trans();

        # authentication
        route(AUTH);

        # record routing for dialog forming requests (in case they are routed)
        # - remove preloaded route headers
        remove_hf("Route");
        if (is_method("INVITE|SUBSCRIBE"))
                record_route();

        # account only INVITEs
        if (is_method("INVITE"))
        {
                setflag(FLT_ACC); # do accounting
        }

        # dispatch requests to foreign domains
        route(SIPOUT);

        ### requests for my local domains

        # handle presence related requests
        route(PRESENCE);


        # handle registrations
        route(REGISTRAR);

        if ($rU==$null)
        {
                # request with no Username in RURI
                sl_send_reply("484","Address Incomplete");
                exit;
        }

        # dispatch destinations to PSTN
        route(PSTN);

        # user location service
        route(LOCATION);
}


route[RELAY] {

        # enable additional event routes for forwarded requests
        # - serial forking, RTP relaying handling, a.s.o.


#!ifdef WITH_603
                if (is_method("INVITE")) {
                if($hdr(X-Omz-int-Id) ==$null)
                        {
                                # request with no Username in RURI
                                sl_send_reply("603","Declined");
                                exit;
                        } 
}
                #!endif



        if (is_method("INVITE|BYE|SUBSCRIBE|UPDATE")) {
                if(!t_is_set("branch_route")) t_on_branch("MANAGE_BRANCH");
        }
        if (is_method("INVITE|SUBSCRIBE|UPDATE")) {
                if(!t_is_set("onreply_route")) t_on_reply("MANAGE_REPLY");
        }
        if (is_method("INVITE")) {
                if(!t_is_set("failure_route")) t_on_failure("MANAGE_FAILURE");
        }

        if (!t_relay()) {
                sl_reply_error();
        }
        exit;
}


# Per SIP request initial checks
route[REQINIT] {
#!ifdef WITH_ANTIFLOOD
        # flood dection from same IP and traffic ban for a while
        # be sure you exclude checking trusted peers, such as pstn gateways
        # - local host excluded (e.g., loop to self)
        if(src_ip!=myself)
        {
                if($sht(ipban=>$si)!=$null)
                {
                        # ip is already blocked
                        xdbg("request from blocked IP - $rm from $fu (IP:$si:$sp)\n");
                        exit;
                }
                if (!pike_check_req())
                {
                        xlog("L_ALERT","ALERT: pike blocking $rm from $fu (IP:$si:$sp)\n");
                        $sht(ipban=>$si) = 1;
                        exit;
                }
        }
#!endif

        if (!mf_process_maxfwd_header("10")) {
                sl_send_reply("483","Too Many Hops");
                exit;
        }

        if(!sanity_check("1511", "7"))
        {
                xlog("Malformed SIP message from $si:$sp\n");
                exit;
        }
}


# Handle requests within SIP dialogs
route[WITHINDLG] {
        if (has_totag()) {
                # sequential request withing a dialog should
                # take the path determined by record-routing
                if (loose_route()) {


#!ifdef WITH_WEBSOCKETS
                        if ($du == "") {
                                if (!handle_ruri_alias()) {
                                        xlog("L_ERR", "Bad alias <$ru>\n");
                                        sl_send_reply("400", "Bad Request");
                                        exit;
                                }
                        }
#!endif



                        route(DLGURI);
                        if (is_method("BYE")) {
                                setflag(FLT_ACC); # do accounting ...
                                setflag(FLT_ACCFAILED); # ... even if the transaction fails
                        }
                        else if ( is_method("ACK") ) {
                                # ACK is forwarded statelessy
                                route(NATMANAGE);
                        }
                        else if ( is_method("NOTIFY") ) {
                                # Add Record-Route for in-dialog NOTIFY as per RFC 6665.
                                record_route();
                        }
                        route(RELAY);
                } else {
                        if (is_method("SUBSCRIBE") && uri == myself) {
                                # in-dialog subscribe requests
                                route(PRESENCE);
                                exit;
                        }
                        if ( is_method("ACK") ) {
                                if ( t_check_trans() ) {
                                        # no loose-route, but stateful ACK;
                                        # must be an ACK after a 487
                                        # or e.g. 404 from upstream server
                                        route(RELAY);
                                        exit;
                                } else {
                                        # ACK without matching transaction ... ignore and discard
                                        exit;
                                }
                        }
                        sl_send_reply("404","Not here");
                }
                exit;
        }
}

