Are there any error messages in ser logs ?
Jan.
On 07-06 13:14, Rafael J. Risco G.V. wrote:
hello
I?m still having problems with radius accounting module, ...I can see that authentication process works well but I did not see any "Accounting Report" in /var/log/radius/radacct/ or neither in radiusd -X debug , please can someone share an example of its ser.cfg file for this function?
thanks Rafael
PS: my current ser.cfg configuration is shown below, freeradius it?s installed in the same host (SuSe Linux 9.0) and I have included setflag(1) for all transactions as Klaus D. recommend me some days ago...
ser:/var/log/radius/radacct# more /etc/ser/ser.cfg
# simple quick-start config script #
# ----------- global configuration parameters ------------------------
#debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E)
#/* Uncomment these lines to enter debugging mode debug=9 fork=yes log_stderror=yes #*/
check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database #loadmodule "//lib/ser/modules/mysql.so"
loadmodule "//lib/ser/modules/sl.so" loadmodule "//lib/ser/modules/tm.so" loadmodule "//lib/ser/modules/rr.so" loadmodule "//lib/ser/modules/maxfwd.so" loadmodule "//lib/ser/modules/usrloc.so" loadmodule "//lib/ser/modules/registrar.so" loadmodule "//lib/ser/modules/group_radius.so" #loadmodule "//lib/ser/modules/group.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "//lib/ser/modules/auth.so" #loadmodule "//lib/ser/modules/auth_db.so" loadmodule "//lib/ser/modules/auth_radius.so" loadmodule "//lib/ser/modules/acc.so" #loadmodule "//lib/ser/modules/uri.so" # ----------------- setting module-specific parameters ---------------
# -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1) modparam("auth_radius","radius_config","/etc/radiusclient/radiusclient.conf") modparam("auth_radius","service_type",15) modparam("acc", "log_level", 1) modparam("acc", "radius_config","/etc/radiusclient/radiusclient.conf") modparam("acc", "service_type", 15) modparam("acc", "radius_flag", 1) modparam("acc", "radius_missed_flag", 3)
# ------------------------- request routing logic -------------------
# main routing logic
route{
setflag(1); if (method=="REGISTER") log(1, "REGISTER message received\n");
if (method=="INVITE") log(1, "INVITE message received\n"); if (method=="ACK") log(1, "ACK message received\n"); if (method=="BYE") log(1, "BYE message received\n"); if (method=="CANCEL") log(1, "CANCEL message received\n"); if (method=="SUBSCRIBE") log(1, "SUBSCRIBE message received\n"); if (method=="NOTIFY") log(1, "NOTIFY message received\n"); if (method=="OPTIONS") log(1, "OPTIONS message received\n"); if (method=="INFO") log(1, "INFO message received\n"); if (method=="MESSAGE") log(1, "MESSAGE message received\n"); if (method=="REFER") log(1, "REFER message received\n"); # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") {# Uncomment this if you want to use digest authentication if (!radius_www_authorize("")) { www_challenge("", "1"); break; };
save("location"); break; };#Labeled transactions for accounting #if (method =="INVITE" | method == "BYE") # { # log(1,"INVITE or BYE\n"); # setflag(1); # }; #if (method=="MESSAGE") { # log(1,"MESSAGE\n"); # setflag(1); # }; #if (method=="BYE"){ # log (1, "BYEd or CANCEL\n"); # setflag(1); # }; #if (method=="CANCEL"){ # log (1, "BYEe or CANCEL\n"); # setflag(1); # };
# native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); };}
ser:/var/log/radius/radacct #
[Serusers] Still trying to get radius Accounting!!!!!!!!!!
Klaus Darilion klaus.mailinglists@pernau.at escribi?:
try setflag(1); for the transactions you want to account!
klaus
Rafael J. Risco G.V. wrote:
hello serusers! I have followed these instructions carefully
again(http://iptel.org/ser/doc/ser_radius/ser_radius.html) and now I can see that authentication process works well but I did not see any "Accounting Report" in /var/log/radius/radacct/ or neither in radiusd -X debug, please can someone send me an example of ser.cfg configuration for this purpose?
thanks Rafael
PS: my current ser.cfg configuration is shown below, freeradius it is
installed in the same host (SuSe Linux 9.0):
ser:/var/log/radius/radacct # more /etc/ser/ser.cfg # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script #
# ----------- global configuration parameters
#debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E)
#/* Uncomment these lines to enter debugging mode debug=9 fork=yes log_stderror=yes #*/
check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo"
# ------------------ module loading
# Uncomment this if you want to use SQL database #loadmodule "//lib/ser/modules/mysql.so"
loadmodule "//lib/ser/modules/sl.so" loadmodule "//lib/ser/modules/tm.so" loadmodule "//lib/ser/modules/rr.so" loadmodule "//lib/ser/modules/maxfwd.so" loadmodule "//lib/ser/modules/usrloc.so" loadmodule "//lib/ser/modules/registrar.so" loadmodule "//lib/ser/modules/group_radius.so"
#loadmodule "//lib/ser/modules/group.so" # Uncomment this if you want digest authentication # mysql.so must be loaded !
loadmodule "//lib/ser/modules/auth.so"
#loadmodule "//lib/ser/modules/auth_db.so"
loadmodule "//lib/ser/modules/auth_radius.so" loadmodule "//lib/ser/modules/acc.so"
#loadmodule "//lib/ser/modules/uri.so"
# ----------------- setting module-specific parameters
# -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this
config),
# uncomment also the following parameter) # #modparam("auth_db", "password_column", "password")
# -- rr params -- # add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
modparam("auth_radius","radius_config","/etc/radiusclient/radiusclient.conf")
modparam("auth_radius","service_type",15) modparam("acc",
"radius_config","/etc/radiusclient/radiusclient.conf")
modparam("acc", "service_type", 15) modparam("acc", "radius_flag", 1) modparam("acc", "radius_missed_flag", 3)
# ------------------------- request routing logic
# main routing logic
route{
# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") {# Uncomment this if you want to use digest authentication if (!radius_www_authorize("")) { www_challenge("", "0"); break; };
save("location"); break; }; # native SIP destinations are handled using our USRLOCDB
if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); };} ser:/var/log/radius/radacct #
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers