[Serusers] first posting, got a few problems..

To explain my situation, I've got a dual opteron 246 system with 1gig of ram and 2 80gig disks in raid1 (software raid), I'm running CentOS 4.3 x86_64 with kernel 2.6.9-34.ELsmp I'm running ser 0.9.6-6 (the -6 may just be an artifact from the fedora core rpm.. I dunno) (compiled from ser-0.9.6_src.tar.gz) Since no one seems to makes rpms for redhat or centOS (the same thing obviously) I went and made my own. I grabbed a fedora core 6 src rpm, and modified the specfile to my own liking (basically I took out the stuff related to postgres), the compile went fine, as far as I can tell, no errors were big enough to stop the compilation at least, and the rpms installed just fine. All the modules are in the right place, and my ser.cfg seems to be correct (I don't get any more errors during startup), however, I do get a segfault :( here's the attached output from /log/messages Jun 23 12:20:18 sipserver ser: Listening on Jun 23 12:20:18 sipserver ser: udp: 192.168.1.93 [192.168.1.93]:5060 Jun 23 12:20:18 sipserver ser: tcp: 192.168.1.93 [192.168.1.93]:5060 Jun 23 12:20:18 sipserver ser: Aliases: Jun 23 12:20:18 sipserver ser: tcp: pc-00093:5060 Jun 23 12:20:18 sipserver ser: udp: pc-00093:5060 Jun 23 12:20:18 sipserver ser: Jun 23 12:20:18 sipserver kernel: ser[3682]: segfault at 0000000000000000 rip 0000002a9589ef92 rsp 0000007fbffff850 error 4 Jun 23 12:20:18 sipserver ser: ser startup succeeded Obviously ser isn't running, does anyone have any idea where I can start looking to find out what dies/died/went wrong with the compile? Thanks, Nick