7 Apr
2006
7 Apr
'06
12:07 p.m.
Hello,
thanks for your help. I entered a new line in my openser.cfg:
modparam("usrloc", "use_domain", 1)
but when I start openser (through Monit service manager) it crashes.
If I set the parameter value=0 it works fine but, of course, the domain is not populated
into location table.
Could you please give me any advice?
Thanks
Alessandro
---------- Initial Header -----------
From : "Bogdan-Andrei Iancu"
bogdan(a)voice-system.ro
To : "Christophe Irles"
christophe.irles(a)alcatel.fr
Cc : buxalex(a)libero.it,"users" users(a)openser.org
Date : Thu, 06 Apr 2006 19:34:51 +0300
Subject : Re: [Users] aut_db module and realm
Hi,
just as an add-on...to have the domain column populated in location
table, you need to set the "use_domain" param in location module. See:
http://openser.org/docs/modules/1.0.x/usrloc.html#AEN195
regards,
bogdan
Christophe Irles wrote:
Hello,
command [ modparam("auth_db", "domain_column", "domain") ]
is used to
indicate to auth_db module the name of the column to use to retrieve the
domain associated to an user in the "subcriber" table (table name use
generally by default in auth_db).
This table is filled by the administrator to grant access
The "location" is filled by openSER when user registered on openSER based of
info given by UA. So it's possible to have location.domain !=
subscriber.domain if the settings of the UA is not performed correctly.
Field location.received contains this data SIP:IP:PORT of the UA device
Hope this helps,
Christophe
-----Message d'origine-----
De : users-bounces(a)openser.org [mailto:users-bounces@openser.org] De la part
de buxalex(a)libero.it
Envoyé : jeudi 6 avril 2006 16:38
À : users
Objet : [Users] aut_db module and realm
Hello to everybody,
I configured the openser.cfg as follow:
#-----------------------------------
# AUT_DB parameters
#----------------------------------
modparam("auth_db", "db_url",
"mysql://openser:openser@localhost/openser")
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db",
"domain_column", "domain") modparam("auth_db",
"user_column", "phone")
modparam("auth_db", "password_column", "password")
In this way openser checks for authentication the phone number instead of
the username (it works fine!!). My problem is realted to domain. Entering
the modparam(.....,"domain") I was expecting to see the domain column
populated in the table location, but it doesn't happen. Do I have to
configure something else? Moreover, anybody could explain me the meaning of
the column location.received?
thanks in advance
Alessandro
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users