10 Jul
2003
10 Jul
'03
3:37 p.m.
Try to disable VAD (aka silence surpression or compression) in Nortel if
it supports that, it might help.
-Maxim
Ricardo Villa wrote:
Hi Maxim,
UA1 is the Nortel Networks SIP Client. I did not put it behind a NAT so as
to avoid any issues. But I followed your suggestion and swapped it for
another ATA186. It seems to work fine now. Made about 20 calls and all had
fine audio. Any ideas why other UAs can have problems even though they are
not behind a NAT??
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
From my observations of the rtpproxy output, I
notice that when the call is
successfull I see these two lines:
addr1 filled in
addr2 filled in
But when there is no audio I only see:
addr1 filled in
By the way we mainly use ATA186s on our network but there are a handul of
others that should coexist if we were to deply the RTPProxy.
Thanks,
Ricardo
----- Original Message -----
From: "Maxim Sobolev" <sobomax(a)portaone.com>
To: "Ricardo Villa" <ricvil(a)epm.net.co>
Cc: <serdev(a)lists.iptel.org>rg>; <serusers(a)lists.iptel.org>
Sent: Wednesday, July 09, 2003 8:11 PM
Subject: Re: [Serusers] nathelper updated to support RTP proxy
Oh, sorry, I've misunderstood your problem.
What kind of device UA1 is?
Can you please try the same with ATAs on both ends?
-Maxim
Ricardo Villa wrote:
>Hi Maxim,
>
>Sorry but I don't understand what you mean. Ser and RTP Proxy are on a
>machine with IP Address=192.168.1.111. The WAN interface of the NAT
Router
>is 192.168.1.1. What exactly should I do?
>
>
UA1---SER(192.168.1.111)---(192.168.1.1)NAT(192.168.0.1)----ATA186(192.168.0
.15)
Thanks,
Ricardo
----- Original Message -----
From: "Maxim Sobolev" <sobomax(a)portaone.com>
To: "Ricardo Villa" <ricvil(a)epm.net.co>
Cc: <serusers(a)lists.iptel.org>rg>; <serdev(a)lists.iptel.org>
Sent: Wednesday, July 09, 2003 7:18 PM
Subject: Re: [Serusers] nathelper updated to support RTP proxy
Try to bind both ser and rtpproxy to the IP
address of "WAN" interface -
192.168.0.1 and let me know if it helps or not.
-Maxim
Ricardo Villa wrote:
>Hi Maxim,
>
>I have tested on 0.8.12dev-t10 installed on RedHat 7.3.
>
>The results are mixed. Only about 40% of the calls have audio even
though
>>the SDP is rewritten properly.
>>
>>My test setup is like this:
>>
>>UA1(192.168.1.10) --
>SER(192.168.1.111)---(192.168.1.1)NAT(192.168.0.1)--ATA186(192.168.0.15)
>
>>I have included the "-f" output from the rtpproxy plus 4 ngrep files.
>>
>>1. success_from_internet.txt --> good call from UA1 to ATA186
>>2. fail_from_internet.txt ---> no audio call from UA1 to ATA186
>>3. success_from_nat.txt ----> good call from ATA186 to UA1
>>4. fail_from_nat.txt ---> no audio call from ATA186 to UA1
>>
>>Please let me know how else we can troubleshoot this.
>>
>>Thanks,
>>Ricardo
>>
>>
>>
>>----- Original Message -----
>>From: "Maxim Sobolev" <sobomax(a)portaone.com>
>>To: <serusers(a)lists.iptel.org>
>>Cc: <serdev(a)lists.iptel.org>
>>Sent: Sunday, July 06, 2003 12:16 PM
>>Subject: [Serusers] nathelper updated to support RTP proxy
>>
>>
>>
>>
>>
>>>Folks,
>>>
>>>Today I've updated nathelper module to support RTP proxy. It would
>>>be nice if somebody can test it on platforms other than FreeBSD,
>>>because I don't have an access to such boxes right now. The RTP
>>>proxy itself can be downloaded from:
>>>
>>>https://demo.portaone.com/~sobomax/PortaSIP/rtpproxy/
>>>
>>>Any feedback is greatly appreciated.
>>>
>>>-Maxim
>>>P.S. I've committed it to the HEAD, those with 0.8.11 prerelease
>>>please apply the following patch:
>>>
>>>https://demo.portaone.com/~sobomax/nathelper.diff
>>>
>>>_______________________________________________
>>>Serusers mailing list
>>>serusers(a)lists.iptel.org
>>>http://lists.iptel.org/mailman/listinfo/serusers
>>>
>>>
>>>
>------------------------------------------------------------------------
>
>>_______________________________________________
>>Serusers mailing list
>>serusers(a)lists.iptel.org
>>http://lists.iptel.org/mailman/listinfo/serusers