Re: [Serusers] How to enable Authentication

Btw, which ser are you using? You should uncomment these lines too #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) Then change things like this "if (!uri==myself)" into this "if

On 5/25/06, Aniruddha Vaidya &lt;anir123(a)gmail.com&gt; wrote: > Nope. > It just says > > "Starting ser: > [ OK ]" > > BUt if try to get the status of the server > > "ser dead but subsys locked" > > Message is displayed! > > > > On 5/25/06, Andrey Kouprianov &lt;andrey.kouprianov(a)gmail.com > wrote: > > what does "ser -c" say? > > > > On 5/25/06, Aniruddha Vaidya &lt;anir123(a)gmail.com&gt; wrote: > > > I did the same > > > But Now when I start with new configuration > > > I get > > > Starting SER : PID file /var/run/ser.pid does not exist -- SER start > failed > > > Error. > > > > > > > > > > > > > > > > > > On 5/25/06, Andrey Kouprianov < andrey.kouprianov(a)gmail.com&gt; wrote: > > > > Read > > > > > > > > # Uncomment this if you want digest authentication > > > > # mysql.so must be loaded ! > > > > #loadmodule "/usr/local/lib/ser/modules/auth.so" > > > > #loadmodule

> > > > > > > > > > > > > > > > > > > > On 5/25/06, Aniruddha Vaidya < anir123(a)gmail.com > wrote: > > > > > Hello All, > > > > > I'm trying to enable the authentication feature in SER. But its

> > > accepted > > > > > by the server. > > > > > This is my ser.cfg file. > > > > > > > > > > Can you tell me whats wrong ? > > > > > > > > > > # > > > > > # $Id: ser.cfg,v 1.25.2.1 2005/02/18 14:30:44 andrei Exp $ > > > > > # > > > > > # simple quick-start config script > > > > > # > > > > > > > > > > # ----------- global configuration parameters > ------------------------ > > > > > > > > > > #debug=3 # debug level (cmd line: -dddddddddd) > > > > > #fork=yes > > > > > #log_stderror=no # (cmd line: -E) > > > > > > > > > > # Uncomment these lines to enter debugging mode > > > > > #fork=no > > > > > #log_stderror=yes > > > > > # > > > > > > > > > > check_via=no # (cmd. line: -v) > > > > > dns=no # (cmd. line: -r) > > > > > rev_dns=no # (cmd. line: -R) > > > > > port=5060 > > > > > children=4 > > > > > fifo="/tmp/ser_fifo" > > > > > > > > > > # ------------------ module loading > > > > > ---------------------------------- > > > > > > > > > > # Uncomment this if you want to use SQL database > > > > > loadmodule

> > > > > > > > > > loadmodule "/usr/local/lib/ser/modules/sl.so" > > > > > loadmodule "/usr/local/lib/ser/modules/tm.so" > > > > > loadmodule "/usr/local/lib/ser/modules/rr.so" > > > > > loadmodule

> > > > > loadmodule

> > > > > loadmodule

> > > > > loadmodule

> > > > > > > > > > # Uncomment this if you want digest authentication > > > > > # mysql.so must be loaded ! > > > > > #loadmodule

> > > > > #loadmodule

> > > > > > > > > > # ----------------- setting module-specific parameters > --------------- > > > > > > > > > > # -- usrloc params -- > > > > > > > > > > #modparam("usrloc", "db_mode", 0) > > > > > > > > > > # Uncomment this if you want to use SQL database > > > > > # for persistent storage and comment the previous line > > > > > modparam("usrloc", "db_mode", 2) > > > > > > > > > > # -- auth params -- > > > > > # Uncomment if you are using auth module > > > > > # > > > > > modparam("auth_db", "calculate_ha1", yes) > > > > > # > > > > > # If you set "calculate_ha1" parameter to yes (which true in

> > > config), > > > > > # uncomment also the following parameter) > > > > > # > > > > > modparam("auth_db", "password_column", "password") > > > > > > > > > > # -- rr params -- > > > > > # add value to ;lr param to make some broken UAs happy > > > > > modparam("rr", "enable_full_lr", 1) > > > > > > > > > > # ------------------------- request routing

> > > ------------------- > > > > > > > > > > # main routing logic > > > > > > > > > > route{ > > > > > > > > > > # initial sanity checks -- messages with > > > > > # max_forwards==0, or excessively long requests > > > > > if (!mf_process_maxfwd_header("10")) { > > > > > sl_send_reply("483","Too Many Hops"); > > > > > break; > > > > > }; > > > > > if (msg:len >= 2048 ) { > > > > > sl_send_reply("513", "Message too big"); > > > > > break; > > > > > }; > > > > > > > > > > > > > > > # we record-route all messages -- to make sure that > > > > > # subsequent messages will go through our proxy; that's > > > > > # particularly good if upstream and downstream entities > > > > > # use different transport protocol > > > > > if (!method=="REGISTER") record_route(); > > > > > > > > > > # subsequent messages withing a dialog should take the > > > > > # path determined by record-routing > > > > > if (loose_route()) { > > > > > # mark routing logic in request > > > > > append_hf("P-hint: rr-enforced\r\n"); > > > > > route(1); > > > > > break; > > > > > }; > > > > > > > > > > if (!uri==myself) { > > > > > # mark routing logic in request > > > > > append_hf("P-hint: outbound\r\n"); > > > > > route(1); > > > > > break; > > > > > }; > > > > > > > > > > # if the request is for other domain use UsrLoc > > > > > # (in case, it does not work, use the following command > > > > > # with proper names and addresses in it) > > > > > if (uri==myself) { > > > > > > > > > > if (method=="REGISTER") { > > > > > > > > > > # Uncomment this if you want to use digest authentication > > > > > if (!www_authorize("<InternalSER>", > > > > > "subscriber")) { > > > > > www_challenge("<InternalSER>", "0"); > > > > > break; > > > > > }; > > > > > > > > > > save("location"); > > > > > break; > > > > > }; > > > > > > > > > > lookup("aliases"); > > > > > if (!uri==myself) { > > > > > append_hf("P-hint: outbound alias\r\n"); > > > > > route(1); > > > > > break; > > > > > }; > > > > > > > > > > # native SIP destinations are handled using our USRLOC

> > > > > if (!lookup("location")) { > > > > > sl_send_reply("404", "Not Found"); > > > > > break; > > > > > }; > > > > > }; > > > > > append_hf("P-hint: usrloc applied\r\n"); > > > > > route(1); > > > > > } > > > > > > > > > > route[1] > > > > > { > > > > > # send it out now; use stateful forwarding as it works

> > > > > # even for UDP2TCP > > > > > if (!t_relay()) { > > > > > sl_reply_error(); > > > > > }; > > > > > } > > > > > > > > > > > > > > > Thanks, > > > > > Aniruddha > > > > > > > > > > _______________________________________________ > > > > > Serusers mailing list > > > > > Serusers(a)lists.iptel.org > > > > >

_______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers