Re: [Serusers] presence problem

2 things....

if (method=="SUBSCRIBE" || method=="PUBLISH") { if (t_newtran()) { handle_subscription("registrar"); break; }; };

handle_subscription is for SUBSCRIBE and handle_publish is for PUBLISH, so you need 2 if, one for SUBSCRIBE method and one for PUBLISH one.

Second, after fixing this, if you have any problems, please send the msgs to see the problem

queyeah@adinet.com.uy wrote:

I read the SER presence handbook as you told me, I follow the instructions to install ser with presence modules but i receive some erros and modules wasn't installed. I go back to my old ser installation with pa module, configure some lines in ser.gfc to handle subscribe but now I'm receiving an error to SUSCRIBE and PUBLISH, it's like pa module can't process messages: Status: 400 Bad Request (ethereal)

this is my ser.cfg:

# ----------- global configuration parameters ------------------------

#debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E)

/* Uncomment these lines to enter debugging mode fork=no log_stderror=yes */

check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" fifo_mode=666

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so"

loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/textops.so"

# Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so"

#esta linea la agrego para cargar el modulo de presencia. loadmodule "/usr/lib/ser/modules/pa.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

#modparam("usrloc", "db_mode", 0) modparam("usrloc", "db_mode", 2) modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser" )

# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2)

# -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password")

# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)

# -- pa params -- modparam("pa","default_expires", 3600) modparam("pa","use_db",1) modparam("pa","db_url","mysql://ser:heslo@localhost/ser")

# ------------------------- request routing logic -------------------

# main routing logic

route{

# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); break; };

# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route();

# subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); break; };

if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); break; };

# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) {

if (method=="REGISTER") {

                   # Uncomment this if you want to use digest 

authentication if (!www_authorize("p2t.com", "subscriber")) { www_challenge("p2t.com", "0"); break; };

	save("location");
	break;
};

if (method=="SUBSCRIBE" || method=="PUBLISH") { if (t_newtran()) { handle_subscription("registrar"); break; }; };

lookup("aliases");
if (!uri==myself) {
	append_hf("P-hint: outbound alias\r\n"); 
	route(1);
	break;
};

# native SIP destinations are handled using our USRLOC DB
if (!lookup("location")) {
	sl_send_reply("404", "Not Found");
	break;
};

}; append_hf("P-hint: usrloc applied\r\n"); route(1); }

route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; }

Do you have any idea of what's happening??? Thanks again... Gustavo.

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers