29 May
2012
29 May
'12
1:23 p.m.
Hi Daniel/ Sammy ,
I made the changes in config as suggested (i.e. move the define variables
at the top of the file rather then in the middle)
Regarding setting debug=3 => I am setting WITH_DEBUG in the config file so
based on processing of this symbol I believe debug=4 is set.#
For the log facility in the kamailio.cfg I have set the
option log_facility=LOG_LOCAL1
& in my syslog.cfg (attached again) I have set the following
local1.* -/var/log/kamailio
but still I dont see any logs in this location when I start kamailio
I can see the kamailio process - (in total there are 19 processes here is
the root process all other are child processes of this process)
kamailio 3375 1 0 08:06 ? 00:00:00 /usr/local/sbin/kamailio -P
/var/run/kamailio.pid -m 32 -M 4 -u kamailio -g kamailio
I can also see kamailio starting to listen on port 5060 port on the local
machine on both UDP & TCP interfaces
I am using an xlite phone on windows to attempt to register - on my
Kamailio VM (using UDP) I started a tcpdump to see if I am receiving the
Register messages - I can see the register packets coming to the Kamailio
hosts from the phone - but I dont see any responses from Kamailio.
Also as there are no logs I dont know what is going wrong.
Regards,
Faisal
On Tue, May 29, 2012 at 2:37 PM, SamyGo <govoiper(a)gmail.com> wrote:
Hi Faisal,
You say you've seen packets on kamailio but kamailio isn't replying !!
1- Please verify that yuor kamailio is indeed started *[ps -ef | grep
kamailio]*
2- Verify if kamailio is actuallay listening on the same port as you
are sending pcakets to ! *[netstat -pln|grep kamailio]*
3- Verify if your kamailio is using the same protocol as of your client
i.e TCP or UDP or TLS etc.
4- instead of viewing the file* /var/log/kamailio* see* /var/log/messages
*because you haven't mentioned local7 as Log facility in your config.
I don't see your syslog*.conf * file in this mail! check that file and
follow the referenced
link<http://www.kamailio.org/dokuwiki/doku.php/utils:basic-syslog-config…
completely.
Also see your configurations kamailio.cfg file and use define tags from
second line from top onward i.e just after #!KAMAILIO.
Try getting rid of the comment line "*####### Defined Values #########*"
- in my experience such comment before define cause trouble with
configurations.
See all these and then reply with updates.
Regards,
Sammy G.
On Tue, May 29, 2012 at 2:18 PM, Daniel-Constantin Mierla <
miconda(a)gmail.com> wrote:
Hello,
you can set debug=3 in kamailio config to see very verbose debug
messages. If you don't get any, means the request does not reach the
application layer, meaning you have a firewall in place that drops the
packets from the network.
Cheers,
Daniel
On 5/29/12 8:02 AM, Faisal Yousuf wrote:
Hi Experts,
I am a newbee with SIP-Router/Kamailio - I installed Kamailio on a CentOS
5.5 VM - following the instructions from the following link
http://kb.asipto.com/kamailio:install:3.0.x-from-git-centos5x
Kamailio is installed & I can start kamailio deamon from service
kamailio start
However I also created two subscribers - but when I try to register my
SIP Phone (by setting Kamailio as the domain to register to) - I can see my
sip-phone sending the Register request to Kamailio (I put a tcpdump on the
kamailio machine to see sip-messages reaching the host) but I dont get any
response from Kamailio - so my sip phone reaches the 408 Registeration
Timeout state.
Now, I dont get any logs from Kamailio to know what is happening while
my phone is sending the register request - I tried to configure logging
following instructions from the following link
http://www.kamailio.org/dokuwiki/doku.php/utils:basic-syslog-configuration
But I dont get any logs in the /var/log/kamailio log file.
To assist in understanding the issue - I am attaching the syslog config
, kamailio config file & the kamailio service script in the init.d folder.
My first objective will be to enable logging for kamailio & the next
objective is to get the basic registration & routing between endpoints - my
ultimate objective is to configure SER/Kamailio as a load-balancer for our
B2BUA & Media Servers (I found the dispatcher module can help in
accomplishing this) - Can anybody help me in identifying why I am not
getting any logs ?
I have already seen the wiki & have developed some understanding
regarding how Kamailio is configured but am I seeking more information
regarding the route language - (the state-model + reference of the
functions that can be used in the route script etc.) - in this regards if I
can get any documentation pointers from the user community that can help me
gain a better understanding the use of Kamailio for above it will be great
Regards,
Faisal
Regards,
Faisal
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda -
http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Seattle, USA, Sep 23-26, 2012 - http://asipto.com/u/katu
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users