# Handle SIP registrations
route[REGISTRAR] {
        if (is_method("REGISTER"))
        {
                if(isflagset(FLT_NATS))
                {
                        setbflag(FLB_NATB);
                        # uncomment next line to do SIP NAT pinging 
                        ## setbflag(FLB_NATSIPPING);
                }
                if (!save("location"))
                        sl_reply_error();

                exit;
        }
}

# USER location service
route[LOCATION] {

#!ifdef WITH_SPEEDDIAL
        # search for short dialing - 2-digit extension
        if($rU=~"^[0-9][0-9]$")
                if(sd_lookup("speed_dial"))
                        route(SIPOUT);
#!endif

#!ifdef WITH_ALIASDB
        # search in DB-based aliases
        if(alias_db_lookup("dbaliases"))
                route(SIPOUT);
#!endif

        $avp(oexten) = $rU;
        if (!lookup("location")) {
                $var(rc) = $rc;
                route(TOVOICEMAIL);
                t_newtran();
                switch ($var(rc)) {
                        case -1:
                        case -3:
                                send_reply("404", "Not Found");
                                exit;
                        case -2:
                                send_reply("405", "Method Not Allowed");
                                exit;
                }
        }

        # when routing via usrloc, log the missed calls also
        if (is_method("INVITE"))
        {
                setflag(FLT_ACCMISSED);
        }

        route(RELAY);
        exit;
}

# Presence server route
route[PRESENCE] {
        if(!is_method("PUBLISH|SUBSCRIBE"))
                return;

#!ifdef WITH_PRESENCE
        if (!t_newtran())
        {
                sl_reply_error();
                exit;
        };

        if(is_method("PUBLISH"))
        {
                handle_publish();
                t_release();
        }
        else
        if( is_method("SUBSCRIBE"))
        {
                handle_subscribe();
                t_release();
        }
        exit;
#!endif

        # if presence enabled, this part will not be executed
        if (is_method("PUBLISH") || $rU==$null)
        {
                sl_send_reply("404", "Not here");
                exit;
        }
        return;
}

# Authentication route
route[AUTH] {
#!ifdef WITH_AUTH

#!ifdef WITH_IPAUTH
        if((!is_method("REGISTER")) && allow_source_address())
        {
                # source IP allowed
                return;
        }
#!endif

        if (is_method("REGISTER") || from_uri==myself)
        {
                # authenticate requests
                if (!auth_check("$fd", "subscriber", "1")) {
                        auth_challenge("$fd", "0");
                        exit;
                }
                # user authenticated - remove auth header
                if(!is_method("REGISTER|PUBLISH"))
                        consume_credentials();
        }
        # if caller is not local subscriber, then check if it calls
        # a local destination, otherwise deny, not an open relay here
        if (from_uri!=myself && uri!=myself)
        {
                sl_send_reply("403","Not relaying");
                exit;
        }

#!endif
        return;
}

# Caller NAT detection route
route[NATDETECT] {
#!ifdef WITH_NAT
        force_rport();
        if (nat_uac_test("19")) {
                if (is_method("REGISTER")) {
                        fix_nated_register();
                } else {
                        add_contact_alias();
                }
                setflag(FLT_NATS);
        }
#!endif
        return;
}

# RTPProxy control
route[NATMANAGE] {
#!ifdef WITH_NAT
        if (is_request()) {
                if(has_totag()) {
                        if(check_route_param("nat=yes")) {
                                setbflag(FLB_NATB);
                        }
                }
        }
        if (!(isflagset(FLT_NATS) || isbflagset(FLB_NATB)))
                return;

        rtpproxy_manage("co");

        if (is_request()) {
                if (!has_totag()) {
                        if(t_is_branch_route()) {
                                add_rr_param(";nat=yes");
                        }
                }
        }
        if (is_reply()) {
                if(isbflagset(FLB_NATB)) {
                        add_contact_alias();
                }
        }
#!endif
        return;
}

# URI update for dialog requests
route[DLGURI] {
#!ifdef WITH_NAT
        if(!isdsturiset()) {
                handle_ruri_alias();
        }
#!endif
        return;
}

# Routing to foreign domains
route[SIPOUT] {
        if (!uri==myself)
        {
                append_hf("P-hint: outbound\r\n");
                route(RELAY);
        }
}

# PSTN GW routing
route[PSTN] {
#!ifdef WITH_PSTN
        # check if PSTN GW IP is defined
        if (strempty($sel(cfg_get.pstn.gw_ip))) {
                xlog("SCRIPT: PSTN rotuing enabled but pstn.gw_ip not defined\n");
                return;
        }

        # route to PSTN dialed numbers starting with '+' or '00'
        #     (international format)
        # - update the condition to match your dialing rules for PSTN routing
        if(!($rU=~"^(\+|00)[1-9][0-9]{3,20}$"))
                return;

