20 Feb
2018
20 Feb
'18
4:54 p.m.
Yes correct. RTP is good since the OPUS codec is available in both the
sides its getting negotiated. Change your config in side A to take only
PCMA effective.
On Tue, 20 Feb 2018 at 18:05 Denys Pozniak <denys.pozniak(a)crazycall.com>
wrote:
Thank you for the answer, but from "SDP"
point of view everything looks
OK, I think issue is with my config or transcoding engine:
Side A INVITE-> Proxy/Rtpengine:
v=0
o=- 3543840537 1 IN IP4
s=SIPPER for PhonerLite
c=IN IP4 side_a
t=0 0
m=audio 55062 RTP/AVP 107 8
a=rtpmap:107 opus/48000/2
a=rtpmap:8 PCMA/8000
a=ssrc:1792443851
a=sendrecv
Proxy/Rtpengine OK -> Side A:
v=0
o=- 3728121777 3728121778 IN IP4
s=pjmedia
b=AS:50
t=0 0
a=X-nat:0
m=audio 30254 RTP/AVP 8
c=IN IP4 rtpengine
b=TIAS:32000
a=rtpmap:8 PCMA/8000
a=sendrecv
a=rtcp:30255
So here must be PCMA in direction from Proxy/Rtpengine -> Side A, but I
have opus.
On 20 February 2018 at 12:41, Gopalakrishnan N <saigop(a)gmail.com> wrote:
Hi Denys,
Am not much user of Kamilio, but am from Telecom background. The reason
for your case is, in side A you have OPUS and in side B already OPUS is
available and since both has the same codec as first priority it will
negotiate itself with same codec and then it will look for other priority.
Remove OPUS from side A and it will automatically go into transcoding mode.
On Tue, 20 Feb 2018 at 16:17 Denys Pozniak <denys.pozniak(a)crazycall.com>
wrote:
--
BR
Denys Pozniak
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Hello!
Please explain how to achive next:
Side A supports:
OPUS
PCMA
Side B supports:
OPUS
PCMA
PCMU
I need to transcode in direction A->B from PCMA to OPUS?
So should be like this:
A(PCMA) -> (PCMA)Rtpengine(OPUS)->B(OPUS)
I configured like this:
rtpengine_offer("codec-mask-PCMA codec-transcode-opus");
rtpengine_answer("codec-mask-opus codec-transcode-PCMA");
But leg from Rtpengine to A has wrong codec (OPUS):
https://drive.google.com/file/d/14GAIt8lL7Igj9S95b_RS6CXtmGVhjLa1/view
On 19 February 2018 at 13:56, Richard Fuchs <rfuchs(a)sipwise.com> wrote:
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
On 2018-02-19 05:48 AM, Denys Pozniak wrote:
> Hello!
>
> Small note.
> In case of opus use: codec-transcode-opus (opus is lowercase).
>
As explained in the readme, the format generally follows the SDP
format, including specifying sample rate and number of channels. As an
additional parameter, the bitrate can be specified for codecs that support
it.
Examples:
transcode-speex/32000
transcode-opus/48000/2/64000
Cheers
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
BR
Denys Pozniak
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users