Hi Inaki:
start rtpproxy like this:
rtpproxy -l 85.76.0.110 -s udp:127.0.0.1:22222
and set the nathelper param like this:
modparam("nathelper", "rtpproxy_sock",
"udp:127.0.0.1:22222")
Regards,
Ovidiu Sas
On 10/26/07, Iñaki Baz Castillo <ibc(a)in.ilimit.es> wrote:
El Friday 26 October 2007 02:05:05 Ricardo Ferreira -
MC escribió:
> Any help please? I don't see any new
mandatory parameter or similar in
> module doc, what can be wrong if it worked with OpenSer 1.2.2?
Change from 127.0.0.1 to the real IP address of
your sip server, change
the openser.cfg accordingly and reload it.... it should work....
Thanks but in doesn't work. In fact I already tryed to conect with a RtpProxy
running in other host with same error.
Now I've tryed to run it in localhost but setting the public IP:
modparam("nathelper", "rtpproxy_sock",
"udp:85.76.0.110:22222")
~# rtpproxy -f -l 0.0.0.0 -s udp:85.76.0.110:22222
Exactly the same error:
INFO:nathelper:rtpp_test: rtp proxy <udp:85.76.0.110:22222> found, support for
it enabled
ERROR:nathelper:send_rtpp_command: can't read reply from a RTP proxy
ERROR:nathelper:send_rtpp_command: proxy <udp:85.76.0.110:22222> does not
respond, disable it
WARNING:nathelper:rtpp_test: can't get version of the RTP proxy
WARNING:nathelper:rtpp_test: support for RTP proxy <udp:85.76.0.110:22222> has
been disabled temporarily
And RtpProxy says:
received command "1886_0 V"
sending reply "1886_0 20040107
"
received command "1886_1 VF 20050322"
sending reply "1886_1 1
"
received command "1887_0 V"
sending reply "1887_0 20040107
"
received command "1888_0 V"
sending reply "1888_0 20040107
The same configuration worked perfectly in OpenSer 1.2.2 (now I use the SVN
2983 reversion).
Please help, I don't know what more I can try.
Thanks in advance.
--
Iñaki Baz Castillo
ibc(a)in.ilimit.es
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users