27 Nov
2007
27 Nov
'07
9:58 a.m.
You use usrloc-cl?
If not, unless you replicate, the non-REGISTER handling server will not
have the usrloc in memory.
g-)
Tomasz Zieleniewski wrote:
Hi Jiri,
On Nov 25, 2007 10:08 PM, Jiri Kuthan <jiri(a)iptel.org> wrote:
At 10:56 25/11/2007, Tomasz Zieleniewski wrote:
Boundary proxy uses usrloc only for the purpose of pinging the natted users.
Nathelper module requires usrloc. Because all reuqest travels 'boundary proxy'
before entering network the 'boundary proxy' must ping users to keep
my nat bindings
right. they are both on seperate machines.
-tomek
Hi,
I don't have those lines because I have a registrar on seperate SIP Proxy.
This proxy here is the boundary one, but they both use the same database
and have access to location table common.
Well, I'm not sure I'm getting the context of this configuration so
I don't
feel certain with providing some hints (in particular two proxy serveer
in a series both using usrloc seems unusual to me). A hand-waving estimate
is you need to configure the "boundary proxy" to change all natted clients
to form "as seen by the network" and the "actual proxy" to send pings
to
all contacts.
-jiri
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
-tomasz
On Nov 25, 2007 10:40 AM, Jiri Kuthan <jiri(a)iptel.org> wrote:
--
Jiri Kuthan http://iptel.org/~jiri/
Hi Tomasz,
well it could be that reusing an existing config and commiting than your specific
changes to it would save you quite some laborous exercises rather than writing
it from scratch....
http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/sip_router/etc/ser-oob.cfg?re…
The lines in question are (out of which I think you are missing the registrar params)
FLAG_NAT : 3, # the UAC is behind a NAT
...
# identify natted contacts using a flag
modparam("registrar", "load_nat_flag", "FLAG_NAT")
modparam("registrar", "save_nat_flag", "FLAG_NAT")
...
modparam("rr", "cookie_filter", "(account|uac_nat)")
...
modparam("nathelper", "ping_nated_only", 1 )
# if this option is not set, simple 4-bytes ping is sent
modparam("nathelper", "natping_method", "OPTIONS" )
#temporary statefull natping test (only in future versions)
#modparam("nathelper", "natping_stateful", 1)
...
setflag(FLAG_NAT);
-jiri
At 22:20 24/11/2007, Tomasz Zieleniewski wrote:
> I'm sorry for the CC
> here is my config:
>
> debug=3 # debug level (cmd line: -dddddddddd)
> memdbg=5
> memlog=5
> log_facility=LOG_LOCAL0
> fork=yes
> log_stderror=no
> check_via=yes # (cmd. line: -v)
> dns=no # (cmd. line: -r)
> rev_dns=no # (cmd. line: -R)
> port=5060
> tls_port_no=5061
> children=4
> user=ser
> group=ser
> mhomed=yes
> disable_tcp=no
> tcp_accept_aliases=yes
> enable_tls=no
> sip_warning=0
> reply_to_via=no
> alias="voip.touk.pl"
>
> dns_retr_time=1
> dns_retr_no=1
> dns_servers_no=1
> dns_use_search_list=no
> dns_try_ipv6=no
> # dns cache & failover
> use_dns_cache=on
> use_dns_failover=on
> # dns_cache_flags=0
> dns_cache_negative_ttl=300
> dns_cache_min_ttl=60
> dns_cache_max_ttl=86400 # 1 day
> dns_cache_mem=2048 # 2 MB
> dns_cache_gc_interval=60
>
> tcp_connection_lifetime=3600
> tcp_max_connections=2048
> tcp_connect_timeout=1
>
> loadmodule ...
> ....