        # only local users allowed to call
        if(from_uri!=myself) {
                sl_send_reply("403", "Not Allowed");
                exit;
        }

        if (strempty($sel(cfg_get.pstn.gw_port))) {
                $ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip);
        } else {
                $ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip) + ":"
                                        + $sel(cfg_get.pstn.gw_port);
        }

        route(RELAY);
        exit;
#!endif

        return;
}

# XMLRPC routing
#!ifdef WITH_XMLRPC
route[XMLRPC] {
        # allow XMLRPC from localhost
        if ((method=="POST" || method=="GET")
                        && (src_ip==127.0.0.1)) {
                # close connection only for xmlrpclib user agents (there is a bug in
                # xmlrpclib: it waits for EOF before interpreting the response).
                if ($hdr(User-Agent) =~ "xmlrpclib")
                        set_reply_close();
                set_reply_no_connect();
                dispatch_rpc();
                exit;
        }
        send_reply("403", "Forbidden");
        exit;
}
#!endif

# route to voicemail server
route[TOVOICEMAIL] {
#!ifdef WITH_VOICEMAIL
        if(!is_method("INVITE"))
                return;

        # check if VoiceMail server IP is defined
        if (strempty($sel(cfg_get.voicemail.srv_ip))) {
                xlog("SCRIPT: VoiceMail rotuing enabled but IP not defined\n");
                return;
        }
        if($avp(oexten)==$null)
                return;

        $ru = "sip:" + $avp(oexten) + "@" + $sel(cfg_get.voicemail.srv_ip)
                                + ":" + $sel(cfg_get.voicemail.srv_port);
        route(RELAY);
        exit;
#!endif

        return;
}

# manage outgoing branches
branch_route[MANAGE_BRANCH] {
        xdbg("new branch [$T_branch_idx] to $ru\n");
        route(NATMANAGE);
}

# manage incoming replies
onreply_route[MANAGE_REPLY] {
        xdbg("incoming reply\n");
        if(status=~"[12][0-9][0-9]")
                route(NATMANAGE);
}

# manage failure routing cases
failure_route[MANAGE_FAILURE] {
        route(NATMANAGE);

        if (t_is_canceled()) {
                exit;
        }

#!ifdef WITH_BLOCK3XX
        # block call redirect based on 3xx replies.
        if (t_check_status("3[0-9][0-9]")) {
                t_reply("404","Not found");
                exit;
        }
#!endif

#!ifdef WITH_VOICEMAIL
        # serial forking
        # - route to voicemail on busy or no answer (timeout)
        if (t_check_status("486|408")) {
                $du = $null;
                route(TOVOICEMAIL);
                exit;
        }
#!endif
}


#!ifdef WITH_WEBSOCKETS
onreply_route {
        if (nat_uac_test(64)) {
                # Do NAT traversal stuff for replies to a WebSocket connection
                # - even if it is not behind a NAT!
                # This won't be needed in the future if Kamailio and the
                # WebSocket client support Outbound and Path.
                add_contact_alias();
        }
}

event_route[xhttp:request] {
        set_reply_close();
        set_reply_no_connect();

        if ($Rp != MY_WS_PORT 
        
        #!ifdef WITH_TLS
              && $Rp != MY_WSS_PORT
        #!endif
       
        ) {
                xlog("L_WARN", "HTTP request received on $Rp\n");
                xhttp_reply("403", "Forbidden", "", "");
                exit;
        }

        xlog("L_DBG", "HTTP Request Received\n");

        if ($hdr(Upgrade)=~"websocket"
                        && $hdr(Connection)=~"Upgrade"
                        && $rm=~"GET") {
                xlog("L_DBG", "WebSocket\n");
                xlog("L_DBG", " Host: $hdr(Host)\n");
                xlog("L_DBG", " Origin: $hdr(Origin)\n");

                if ($hdr(Host) == $null ) {
                        xlog("L_WARN", "Bad host $hdr(Host)\n");
                        xhttp_reply("403", "Forbidden", "", "");
                        exit;
                }

                # Optional... validate Origin
                # Optional... perform HTTP authentication

                # ws_handle_handshake() exits (no further configuration file
                # processing of the request) when complete.
                if (ws_handle_handshake())
                {
                        # Optional... cache some information abou the
                        # successful connection
                        exit;
                }
        }

        xhttp_reply("404", "Not found", "", "");
}

event_route[websocket:closed] {
        xlog("L_INFO", "WebSocket connection from $si:$sp has closed\n");
}
#!endif