Re: [SR-Users] Another question about RTPengine module

I looked into rtpengine.cline 1113 - it's a getaddrinfo, and "name or Service not known" - means it returned Non-Zero On Monday, May 16, 2016 9:58 AM, Dmitry &lt;mbike2000ru(a)yahoo.com&gt; wrote: I installed 4.3.5 kamailio (i tried USE_SCTP=0 and USE_SCTP=1) - Also - no problem. rtpengine does not affect kamailio start/restart. Now the only case with the problem:kazoo Kamailio which was installed via RPM. So I wil try to find the cause of it. On Sunday, May 15, 2016 11:24 PM, Dmitry &lt;mbike2000ru(a)yahoo.com&gt; wrote: The problem only with Kamailio installed from Kazoo RPM (ver 4.3.5).  When I instaled latest from GIT - rtpengine does not affect restarting Kamailio.no problem. Up to now no idea how to solve it. On Sunday, May 15, 2016 11:04 PM, Dmitry &lt;mbike2000ru(a)yahoo.com&gt; wrote: the problem is: rtpengine was compiled with  USE_SCTP,but kamailio that was installed via RPM is without this flag. How to tell compiler NOT TO " USE  USE_SCTP" flag? +++++++++++++++++++++++ Makefile.defs:SCTP ?= 0 - and it compiles without sctp. Now kamailio.log:ERROR: rtpengine [rtpengine.c:1113]: child_init(): Name or service not knownERROR: <core> [sr_module.c:929]: init_mod_child(): Error while initializing module rtpengine (/usr/lib64/kamailio/modules/rtpengine.so)   View this message in context: Re: Another question about RTPengine module Sent from the Users mailing list archive at Nabble.com. _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list [hidden email] http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list [hidden email] http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users If you reply to this email, your message will be added to the discussion below: http://sip-router.1086192.n5.nabble.com/Another-question-about-RTPengine-mo… To unsubscribe from Another question about RTPengine module, click here. NAML -- View this message in context: Re: Another question about RTPengine module Sent from the Users mailing list archive at Nabble.com. _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list [hidden email] http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list [hidden email] http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users If you reply to this email, your message will be added to the discussion below: http://sip-router.1086192.n5.nabble.com/Another-question-about-RTPengine-mo… To unsubscribe from Another question about RTPengine module, click here. NAML -- View this message in context: Re: Another question about RTPengine module Sent from the Users mailing list archive at Nabble.com. _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users On Sunday, May 15, 2016 6:21 PM, Dmitry &lt;mbike2000ru(a)yahoo.com&gt; wrote: yes, I wrote that modparam are recognized.MODPARAM must be placed i the sae place where the RTPPROXY resides in the config.+++++++++++++++++++++++++++++++ Another question:kazoo kamailio KAMAILIO-V :4.3.5:kamailio -vversion: kamailio 4.3.5 (x86_64/linux)flags: STATS: Off, USE_TCP, USE_TLS, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, DBG_QM_MALLOC, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RESADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MBpoll method support: poll, epoll_lt, epoll_et, sigio_rt, select.id: unknowncompiled on 17:51:55 Mar  8 2016 with gcc 4.4.7 To add the RTPENGINE - I found Kamailio 4.3.5 sources https://www.kamailio.org/pub/kamailio/4.3.5/src/ When I start kamailio I get the following error:ERROR: <core> [sr_module.c:431]: version_control(): module compile flags mismatch for /usr/lib64/kamailio/modules/rtpengine.so I did the following to add missing modules: #make include_modules="rtpengine topoh" cfg #make all cp /usr/src/kamailio-4.3.5/modules/rtpengine/rtpengine.so /usr/lib64/kamailio/modules/rtpengine.so How to fix it? The sources version seems to be the same On Saturday, May 14, 2016 1:21 AM, ycaner &lt;yasin.caner(a)netgsm.com.tr&gt; wrote: Hello;     i am not sure. i downloaded from git kamailio. add rtpengine instead of rtpproxy . it works fine. it is hard to solve problem without log. Cheers. try to run with kamailio -E -dd  , maybe it gives information. check kamailio.cfg is that rtpengine is loaded like loadmodule "rtpengine.so" 2016-05-13 11:35 tarihinde Dmitry [via SIP Router] yazdı: one more question about rtpengine. I installed Kamailio (centos 6.7) from source as You recommended make include_modules="db_mysql utils regex dnssec jansson lcr  xmlrpc rtpengine " cfg no rtpengine daemon (it is not installed)  but the picture is the same:  modparam ("rtpengine,....)  