Do you have debug=8 # debug level (cmd line: -dddddddddd) fork=no log_stderror=yes # (cmd line: -E)
in your ser.cfg ? if not then have a look in syslog and see if its logged the details there.
Vince
------------------------------------- mnet Internet Limited Support Services
Helpdesk: 0870 3335577 Fax: +44 (0)20 7324 3900 Email: support@mnet.co.uk Web: www.mnet.co.uk
132-140 Goswell Road London EC1V 7DY
-----Original Message----- From: Giuseppe Parlato [mailto:gparlato@tnet.it] Sent: 24 May 2006 15:30 To: Tobias Lindgren Cc: serusers@iptel.org Subject: Re: [Serusers] backup route
Starting ser: ERROR: bad config file (2 errors)
ser -c ..... config file ok, exiting... !!!really going crazy
Giuseppe
----- Original Message ----- From: "Tobias Lindgren" tobias.lindgren@ip-only.se To: "Giuseppe Parlato" gparlato@tnet.it Cc: <> Sent: Wednesday, May 24, 2006 4:19 PM Subject: Re: [Serusers] backup route
Hi,
"ser -c" will tell you exactly which row that's not correct, also it will in many cases tell you what you have done wrong.
Br, Tobias
Giuseppe Parlato said the following on 2006-05-24 16:11:
help please, I'm going crazy. I still get 2 errors... where? the new configuration:
if (lookup("location")) { rewritehost("mydomain.com"); } else { if ((uri=~"^sip:6200[0-9]+@") && (!uri=~"^sip:6200200@") && (!uri=~"^sip:6200100@") ) { rewritehost("routerA"); forward(uri:host, uri:port); break; } else { if ((uri=~"^sip:80[0-9]+@") | (uri=~"^sip:1[0-9][0-9]@")
|
(uri=~"^sip:1515@")) { route(3); break; } }; };
route[3] { rewritehost("routerB"); forward(uri:host, uri:port); t_on_failure("3"); t_relay(); }
failure_route[3] { rewritehost("routerC"); forward(uri:host, uri:port); append_branch(); t_relay(); }
how do I have to use } or }; ??
Giuseppe
----- Original Message ----- From: "Giuseppe Parlato" gparlato@tnet.it To: serusers@iptel.org Cc: "Tobias Lindgren" tobias.lindgren@ip-only.se Sent: Tuesday, May 23, 2006 1:20 PM Subject: Re: [Serusers] backup route
yes.. t_on_failure is "4" .. but when I restart ser I get 8 errors
in
config file, is there any way to check where these errors are?
route[3] {
if ((uri=~"^sip:80[0-9]+@") | (uri=~"^sip:1[0-9][0-9]@") |(uri=~"^sip:1515@")) { route(4); }
route[4] { rewritehost("routerA cisco IP"); forward(uri:host, uri:port); t_on_failure("4"); t_relay(); }
failure_route[4] { rewritehost("routerB cisco IP"); forward(uri:host, uri:port); append_branch(); t_relay(); }
Giuseppe
----- Original Message ----- From: "Tobias Lindgren" tobias.lindgren@ip-only.se To: "Giuseppe Parlato" gparlato@tnet.it Cc: serusers@iptel.org Sent: Tuesday, May 23, 2006 12:39 PM Subject: Re: [Serusers] backup route
Yep, that works fine.
But t_on_failuer("X") == failure_route[X], so t_on_failure should
be 4,
if you use failure_route[4].
/T
Giuseppe Parlato said the following on 2006-05-23 12:25:
actually this is a subroute..
route[3] { if ((uri=~"^sip:80[0-9]+@") | (uri=~"^sip:1[0-9][0-9]@") | (uri=~"^sip:1515@")) { rewritehost("ip"); forward(uri:host, uri:port); break; };
.. called by he main route
if ((uri=~"^sip:1200[0-9]+@") && (!uri=~"^sip:1200200@") && (!uri=~"^sip:1200100@") ) { rewritehost("ip"); forward(uri:host, uri:port); break;
} else { route(3); break;..can I do like this?? call a subroute [4] from e subroute [3]?
if ((uri=~"^sip:80[0-9]+@") | (uri=~"^sip:1[0-9][0-9]@") | (uri=~"^sip:1515@")) { route(4); } route[4] { rewritehostport("192.168.0.1:5060"); t_on_failure("1"); t_relay(); }
failure_route[4] { rewritehostport("192.168.0.2:5060"); append_branch(); t_relay(); }
Giuseppe
----- Original Message ----- From: "Tobias Lindgren" tobias.lindgren@ip-only.se To: "Giuseppe Parlato" gparlato@tnet.it Cc: serusers@iptel.org Sent: Tuesday, May 23, 2006 9:56 AM Subject: Re: [Serusers] backup route
Hello,
You can use the "route[]" and "failure_route[]" functions in
ser.cfg.
A short example: if ((uri=~"^sip:80[0-9]+@") | (uri=~"^sip:1[0-9][0-9]@") | (uri=~"^sip:1515@")) { route(1); } route[1] { rewritehostport("192.168.0.1:5060"); t_on_failure("1"); t_relay(); }
failure_route[1] { rewritehostport("192.168.0.2:5060"); append_branch(); t_relay(); }
This above would relay on that you have the "tm.so" module
loaded.
Also, the tm-module has some parameters for timeouts and stuff (such as fr_timer) which you should laborate with.
Good luck!
Br, Tobias
Giuseppe Parlato said the following on 2006-05-22 18:04: > When calling some numbers I have to forward calls to a router > cisco (then it wil forward calls out through isdn) or to a
backup
> router > cisco if the first one is busy. The route to primary cisco
router
> works > but I don't know how to implement the backup route in ser.cfg ?
how
> can > I configure a backup route in sip server? > I hope someone can answer me soon, I'm in trouble :| > > > if ((uri=~"^sip:80[0-9]+@") | (uri=~"^sip:1[0-9][0-9]@") | > (uri=~"^sip:1515@")) { > rewritehost("router IP"); > forward(uri:host, uri:port); > break; > }; > > Thanks > > Giuseppe > > >
------------------------------------------------------------------------
> > _______________________________________________ > Serusers mailing list > Serusers@iptel.org > http://mail.iptel.org/mailman/listinfo/serusers
-- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.392 / Virus Database: 268.6.1/344 - Release Date: 19/05/2006
-- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.392 / Virus Database: 268.7.0/345 - Release Date: 22/05/2006
-- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.7.0/346 - Release Date:
23/05/2006
_______________________________________________ Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
This message has been scanned for viruses by 3Labs - www.mnet.net.uk