[Serusers] ACC into MySQL: How to config ser to log gw messages to bill properly?

Hello guys; I have everything in place to acc into mysql. I am already logging some BYEs, INVITEs and ACKs. Where do I have to place the setflag statement to properly log messages from and/to gw 66.166.166.66 only? My ser.cfg is as follows: # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" #fifo_mode=0666 # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/acc.so" #loadmodule "/usr/local/lib/ser/modules/group.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # -- acc params -- modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser") #modparam("acc", "log_level", 1) #modparam("acc", "log_flag", 1) modparam("acc", "db_flag", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri=~"justser.com") { if (src_ip==66.166.166.66 and method=="INVITE") { ## Llamadas desde PSTN forward(uri:host, uri:port); ## break; ## }; ## if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("justser.com", "subscriber")) { www_challenge("justser.com", "0"); break; }; save("location"); break; }; if (uri=~"^sip:1305[0-9]*@justser.com") { ## prefix("3000#"); ## rewritehostport("66.166.166.66:5060"); ## TERMINATION forward(uri:host, uri:port); ## AREA CODE 305 #setflag(1); ## break; ## }; ## if (uri=~"^sip:1786[0-9]*@justser.com") { ## prefix("3000#"); ## rewritehostport("66.166.166.66:5060"); ## TERMINATION forward(uri:host, uri:port); ## AREA CODE 786 break; ## }; ## # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP setflag(1); if (!t_relay()) { sl_reply_error(); }; } Yahoo! Mail Stay connected, organized, and protected. Take the tour: http://tour.mail.yahoo.com/mailtour.html