11 Jun
2008
11 Jun
'08
2:21 p.m.
I had put setflag after t_newtran() previously. Now I moved it before
t_newtran() and got records for INVITE, ACK & BYE for normal call perfectly.
:)
Then I tested for call forwarding scenario. In this case forwarding is set
as below:
90004 -> 90001 -> 90003.
I called 90004 from 90002 and I got 7 records in acc table. 3 INVITEs, 3
BYEs and only single ACK. Shouldn't it log 3 ACK messages?
On Wed, Jun 11, 2008 at 4:32 PM, Bogdan-Andrei Iancu <bogdan(a)voice-system.ro>
wrote:
Be sure you set the accounting flag before any
t_relay() or t_newtran() for
the INVITE. To be sure, try to use log/xlog to put some debugs in your
script and check if the flag is really set before t_relay().
Regards,
Bogdan
Ruchir Lists wrote:
I configured simple acc module to store records
in acc table, set proper
flags. Then tried to call number directly(not with forwarding) but still I
get only BYE record. Any suggestion?
On Wed, Jun 11, 2008 at 2:43 PM, Bogdan-Andrei Iancu <
bogdan(a)voice-system.ro <mailto:bogdan@voice-system.ro>> wrote:
Hi Ruchir,
There are two aspects here:
1) making acc to work - setting the flags and getting the ACC
records
2) enabling multi-leg account and putting more info into the
accounted info
First you should to solve (1) - just getting a simple ACC record
for INVITEs and BYEs (no multi leg accounting) - it this working
for you or you get only BYE acc?
Regards,
Bogdan
Ruchir Lists wrote:
Hi All,
I'm trying to configure OpenSER with multi-leg accounting. I'm
using OpenSER 1.2 & radius. I'm using acc_radius table for
writing cdr records. I've searched through several articles
and mailing list posts about configuring multi-leg accounting
and everywhere they talk about setting up multi-leg-info
parameter of acc module to configure leg source & destination
and setting up accounting flag. But this is not working for
me. I get only BYE record in table if I use this way to write
multiple records for one call in call forwarding scenario. I
managed to get multiple records by calling acc_rad_request on
INVITE, ACK, BYE & CANCEL. For instance, I have 4 users;
90001, 90002, 90003, 90004. The call forwarding is setup as below:
90004 -> 90001 -> 90003.
I dial 90004 from 90002 user and it forwards the call to 90001
& then 90003 and they're connected properlry. However I don't
get leg source/destination properly and also I get 7-8 bye
records for this call. Can anyone guide me in right direction
if I'm doing anything wrong.
Regards,
Ruchir
------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)lists.openser.org <mailto:Users@lists.openser.org>
http://lists.openser.org/cgi-bin/mailman/listinfo/users