>
> # specify the path to you database here
>
modparam("acc_db|auth_db|avp_db|domain|gflags|usrloc|uri_db|speeddial|msilo|lcr",
> "db_url", "mysql://ser:ser@localhost/ser")
>
> # -- usrloc params --
> modparam("usrloc", "db_mode", 1)
>
> # -- registrar params --
> modparam("registrar", "default_expires", 300)
> modparam("registrar", "min_expires", 60)
> modparam("registrar", "max_expires", 300)
> modparam("registrar", "append_branches", 1)
> modparam("registrar", "received_param", "rcv")
> modparam("registrar", "max_contacts", 2)
>
> # -- auth params --
> modparam("auth_db", "calculate_ha1", yes)
> modparam("auth_db", "password_column", "password")
>
> # -- rr params --
> modparam("rr", "enable_full_lr", 1)
> modparam("rr", "cookie_filter", "uac_nat")
> modparam("rr", "cookie_secret", "secret")
> modparam("rr", "user_part_avp", "route_user")
> modparam("rr", "next_route_avp", "route_next")
>
> # -- gflags params --
> modparam("gflags", "load_global_attrs", 1)
>
> # -- domain params --
> modparam("domain", "load_domain_attrs", 1)
>
> # -- ctl params --
> modparam("ctl", "binrpc", "unixs:/tmp/ser-bsp_ctl")
> modparam("ctl", "fifo", "fifo:/tmp/ser-bsp_fifo")
> # modparam("ctl", "binrpc", "tcp:localhost:2046")
> modparam("ctl", "mode", 0777)
>
> # -- tm params --
> modparam("tm", "restart_fr_on_each_reply", 1)
>
> # -- auth_radius params --
> modparam("auth_radius", "radius_config",
> "/usr/local/etc/radiusclient-ng/radiusclient.conf")
> modparam("auth_radius", "service_type", 15)
>
> # -- options params --
> modparam("options", "accept", "*/*")
> modparam("options", "accept_encoding", "")
> modparam("options", "accept_language", "en")
>
> # -- ratelimit params --
> modparam("ratelimit","timer_interval", 10)
> modparam("ratelimit","invite_limit", 100)
> modparam("ratelimit","register_limit", 100)
> modparam("ratelimit","subscribe_limit", 100)
>
> # -- xmlrpc params --
> modparam("xmlrpc", "route","RPC")
>
> # -- nathelper params --
> modparam("nathelper", "natping_interval", 20)
> modparam("nathelper", "ping_nated_only", 0)
> modparam("nathelper", "rtpproxy_disable", 1)
> modparam("nathelper", "tcpping_crlf", 1)
>
> # -- tls params --
> modparam("tls", "config",
"/home/ser/ser/ca/tls-bsp.cfg")
> modparam("tls", "tls_force_run", 0)
> modparam("tls", "tls_log",3)
> modparam("tls", "handshake_timeout", 10)
> modparam("tls", "send_timeout", 10)
> modparam("tls", "tls_disable_compression", 0)
> #modparam("tls", "private_key", "/etc/certs/key.pem")
> #modparam("tls", "certificate", "/etc/certs/cert.pem")
> #modparam("tls", "ca_list", "/etc/certs/ca_list.pem")
> #modparam("tls", "require_certificate", 0)
> #modparam("tls", "verify_certificate", 1)
> #modparam("tls", "tls_method", "TLSv1")
>
> route{
> ...
> }
>
> On Nov 24, 2007 9:35 PM, Atle Samuelsen <clona(a)cyberhouse.no> wrote:
>
>> Hi,
>>
>> Always CC the list.
>>
>> then I dont know.. post your full config so people can see if they see
>> something
>> -A
>>
>> * Tomasz Zieleniewski <tzieleniewski(a)gmail.com> [071124 20:38]:
>>
>>
>>> Hi,
>>>
>>> I had that parameter set to 0, but still no udp packets...
>>>
>>> On Nov 24, 2007 6:43 PM, Atle Samuelsen <clona(a)cyberhouse.no> wrote:
>>>
>>>> * Tomasz Zieleniewski <tzieleniewski(a)gmail.com> [071124 16:50]:
>>>>
>>>>
>>>>> HI,
>>>>>
>>>>> I have the following nathelper settings:
>>>>> modparam("nathelper", "natping_interval", 20)
>>>>> modparam("nathelper", "ping_nated_only", 1)
>>>>> modparam("nathelper", "rtpproxy_disable", 1)
>>>>> modparam("nathelper", "tcpping_crlf", 1)
>>>>>
>>>>> But i cant see any udp packets being sent to registered users.
>>>>> Please point me what did I miss.
>>>>>
>>>> Hi,
>>>>
>>>> without seeing any more of your config, I'm guessing that you do not
set
>>>> the natflag, so if you change ping_nated_only to 0, I think you will see
>>>> some udp packets.
>>>>
>>>> - Atle
>>>> (shot in the whild world of sip)
>>>>
>>>>
>>>>
>>>>> Best
>>>>> Tomasz
>>>>> _______________________________________________
>>>>> Serusers mailing list
>>>>> Serusers(a)lists.iptel.org
>>>>> http://lists.iptel.org/mailman/listinfo/serusers
>>>>>
> _______________________________________________
> Serusers mailing list
> Serusers(a)lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>
--
Jiri Kuthan http://iptel.org/~jiri/
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers