5 Sep
2006
5 Sep
'06
7:41 a.m.
Hi,
I have problem with radius accounting.
I'm using openser1.0.1 and bsdradius 0.6.0
I'd like to send Accounting-Start packet on INVITE and ACK messages,
And i would like to differentiate it.
I'd like to use Sip-Method radius attribute for this, but it doesn't work
I've added the following lines to the dictionary of radiusclient-ng
### Sip-Method Values ###
VALUE Sip-Method INVITE 1 # Proprietary, acc
VALUE Sip-Method CANCEL 2 # Proprietary, acc
VALUE Sip-Method ACK 4 # Proprietary, acc
VALUE Sip-Method BYE 8 # Proprietary, acc
in openser.cfg the lines in question are:
modparam("acc", "radius_extra",
"Sip-Method-Str=$avp(s:method)")
route {
#....
# set Sip-Method for accounting
if (is_method("INVITE")) {
avp_printf("s:method", "1");
}
else if (is_method("ACK")) {
avp_printf("s:method", "4");
}
else if (is_method("BYE")) {
avp_printf("s:method", "8");
};
#....
}
But i've a more serious problem:
In radius i receive accounting packets for INVITE and ACK in the same time.
I'd like to use INVITE for set setuptime,
and ACK to set conncettime of a call.
But in this way the setuptime is incorrect..
INVITE:
[2006-09-05 13:41:37]
--AcctPacket--------------------------------------------------
'NAS-IP-Address': '127.0.0.1'
'User-Name': '222@callshop'
'Acct-Status-Type': 'Start'
'Error-Cause': 1L
'Acct-Delay-Time': 0L
'Called-Station-Id': 'sip:22@192.168.1.8'
'Client-IP-Address': '127.0.0.1'
'Acct-Session-Id': '6PvDX6sDfK3ndBxl(a)192.168.1.129'
'Sip-Translated-Request-URI': 'sip:222@192.168.1.10'
'Service-Type': 'IAPP-Register'
'Sip-Cseq': '2'
'Sip-From-Tag': 'fTgBvqElrM7eckW6'
'Sip-Src-Port': '5061'
'Sip-To-Tag': 'as797c64fb'
'Sip-Response-Code': 200L
'Sip-Src-IP': '192.168.1.129'
'Calling-Station-Id': 'sip:222@192.168.1.8'
'NAS-Port': 5060L
ACK
[2006-09-05 13:41:37]
--AcctPacket--------------------------------------------------
'NAS-IP-Address': '127.0.0.1'
'User-Name': '222(a)192.168.1.8'
'Acct-Status-Type': 'Start'
'Error-Cause': 4L
'Acct-Delay-Time': 0L
'Called-Station-Id': 'sip:22@192.168.1.8'
'Client-IP-Address': '127.0.0.1'
'Acct-Session-Id': '6PvDX6sDfK3ndBxl(a)192.168.1.129'
'Sip-Translated-Request-URI': 'sip:222@192.168.1.10'
'Service-Type': 'IAPP-Register'
'Sip-Cseq': '2'
'Sip-From-Tag': 'fTgBvqElrM7eckW6'
'Sip-Src-Port': '5061'
'Sip-To-Tag': 'as797c64fb'
'Sip-Response-Code': 200L
'Sip-Src-IP': '192.168.1.129'
'Calling-Station-Id': 'sip:222@192.168.1.8'
'NAS-Port': 5060L
When are INVITE messages sent to radius?
When openser got an INVITE message? I think should be...
Or when the session is establised?
Thanks any help,
Tamas