21 Oct
2013
21 Oct
'13
11:20 p.m.
Yes
If either of the t_next_contacts are executed, they fail.
If they are removed from the routing logic, the calls are completing, but
not reliably as, as the least, some SIP packets like BYE are being dropped.
here is a snippet:
$avp(oexten) = $rU;
if (!lookup("location")) {
$var(rc) = $rc;
route(TOVOICEMAIL);
t_newtran();
switch ($var(rc)) {
case -1:
case -3:
send_reply("404", "2 Not Found");
exit;
case -2:
send_reply("405", "Method Not
Allowed");
exit;
}
}
if (!t_load_contacts()) {
send_reply("500", "1 Server Internal Error");
exit;
}
if (!t_next_contacts()) {
send_reply("500", "2 Server Internal Error");
exit;
}
t_on_failure("FAIL_OUTBOUND");
and another
# manage failure routing cases
failure_route[FAIL_OUTBOUND] {
if (t_check_status("408|430")) {
if (!t_next_contact_flows() && !t_next_contacts()) {
send_reply("500", "3 Server Internal Error");
exit;
}
} else if (!t_next_contacts()) {
send_reply("500", "4 Server Internal Error");
exit;
}
t_on_failure("FAIL_OUTBOUND");
route(RELAY);
}
Thanks!
- Coy
On Mon, Oct 21, 2013 at 3:17 PM, Daniel-Constantin Mierla <miconda(a)gmail.com
wrote:
Hello,
before using t_load_contacts()/t_next_contacts(), you have to use
lookup("location");
Do you have that one, too?
Cheers,
Daniel
On 10/17/13 11:40 PM, Coy Cardwell wrote:
Hello again.
Compiling from source, using the proxy-to-central registrar
configurations outlined here
http://www.kamailio.org/docs/modules/4.0.x/modules/outbound.html and
adding in the additional "append_hf("Supported: path,
outbound\r\n");" on
the proxy, registration works.
However, when a call is made, the debug traces show problems when
entering this area of the configuration outlined in the Outbound Module:
if (!t_load_contacts()) {
send_reply("500", "Server Internal Error");
exit;
}
if (!t_next_contacts()) {
send_reply("500", "Server Internal Error");
exit;
}
as shown here:
1(26960) ERROR: *** cfgtrace: c=[//etc/kamailio/kamailio.cfg] l=700 a=16
n=if
1(26960) ERROR: *** cfgtrace: c=[//etc/kamailio/kamailio.cfg] l=695 a=24
n=t_load_contacts
1(26960) DEBUG: tm [t_serial.c:166]: t_load_contacts(): nr_branches is 0
1(26960) DEBUG: tm [t_serial.c:169]: t_load_contacts(): nothing to do -
only one contact!
1(26960) ERROR: *** cfgtrace: c=[//etc/kamailio/kamailio.cfg] l=705 a=16
n=if
1(26960) ERROR: *** cfgtrace: c=[//etc/kamailio/kamailio.cfg] l=700 a=24
n=t_next_contacts
1(26960) DEBUG: tm [t_serial.c:376]: t_next_contacts(): no contacts in
contacts_avp - we are done!
1(26960) ERROR: *** cfgtrace: c=[//etc/kamailio/kamailio.cfg] l=701 a=26
n=send_reply
The result from t_load_contacts seems to imply one contact exists, which
would be correct as there should be one, but then t_next_contacts sees no
cotacts and the sever returns an error, breaking the call.
Any ideas?
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda -
http://www.linkedin.com/in/miconda
Kamailio Advanced Trainings - Berlin, Nov 25-28; Miami, Nov 18-20, 2013
- more details about Kamailio trainings at http://www.asipto.com -
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users