7 Nov
2014
7 Nov
'14
6:02 p.m.
Hi all
I'm experiencing a problem while using a mobile client on a NGCP mr3.5.1 (based
on kamailio 4.1.6)
The problem is as follows:
A custom mobile client
B blink for linux
The path of a call from B to A would be this one:
B --> Kamailio LB --> Kamailio proxy --> Sems --> Kamailio LB --> A
Kamailio LB is a stateless proxy. Kamailio proxy is a stateful proxy and
registrar and sems acts as B2BUA.
Kamailio LB listens tcp,udp and tls to the outside and speaks udp to the
inside.
Kamailio proxy and sems only listen udp localhost (ports 5062 ans 5080).
My problem comes when the ACK from B to A (to the INVITE-200) doesn't leave the
Kamailio LB to the proxy. The problem is that the kamailio proxy added itself
as sips in the record-route header:
U 2014/11/06 19:22:20.447717 127.0.0.1:5062 -> 127.0.0.1:5080
INVITE sips:test1@10.0.1.5:41956;rinstance=145658D8;transport=tcp SIP/2.0'
Record-Route:
<sips:127.0.0.1:5062;lr=on;ftag=3Kwc9Aj.elAwdwWtB5yAXqdxR8rsyWi3;did=3e6.48e1;mpd=ii;ice_caller=strip;ice_callee=strip;aset=50;rtpprx=yes;vsf=aHRBd2tQQ3VhVkZGamdrN2lhanhodEF3aw-->'
Record-Route:
<sip:127.0.0.1;r2=on;lr=on;ftag=3Kwc9Aj.elAwdwWtB5yAXqdxR8rsyWi3;nat=yes;ngcplb=yes;socket=udp:XX.XX.XX.XX:5060>'
Record-Route:
<sip:XX.XX.XX.XX;r2=on;lr=on;ftag=3Kwc9Aj.elAwdwWtB5yAXqdxR8rsyWi3;nat=yes;ngcplb=yes;socket=udp:XX.XX.XX.XX:5060>'
Via: SIP/2.0/UDP
127.0.0.1:5062;branch=z9hG4bKc36a.b42be7e4a4db27ac699a52fda7fb5fe0.0' Route:
<sip:lb@127.0.0.1;lr;received=sip:YY.YY.YY.YY:41956%3Btransport%3Dtls;socket=sip:XX.XX.XX.XX:5061>'
Via: SIP/2.0/UDP
127.0.0.1;branch=z9hG4bKc36a.a58b9955ce93726b17c0240a555011f2.0'
Via: SIP/2.0/UDP
10.10.10.4:47879;received=ZZ.ZZ.ZZ.ZZ;rport=47879;branch=z9hG4bKPj6UmIovzyxDRCgcuz-VoXHEyJHRpA712x'
When the ACK arrives to the LB from B, it can't relay it to the Kamailio proxy:
NOTICE: <script>: New request on lb - M=ACK
R=sip:ngcp-lb@XX.XX.XX.XX;ngcpct=7369703a3132372e302e302e313a353038303b707278726f7574653d31
NOTICE: <script>: Relaying request,
du='sips:127.0.0.1:5062;lr;ftag=3Kwc9Aj.elAwdwWtB5yAXqdxR8rsyWi3;did=3e6.48e1;mpd=ii;ice_caller=strip;ice_callee=strip;aset=50;rtpprx=yes;vsf=aHRBd2tQQ3VhVkZGamdrN2lhanhodEF3aw--',
fs='udp:127.0.0.1:5060' - R=sip:127.0.0.1:5080;prxroute=1
WARNING:
<core> [forward.c:264]: get_send_socket2(): WARNING: get_send_socket:
protocol/port mismatch (forced udp:127.0.0.1:5060, to tls:127.0.0.1:5062)
I think the problem might be in the way the client registers? This is the
registration info where it uses sips in the contact:
contact: sips:test1@10.0.1.5:41956;rinstance=145658D8;transport=tcp
If I try the same calling blink, which has the following contact in the
registration it works without issues as the proxy doesn't insert sips in the
Record-Route header:
contact: sip:91807432@10.10.10.4:57160;transport=tls
Any thoughts?
cheers,
Jon