8 Apr
2008
8 Apr
'08
5:32 p.m.
Ricardo Martinez wrote:
Hi Jiri.
Thanks for your answer.
Let me ask one more question.
In the link that you gave me, it said "set adequate memory reporting level in ser
configuration file: memlog must be lower than debug (e.g., memlog=2, debug=3)"
Is ok with memlog=2 and debug=3?
yes
Or i need to add more log level?
This is a production machine with a high load.....
Well then be very careful. Even the memlog can produce lot of stuff. In
such cases I typically enjoy having a load-balancer in front of a small
farm so that if one box behind the load-balancer degrades, the whole
service is largely okay.
-jiri
I will keep waiting for your comments.
Thanks!!
Ricardo Martinez.-
-----Mensaje original-----
De: Jiri Kuthan [mailto:jiri@iptel.org]
Enviado el: lunes, 07 de abril de 2008 19:12
Para: Ricardo Martinez
CC: serusers(a)iptel.org
Asunto: Re: [Serusers] Memory Problems
looks indeed like a memory leak somewhere.
see http://www.iptel.org/ser/problem_reporting
for procedures to spot the problem. (takes recompiling :-(
-jiri
Ricardo Martinez wrote:
Hello.
I'm getting weird memory problems with my SER distribution. I'm using a
ser 0.9.7 with a Fedora Core release 6. I'm also using the LCR module to
do some routing logics.
Since a few months i'm getting Memory errors, like these :
Apr 5 22:00:50 ser[21996]: ERROR: build_req_buf_from_sip_req: out of memory
Apr 5 22:00:50 ser[21996]: ERROR: forward_request: building failed
Apr 5 22:00:58 ser[21996]: ERROR: build_req_buf_from_sip_req: out of memory
Apr 5 22:00:58 ser[21996]: ERROR: print_uac_request: no pkg_mem
Apr 5 22:00:58 ser[21996]: ERROR: t_forward_nonack: failure to add branches
Apr 5 22:01:00 ser[22000]: ERROR: do_action: memory allocation failure
Apr 5 22:01:00 ser[22000]: ERROR:avpops:pushto_avp: SET_XXXX_T action
failed
Apr 5 22:01:00 ser[22000]: ERROR: do_action: memory allocation failure
Apr 5 22:01:00 ser[22000]: next_gw(): ERROR: do_action failed with
return value <-2>
Apr 5 22:01:10 ser[21996]: ERROR: do_action: memory allocation failure
Apr 5 22:01:10 ser[21996]: next_gw(): ERROR: do_action failed with
return value <-2>
Apr 5 22:02:04 ser[22000]: ERROR: build_req_buf_from_sip_req: out of memory
Apr 5 22:02:04 ser[22000]: ERROR: print_uac_request: no pkg_mem
Apr 5 22:02:04 ser[22000]: ERROR: t_forward_nonack: failure to add branches
Apr 5 22:02:04 ser[22000]: ERROR: w_t_relay (failure mode): forwarding
failed
Apr 5 22:07:23 ser[22000]: ERROR: build_res_buf_from_sip_res: out of mem
Apr 5 22:07:23 ser[22000]: ERROR: relay_reply: no mem for outbound reply
buffer
Apr 5 22:07:23 ser[22000]: ERROR: build_res_buf_from_sip_req: out of
memory ; needs 1105
It start to fail with a few calls to finally drop all calls with a total
colapse of resources.
I'm not sure where the problem could be located. Can someone help me here ?
Among other things i do several AVP operations with the RURI to make
some checks.
Thanks
Ricardo Martinez.-
------------------------------------------------------------------------
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers