[SR-Users] Fwd: How to setup Kamailio as P-CSCF/S-CSCF/I-CSCF

Since pcscf.cfg does not have load modules syntax, routing logic, shall we user Kamailio.cfg and just include pcscf.cfg at the top of kamailio.cfg file. Or just we will execute Kamailio as P-CSCF and use only pcscf.cfg as config file. Kindly somebody clarify. Thanks Kamal ---------- Forwarded message ---------- From: Kamal Palei &lt;palei.kamal(a)gmail.com&gt; Date: Mon, Oct 27, 2014 at 5:09 PM Subject: Re: [SR-Users] How to setup Kamailio as P-CSCF/S-CSCF/I-CSCF To: "Kamailio (SER) - Users Mailing List" &lt;sr-users(a)lists.sip-router.org&gt; Thanks a lot Muhammad Shahzad. I hope you want me to do ln -s */usr/local/src/kamailio-4.2.0/examples/pcscf/pcscf.cfg kamailio.cfg* My understanding is that kamailio.cfg will just be a file pointing to pcscf.cfg So the configuration that Kamailio-PCSCF server will get is basically from pcscf.cfg. I checked pcscf.cfg file, and content is quite less (I have copy/pasted here below). There is no request/response routing logic etc in pcscf.cfg. Is that fine or we are missing something. Kindly clarify. *pcscf.cfg content* *# IP-Adress for incoming SIP-Traffic, in the following format:# SIP / UDPlisten=udp:109.239.57.200:5060 <http://109.239.57.200:5060>listen=tcp:109.239.57.200:5060 <http://109.239.57.200:5060># SIP / TCP (Monitoring)listen=tcp:127.0.0.1:5060 <http://127.0.0.1:5060># SIP / TCP/TLS#listen=tls:109.239.57.200:5061 <http://109.239.57.200:5061># SIP / Websocket#listen=tcp:109.239.57.200:80 <http://109.239.57.200:80># SIP / Websocket/TLS#listen=tls:109.239.57.200:443 <http://109.239.57.200:443>alias=pcscf-1.imscore.org <http://pcscf-1.imscore.org>alias=pcscf.imscore.org <http://pcscf.imscore.org>alias=proxy.imscore.org <http://proxy.imscore.org>#alias=tls:"wss-proxy.imscore.org <http://wss-proxy.imscore.org>":443# Port, where we listen to Traffic#!define PORT 5060#!subst "/NETWORKNAME/imscore.org/ <http://imscore.org/>"#!subst "/HOSTNAME/pcscf-1.imscore.org/ <http://pcscf-1.imscore.org/>"#!define HOSTNAME_IP pcscf-1.imscore.org <http://pcscf-1.imscore.org>#!define HOSTNAME_ESC "pcscf-1\.imscore\.org"# SIP-Address of capturing node, if not set, capturing is disabled.#!define CAPTURE_NODE "sip:10.1.8.55"# Allowed IPs for XML-RPC-Queries#!define XMLRPC_WHITELIST_1 "127.0.0.1"##!define XMLRPC_WHITELIST_2 "127.0.0.1"##!define XMLRPC_WHITELIST_3 "127.0.0.1"# Databases:#!define DB_URL "mysql://pcscf:heslo@192.168.5.1/pcscf <http://pcscf:heslo@192.168.5.1/pcscf>"##!define DB_URL "con1=>mysql://pcscf:heslo@192.168.5.1/pcscf <http://pcscf:heslo@192.168.5.1/pcscf>"##!define DB_URL2 "con2=>mysql://pcscf:heslo@10.1.27.217/pcscf <http://pcscf:heslo@10.1.27.217/pcscf>"#! Optional: Server-URL for Websocket-Requests##!define WEBSOCKET_WEBSERVER "phone.imscore.org <http://phone.imscore.org>"# IP-Adress(es) of the RTP-Proxy##!define RTPPROXY_ADDRESS "udp:10.1.2.186:22222 <http://10.1.2.186:22222> udp:10.1.27.217:22222 <http://10.1.27.217:22222>"#!define RTPPROXY_ADDRESS "udp:10.1.2.186:22222 <http://10.1.2.186:22222>"## Several features can be enabled using '#!define WITH_FEATURE' directives:## *** To run in debug mode:# - define WITH_DEBUG## *** To enable nat traversal execute:# - define WITH_NAT# - define the connection to the RTP-Proxy: RTPPROXY_ADDRESS## *** To force alls calls through the RTP-Proxy# - this will automagically enable NAT-Traversal# - define FORCE_RTPRELAY## *** To enable IPv4/IPv6 Translation (RTPProxy)# - this will automagically enable NAT-Traversal# - define WITH_RTPIPV4## *** To enable TCP support execute:# - define WITH_TCP## *** To enable TLS support execute:# - adjust CFGDIR/tls.cfg as needed# - define WITH_TLS# - this will automagically enable TCP## *** To enable XMLRPC support execute:# - define WITH_XMLRPC# - this will automagically enable TCP## *** To enable anti-flood detection execute:# - adjust pike and htable=>ipban settings as needed (default is# block if more than 16 requests in 2 seconds and ban for 300 seconds)# - define WITH_ANTIFLOOD## *** To enable the Rx-Interface:# - Configure Rx-Diameter-Interface in pcscf.xml# - define WITH_RX## *** To enable a Homer SIP-Capter-Node:# - define CAPTURE_NODE with a proper address## *** To enable support for the SEMS-SBC# - define WITH_SBC# - configure dispatcher-list with a set of SBC's## *** To enable support for Websocket# - define WITH_WEBSOCKET# - this will automagically enable TCP## Enabled Features for this host:##!define WITH_DEBUG#!define WITH_NAT#!define FORCE_RTPRELAY##!define WITH_TLS#!define WITH_XMLRPC#!define WITH_ANTIFLOOD##!define WITH_RX##!define WITH_TCP#!define WITH_SBC##!define WITH_WEBSOCKET#!define WITH_IMS_HDR_CACHE#!define WITH_NATPING* On Mon, Oct 27, 2014 at 4:58 PM, Muhammad Shahzad &lt;shaheryarkh(a)gmail.com&gt; wrote: