RE: [Serusers] Bye messages not logged

Anyone can help me with the BYE messages that are not being logged? Marc -----Original Message----- From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Marc Khayat Sent: Tuesday, August 30, 2005 12:26 PM To: serusers(a)lists.iptel.org Subject: [Serusers] Bye messages not logged Hi all, I upgraded my system from ser-0.8.14 to ser-0.9.3, and updated my ser.cfg. However, with the new thing, I'm getting INVITE and ACK messages, but no the BYE nor the REGISTER messages. I made no changes to the config file, only added the accounting requirements. But is the below stateful? Here's my ser.cfg: loadmodule "/usr/local/lib/ser/modules/acc.so" modparam("acc", "log_flag", 1 ) modparam("acc", "log_fmt", "miocfst") modparam("acc", "failed_transactions", 1) modparam("acc", "log_missed_flag", 2) modparam("acc", "report_cancels", 1) modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("acc", "db_flag", 5) modparam("acc", "db_missed_flag", 6) # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages within a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); break; }; setflag(5); setflag(6); if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="INVITE") { if (uri=~"^sip:9") { t_relay_to_udp("50.65.11.23", "5060"); break; }; }; if (method=="REGISTER") { # Uncomment this if you want to use digest authentication # if (!www_authorize("mydomain.net", "subscriber")) { # www_challenge("mydomain.net", "0"); # break; # }; save("location"); break; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; append_hf("P-hint: usrloc applied\r\n"); route(1); } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; } _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers