15 Nov
2006
15 Nov
'06
3 p.m.
Hello,
stun is recommended when the client properly implements it and does not
sit behind a symmetric NAT (like linux box). For these cases you need to
use server side nat traversal, look at nathelper/rtpptoxy or
mediaproxy/mediaproxy.
Cheers,
Daniel
On 11/13/06 16:29, raviprakash sunkara wrote:
Hello Users,
Can I use the Stun server to Support the NAT.
I tried a lot , My UAC's are Not Hungupping in Behind the NAT/Router
My SIP ip is 192.168.2.75 <http://192.168.2.75>
My Public IP is xx.xx.xx.xx
I didn't get any Bye request to SIP server, except the Bye all the
other Messages are Requested to MY SIP Server
in openser.cfg
i
I'm using X-lites for testing in that
RTP port 12222
NAT firewall ip is 192.168.2.1 <http://192.168.2.1>
Sip domain is xx.xx.xx.xx
Sip proxy xx.xx.xx.xx
______________________________________________
modparam ("nathelper",rtpproxy_sock","udp: 192.168.2.75:12222
<http://192.168.2.75:12222>"
if(nat_uac_test("19"))
{
if(method=="REGISTER")
{
fix_nated_register();
force_rport();
setflag(6);
} else
{
if(method=="INVITE")
{
fix_nated_sdp("3")
};
fix_nated_contact();
};
};
______________________________________________
--
Thanks and Regards
Ravi Prakash Sunkara
ravi.sunkara(a)hyperion-tech.com <mailto:ravi.sunkara@hyperion-tech.com>
M:+91 9985077535
O:+91 40 23114549
F:+91 40 40208727
ravi.sunkara(a)hyperion-tech.com <mailto:ravi.sunkara@hyperion-tech.com>
www.hyperion-tech.com <http://www.hyperion-tech.com>
------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users