RE: [Serusers] SER+SERWEB

-----Original Message----- From: serusers-bounces(a)lists.iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of gaillac harry Sent: Thursday, 22 April 2004 10:00 PM To: serusers(a)lists.iptel.org Subject: [Serusers] SER+SERWEB hi all, Here is my ser.cfg. I try to use send IM, missed calls and voicemail but i can't debug my ser.cfg problems with route[2] and acc module in my ser.cfg. Anybody could help me to understand ? # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=9 fork=yes log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 listen=192.168.0.1 children=4 fifo="/tmp/ser_fifo" fifo_mode=0666 #alias="example.com" # ------------------ module:wq loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/acc.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/domain.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/msilo.so" loadmodule "/usr/lib/ser/modules/vm.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("usrloc", "db_mode", 1) #modparam("usrloc", "use_domain", 1) # --register params-- modparam("registrar", "use_domain", 1) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # --domain module-- modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("domain", "db_mode", 1) modparam("domain", "domain_table", "domain") modparam("domain", "domain_col", "domain") # --msilo params-- modparam("msilo", "registrar", "sip:registrar@example.com") modparam("msilo", "db_url", "mysql://ser:heslo@localhost/ser") # --vm params-- modparam("voicemail", "db_url", "mysql://ser:heslo@localhost/ser") # --acc params-- #modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser") #modparam("acc", "db_missed_flag", 3) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (is_from_local()) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("", "subscriber")) { www_challenge("", "0"); break; }; save("location"); m_dump(); break; }; # native SIP destinations are handled using our USRLOC DB lookup("aliases"); if (!lookup("location")) { if (method == "MESSAGE") { route(2); break; }; if ((method=="INVITE" || method=="ACK") && t_newtran() ) { t_reply("404", "Not Found"); route(3); break; }; }; setflag(3); # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP t_on_failure("1"); # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } #route[2] { if (method == "MESSAGE") { if (!t_newtran()) { sl_reply_error(); break; }; if (m_store("0")) { t_reply("202", "Accepted for Later Delivery"); break; }; }; } route[3] { # non-Voip -- just send "off-line" if (!(method=="INVITE" || method=="ACK" || method=="CANCEL")) { sl_send_reply("404", "Not Found"); break; }; if (t_newtran()) { t_reply("404", "Not Found"); # acc_db_request("404 missed call", "missed_calls"); }; }