24 Oct
2012
24 Oct
'12
12:27 a.m.
I was able to resolve the issue by setting the return domain as a local
domain alias. With the previous setting I had made to forward all non-local
accounts to our gateway domain, this would allow the improper return domain
to be seamlessly switched to the correct domain before being forwarded out
of our server. Now users can have normal two way conversations despite a
poor design by our vendor.
Thanks for a giant push in the right direction!
Ed
On Mon, Oct 22, 2012 at 4:02 PM, Ed Brady <ebrady(a)talkforgood.com> wrote:
I have this all working now. I had previously
configured this as a gateway
and once issues were fixed on our vendor's end, it worked. Is there a
disadvantage to using this method rather than the permissions module?
On a related note (though maybe not related enough), when we get responses
from their system it comes back with a different domain in the URI than
what they require us to send to. When questioned about this they said we
would need to handle it on our end. Is there a common method for checking
the to URI for a particular string (in this case the domain), changing it,
and then forwarding it?
Thanks,
Ed
On Sat, Oct 20, 2012 at 7:23 PM, Vitaliy Aleksandrov <
vitalik.voip(a)gmail.com> wrote:
"Permissions" module should help you.
If allowed ip addresses are kept
in a database you can reload them by MI command without kamailio restart.
As I remember "permissions" module allows to create groups of ip
addresses, so you can create such a group for hosts which you want to
receive MESSAGE requests from.
I tested this example and it worked for me. I was misunderstanding some
of the values and thought they applied to users being registered or not.
I am still uncertain what setting applies to allowing all traffic inbound
from a particular address. Any tips on this would be appreciated.
Thanks,
Ed
On Fri, Oct 19, 2012 at 1:41 PM, Ed Brady <ebrady(a)talkforgood.com> wrote:
I was looking at this logic some more and wanted
to clarify my
configuration. I need to base the R-URI rewrite and MESSAGE forward based
on whether the account exists as a local subscriber or not rather than
whether the user is registered or not. This is connecting to an SMS
provider using SIP.
I excitedly looked into the SMS module but this appears to only be if
you are dealing with a GSM modem and not sending/receiving SIP MESSAGEs
with an SMS gateway.
Any resources you can point me to would be extremely helpful, thanks!
Ed
On Fri, Oct 19, 2012 at 10:42 AM, Ed Brady <ebrady(a)talkforgood.com>wrote;wrote:
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Will this also permit incoming messages from this
domain? Do I need to
add the gateway in any other settings besides the one you outlined?
Thanks,
Ed
On Fri, Oct 19, 2012 at 6:17 AM, Vitaliy Aleksandrov <
vitalik.voip(a)gmail.com> wrote:
> If I understood you right you just need to rewrite R-URI domain and
> forward MESSAGE if a user in not registered.
>
> if (!lookup("location")) {
> switch($retcode) {
> case -1:
> $rd = "gatewaydomain.com";
> t_relay();
> exit;
> default:
> sl_send_reply("404", "Not Found");
> exit;
> }
> }
>
>
> I am trying to route SIP messages to a gateway. I am using SIP MESSAGE
> over UDP as well as the MSILO module for storing messages for users that
> aren't currently logged in. I have read through the Dynamic Routing module
> info but am not able to determine the best way to accomplish the routing I
> require. Our scenario is outlined below.
>
> User A sends a message addressed to "sip:12345678900@mydomain.com"
> Kamailio at mydomain.com checks if 12345678900 is a registered user
> in the system.
> If not, the message header is translated to
>
"sip:12345678900@gatewaydomain..com"<sip:12345678900@gatewaydomain..com>and
forwarded.
> Incoming messages need to be accepted from their IP as well.
>
> It would also be useful if the address came as "
> sip:2345678900@mydomain.com" could be translated to "sip:*1*
> 2345678900(a)gatewaydomain.com"quot;.
>
>
> Is there any built in functionality I can configure for this, or will
> this need to be scripted?
>
>
> Thanks,
> Ed
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users(a)lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>