[Users] Accounting Stop time is not inserting in radacct tables in Radius by using openser

Hi please this Issuse ....... Radius server debug mode....... rad_recv: Accounting-Request packet from host 192.168.2.55:32807, id=58, length=221 Acct-Status-Type = Failed Service-Type = IAPP-AP-Check Sip-Response-Code = 0 Sip-Method = INVITE User-Name = "555@192.168.2.55<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=69#Compose> " Calling-Station-Id = "sip:555@192.168.2.55<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=69#Compose> " Called-Station-Id = "sip:666@192.168.2.55<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=69#Compose> " Sip-Translated-Request-URI = "sip:666@192.168.2.55<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=69#Compose> " Acct-Session-Id = "E54D81BC-C463-446F-B0AF-DE1C3C6EC33D@192.168.2.21<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=69#Compose> " Sip-To-Tag = "n/a" Sip-From-Tag = "3693743074" Sip-Cseq = "34571" NAS-Port = 5060 Acct-Delay-Time = 0 NAS-IP-Address = 192.168.2.55 Processing the preacct section of radiusd.conf modcall: entering group preacct for request 11 modcall[preacct]: module "preprocess" returns noop for request 11 rlm_realm: Looking up realm "192.168.2.55" for User-Name = "555@192.168.2.55<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=69#Compose> " rlm_realm: No such realm "192.168.2.55" modcall[preacct]: module "suffix" returns noop for request 11 modcall: leaving group preacct (returns noop) for request 11 Processing the accounting section of radiusd.conf modcall: entering group accounting for request 11 rlm_acct_unique: Hashing 'NAS-Port = 5060,Client-IP-Address = 192.168.2.55,NAS-IP-Address = 192.168.2.55,Acct-Session-Id = "E54D81BC-C463-446F-B0AF-DE1C3C6EC33D@192.168.2.21<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=69#Compose>",User-Name = "555@192.168.2.55<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=69#Compose> "' rlm_acct_unique: Acct-Unique-Session-ID = "ef0513de749b7034". modcall[accounting]: module "acct_unique" returns ok for request 11 radius_xlat: '/usr/local/var/log/radius/radacct/192.168.2.55/detail-20060605' rlm_detail: /usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/192.168.2.55/detail-20060605 rlm_detail: Failed to create directory /usr/local/var/log/radius/radacct/192.168.2.55: Permission denied modcall[accounting]: module "detail" returns fail for request 11 modcall: leaving group accounting (returns fail) for request 11 Finished request 11 Going to the next request Below one is openser.cfg file please help me #************************************************************************************************* modparam("usrloc", "db_mode", 2) modparam("auth_db", "password_column", "password") modparam("auth_db", "calculate_ha1", yes) modparam("usrloc|acc|auth_db|group|msilo", "db_url", "mysql://openser:openserrw@localhost/openser") ########333333 modparam("acc","log_level",1) modparam("acc","log_flag",1) modparam("acc","log_missed_flag",2) modparam("acc", "log_fmt", "cdfimorstup") modparam("acc", "failed_transaction_flag",3) modparam("acc", "report_cancels", 1) modparam("acc","report_ack",0) modparam("acc", "db_flag", 1) modparam("acc", "db_missed_flag", 2) modparam("acc","radius_flag",1) modparam("acc","radius_missed_flag",2) modparam("acc","service_type",16) modparam("acc","radius_config","/usr/local/etc/radiusclient-ng/radiusclient.conf") ##########33 modparam("nathelper","natping_interval",30) modparam("nathelper","ping_nated_only",1) modparam("nathelper", "rtpproxy_sock", "unix:/var/run/rtpproxy.sock") #################33 modparam("rr", "enable_full_lr", 1) ############################################### route { # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("13")) { sl_send_reply("483","Too Many Hops........................!"); exit; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); exit; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); setflag(1); exit; }; # account completed transactions via syslog setflag(1); setflag(2); if(uri==myself) { if(method=="REGISTER") { if(!radius_www_authorize("192.168.2.55")) { www_challenge("192.168.2.55","1"); exit; }; save("location"); if (m_dump()) { log("MSILO: offline messages dumped - if they were\n"); }else{ log("MSILO: no offline messages dumped\n"); }; exit; }; if(method=="INVITE"|| method=="ACK") { acc_rad_request("Start"); record_route(); force_rtp_proxy(); #setflag(1); t_on_reply("1"); }; if (method=="BYE") { record_route(); }; if (method=="MESSAGE") { log(1, "MESSAGE\n"); setflag(1); /* set for accounting (the same value as in log_flag!) */ }; if (method=="BYE" || method=="CANCEL") { #log (1, "BYE or CANCEL\n"); #setflag(1); acc_rad_request("Stop"); setflag(1); }; if(!lookup("location")) { sl_send_reply("404","Woo......... NOt found"); }; }; lookup("aliases"); setflag(2); if(!t_relay()) { sl_reply_error(); }; } onreply_route[1] { if(status=~"[0-9][0-9][0-9]") { force_rtp_proxy(); }; } ....................... Naslist file in raddb(radius_server..... 192.168.2.55 radiustest other 192.168.2.20 hyperion1 other 192.168.2.21 hyperion2 other .........................hintsGroups.......... 555@192.168.2.55<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=69#Compose> NAS-IP-ADDRESS == 192.168.2.21 666@192.168.2.55<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=69#Compose> NAS-IP-ADDRESS == 192.168.2.20 ...................................... .................radiusclient.conf ........ authserver 192.168.2.55 acctserver 192.168.2.55 ......................servers.................. 192.168.2.55 radiustest 192.168.2.20 hyperion1 192.168.2.21 hyperion2 ...................Radacct tables.......... id UserName Attribute op value --------------------------------------------------- 4 555@192.168.2.55<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=69#Compose> Password == test2 5 666@192.168.2.55<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=69#Compose> Password == test3 -------------------------------------------------------- RadgroupCheck...... id GroupName Attribute op value 5 voip Auth-Type := Digest ************************************************************ RadgroupReply... id GroupName Attribute op Value 56 voip Service-Type := Sip-Session ............................................................ UserGroup UserName Group Priority 555@192.168.2.55<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=69#Compose> Voip 4 666@192.168.2.55<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=69#Compose> voip 5 ---------------------------------------------------------- -- Thanks and Regards with cheers Sunkara Ravi Prakash (Voip Developer) Hyperion Technology www.hyperion-tech.com <b>