kamailio -c loading modules under config path: /usr/local/lib64/kamailio/modules/  0(19523) ERROR: <core> [modparam.c:150]: set_mod_param_regex(): No module matching <rtpengine> found it means that it does not depend upon rtpengine daemon. # single rtproxy modparam("rtpengine", "rtpengine_sock", "udp:localhost:12221") I copied it from http://www.kamailio.net/docs/modules/4.2.x/modules/rtpengine.html STRACE kamctl start  -says nothing anout rtpengine What else is it possible to do to find the cause of the problem? On Friday, May 13, 2016 11:45 AM, ycaner <[hidden email]> wrote: Hello;     rtpengine module isnt default. you need to add  with "make include_modules". after make && make install , automatically it will be copied to lib/modules. Cheers. 2016-05-13 09:42 tarihinde Dmitry [via SIP Router] yazdı: And one more question on it: If the Kamailio was installed from RPM and rtpengine.so is missing - May I add rtpengine.so the following way: make include_modules="rtpengine" cfg make all and then copy rtpengine.so     to /modules/ directory Is this way (adding missing modules) is correct? On Friday, May 13, 2016 11:25 AM, Dmitry <[hidden email]> wrote: hello I tested on Centos 6.7 as well as Ubuntu server - the problem is the same. RTPENGINE was installed both from dpkg and from Source (manual compilation) So I need a clarification on it. RTPENGINE daemon is started. The Kamailio module itself is taken from /usr/src/kamailio, where the source was compiled. mpath="/usr/lib/x86_64-linux-gnu/kamailio/modules/" cp /usr/src/kamailio/modules/rtpengine/rtpengine.so /usr/lib/x86_64-linux-gnu/kamailio/modules/rtpengine.so        sudo /etc/init.d/kamailio restart | grep rtp ERROR: <core> [modparam.c:163]: set_mod_param_regex(): set_mod_param_regex: No module matching <rtpengine> found     version: kamailio 5.0.0-dev4 (x86_64/linux)  Any help is appreciated.                                             On Thursday, May 12, 2016 6:04 PM, Dmitry <[hidden email]> wrote: Hi, I installed Kamailio from GIT. I did make include_modules="db_mysql utils regex dnssec jansson lcr xmlrpc rtpengine " cfg Actually loadmodule "rtpengine.so" does not affect kamailio start/restart. modparam("rtpengine", "rtpengine_sock", "udp:localhost:12221") causes this failure: [modparam.c:150]: set_mod_param_regex(): No module matching <rtpengine> found On Thursday, May 12, 2016 12:26 PM, ycaner <[hidden email]> wrote: Hello;     on bash , kamailio -V gives Version , kamailio -c gives debug result. you can ask from here  https://groups.google.com/forum/#!forum/2600hz-dev for kazoo rpm. if there is something wrong , they will fix it. you can install from source code from here => https://www.kamailio.org/w/ and "make include_modules="db_mysql utils regex dnssec jansson lcr xmlrpc rtpengine " cfg " in kamailio folder before 'make all' , helps you add modules. if there is a dependecies is missing , gives error. Cheers. 2016-05-11 19:51 tarihinde Dmitry [via SIP Router] yazdı: I installed Kamailio : yum install -y kazoo-kamailio https://2600hz.atlassian.net/wiki/display/Dedicated/via+RPM git clone https://github.com/sipwise/rtpengine.git the latest version of rtpengine and I do not know how to view the version of Kazoo-Kamailio On Wednesday, May 11, 2016 6:31 PM, ycaner <[hidden email]> wrote: hello ; maybe some devel are missing. which version using?i will try. cheers. -- View this message in context: http://sip-router.1086192.n5.nabble.com/Another-question-about-RTPengine-mo… Sent from the Users mailing list archive at Nabble.com. _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list [hidden email] http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list [hidden email] http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users If you reply to this email, your message will be added to the discussion below: http://sip-router.1086192.n5.nabble.com/Another-question-about-RTPengine-mo… To unsubscribe from Another question about RTPengine module, click here. NAML --