Re: [SR-Users] Dispatcher Crash when all hosts are invalid

Yes, I do. ------------------------------------------------------------------------ Date: Fri, 3 Dec 2010 10:31:51 +0100 From: miconda(a)gmail.com To: mrraptor98(a)hotmail.com CC: sr-users(a)lists.sip-router.org Subject: Re: [SR-Users] Dispatcher Crash when all hosts are invalid Hello, do you have parameter use_default set to 1? Cheers, Daniel On 12/3/10 6:47 AM, Eric Hiller wrote: Dispatcher crashes everytime guaranteed if there is a single dead host kamailio exits with a core dump (see below). If there are two dead hosts entire kamailio locks up (no core dump). Any ideas on this one? The invalid flag is never marked in the DB btw. Crashes at ds_select_dst having never reached "COMPLETED FIRST DST LOOKUP" # ------------------------- request routing logic ------------------- # main routing logic # ------------------ route{ # initial checks if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; xlog("[$TF] VALID RECV $rm\n $fu ($si:$sp) to $ru\n"); $avp(orig_du) = $du; if($(fU{s.select,1,-})){ # from a user-formed message $avp(user) = $(fU{s.select,0,-}); xlog(" USER $avp(user) DETECTED\n"); } if(pv_isset("$avp(user)") && !ds_is_from_list()){ # from client # route to client PBX if(method == "REGISTER"){ route(3); } else { route(1); } } if(ds_is_from_list()){ # from client, outbound from pbx xlog(" IS FROM PBX\n"); if(is_e164($rU)){ xlog(" IS E164"); # all pbx-pbx traffic should be in user format # since this is pbx-non-pbx send it to gateway # gateway only takes E164 route(2); } if($(rU{s.select,0,-})){ # send directly from pbx to client route(4); } } if($si == "GATEWAY_IP_ADDRESS"){ # lookup enum # route to appropriate pbx via DISPATCHER based on user returned xlog(" CALL FROM GATEWAY\n"); } } route[1]{ route(3); xlog(" ROUTED to $avp(user) PBX\n"); ds_select_dst($avp(user),"7"); xlog(" COMPLETED FIRST DST LOOKUP\n"); if($avp(orig_rd) == $rd){ exec("kamctl dispatcher reload"); ds_select_dst($avp(user),"9"); } xlog(" host is now $rd; all is $ru || $du\n"); if($avp(orig_du) != $du){ t_on_failure("1"); if(!t_relay()){ xlog(" T_RELAY() FAILED\n"); sl_reply_error(); } } else { xlog(" RELOAD STILL YIELDED NOTHING\n"); } } route[2]{ xlog(" Sending to gateway..."); #$rd = "GATEWAY"; } route[3]{ #register if(!www_authorize("domain.net","subscriber")){ www_challenge("domain.net","0"); return; } else { xlog(" AUTHENTICATED $avp(user)\n"); save("location"); return; } } route[4]{ $rU = "2-1"; #$rd = "10.1.40.7"; #$rp = "16314"; lookup("location"); xlog(" ROUTING TO USER $rU\n"); forward(); } failure_route[1]{ xlog(" FAILED FAILURE_ROUTE[1]\n"); if(t_any_timeout()){ xlog(" MARKING DEAD HOST $du\n"); ds_mark_dst(); xlog(" TIMEOUT!\n"); } } 0(2934) ERROR: <script>: [Thu Dec 2 20:15:34 2010] VALID RECV REGISTER sip:3-1@domain.com (10.1.40.7:43899) to sip:domain.com 0(2934) ERROR: <script>: USER 3 DETECTED 0(2934) ERROR: <script>: ROUTED to 3 PBX 0(2934) ERROR: <script>: mark#1 0(2934) ERROR: <script>: host is now domain.com; all is sip:domain.com || sip:xxx.xxx.xxx.166:5060 0(2934) ERROR: <script>: [Thu Dec 2 20:15:35 2010] VALID RECV REGISTER sip:3-1@domain.com (10.1.40.7:43899) to sip:domain.com 0(2934) ERROR: <script>: USER 3 DETECTED 0(2934) ERROR: <script>: ROUTED to 3 PBX 0(2934) ERROR: <script>: mark#1 0(2934) ERROR: <script>: host is now domain.com; all is sip:domain.com || sip:xxx.xxx.xxx.166:5060 1(2935) ERROR: <script>: FAILED FAILURE_ROUTE[1] 1(2935) ERROR: <script>: MARKING DEAD HOST sip:xxx.xxx.xxx.166:5060 1(2935) ERROR: <script>: TIMEOUT! 0(2934) ERROR: <script>: [Thu Dec 2 20:15:50 2010] VALID RECV REGISTER sip:3-1@domain.com (10.1.40.7:29372) to sip:domain.com 0(2934) ERROR: <script>: USER 3 DETECTED 0(2934) ERROR: <script>: ROUTED to 3 PBX 0(2934) ERROR: <script>: mark#1 0(2934) ERROR: <script>: host is now domain.com; all is sip:domain.com || sip:xxx.xxx.xxx.165:5060 0(2934) ERROR: <script>: [Thu Dec 2 20:15:50 2010] VALID RECV REGISTER sip:3-1@domain.com (10.1.40.7:29372) to sip:domain.com 0(2934) ERROR: <script>: USER 3 DETECTED 0(2934) ERROR: <script>: ROUTED to 3 PBX 0(2934) ERROR: <script>: mark#1 0(2934) ERROR: <script>: host is now domain.com; all is sip:domain.com || sip:xxx.xxx.xxx.165:5060 1(2935) ERROR: <script>: FAILED FAILURE_ROUTE[1] 1(2935) ERROR: <script>: MARKING DEAD HOST sip:xxx.xxx.xxx.165:5060 1(2935) ERROR: <script>: TIMEOUT! 0(2934) ERROR: <script>: [Thu Dec 2 20:15:55 2010] VALID RECV REGISTER sip:3-1@domain.com (10.1.40.7:29373) to sip:domain.com 0(2934) ERROR: <script>: USER 3 DETECTED 0(2934) ERROR: <script>: ROUTED to 3 PBX :::::Core file from crash with 1 invalid host::::: Program terminated with signal 8, Arithmetic exception. #0 0x0069e92b in ds_select_dst (msg=0x82ffb00, set=2, alg=7, mode=0) at dispatch.c:1720 1720 i = (i+1)%(idx->nr-1); Thanks for any help on this one! -Eric _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users -- Daniel-Constantin Mierla Kamailio (OpenSER) Advanced Training Jan 24-26, 2011, Irvine, CA, USA http://www.asipto.com _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users